inode aon WL500g

[Shadow23]

Dear all,

I have a Problem to config the WL-500g with one of our local ISP´s in Austria.
i found nothing to solve this problem on the net...

For a working configuration i must get a dynamic IP-Adress from my Provider
(z.b. 172.16.125.137/24, GW: 172.16.125.1)
and connect via PPTP (Host 10.0.0.138)


i have tried it with a other provider (Aonline) that used a fixed ip adress
(10.0.0.140/24) and connect via PPTP (Host 10.0.0.138)
(i wrote the host in the field "Gataway" in the WLAN & LAN config)
it works fine with this configuration, but wrong provider...


can anyone help me to solve this problem?

Thank´s

Martin

[Pirat]

Hallo Martin!

@all: excuse for writing german, but 4 2 Austrian it is easyer! ;-)

@Shadow23:
Also für Aon ist's ganz einfach, brauche aber noch ein paar infos von Dir:
Welche Firmware?
Welches ADSL-Modem?

Gruß aus Graz

Hans Peter

[Antiloop]

rather discuss this via PM, or try to add a translation

afaik the german language and that is below zero, even i can almost read it so won't be so hard to write in english

thank you :)

[Pirat]

@Antiloop: you are right.

@Martin: you can send me a PN in german.

[Shadow23]

I have read a Page about the Firmware (http://wl500g.dyndns.org/)

There is a info to write 0.0.0.0 in the IP-Adress field to get
the IP-Adress via DHCP.

This works fine, but i don´t get the gateway and without it i don´t get to my
VPN-Host...

The problem is, i must write the VPN-Host adress in the GATEWAY-Field in the configutation-screen.

is there anyone who knows how to fix it (maybe manual in the Console)?


Thanks and best regards

Martin

[Pirat]

IT WORKS!!!!!!!!!

My Settings:
IP: 0.0.0.0
Gateway: 10.0.0.138

then telnet and enter this: "route add 10.0.0.138 eth1"

FINISH!!
But after rebooting router, you must reenter "route add 10.0.0.0138 eth1"

[lexi]

That's only half the way... at evry dhcp renew you loose the connection and you have to correct the routing table. That happens every 11 hours.

I have an slightly modified version of oleg's 1.7.5.9-2 that works for me with the zyxel 645 and the zyxel 650. My rourer is now online for anout 1 day and 20 hours.

If you want to give it a try mail me (alex @ astech dot at).

[Pirat]

That's only half the way... at evry dhcp renew you loose the connection and you have to correct the routing table. That happens every 11 hours.

I have an slightly modified version of oleg's 1.7.5.9-2 that works for me with the zyxel 645 and the zyxel 650. My rourer is now online for anout 1 day and 20 hours.

If you want to give it a try mail me (alex @ astech dot at).
My Router is up since last posting and I have nothing to renew.

[Pirat]

Sorry, I forget that I have restartet the router, cause I changed some settings. @lexi: you are right, it dosn't work after 11 hours.

[Antiloop]

nice work if it works

maybe you can make a simple howto for other inode(or whatever it name is) users

(place it in the HowTo Forum :) )

[lexi]

I'll mail Oleg the patches, after some testing