devolo microlink 56k fun lan (pppoe)

[loehken]

hello,
i've got the following problem.
I connect to my wl500gx, which is home gateway mode, wireless. linked to one of the lan ports is an devolo microlink 56k fun lan modem. the pc connects per dial-up adapter on pppoe to the modem. initializitation and dialing is no problem.

the problem is, that the whole traffic is not transfered through the wirless adapter but through the wired connection to the router. if i unplug the wired connection from router to pc, the initialization of the modem works, but any other data does not reach the pc.

i suggest that the router does not route the data from the modem back to the channel opened by the wlan adapter of the pc.

perhaps i may be able to set up a static route, but i have no clue how to do this especially the interface option is somehow tricky for me.

my settings :
wlan adapter : 192.168.1.61
lan adapter : 192.168.62
modem does not get any static ip and has no web access.

thanks for your help.

[loehken]

i've tried to connect through the wlan adapter of the laptop to the modem attached to the wan port of the router. the modem is connected to the isp ans the wlan adapter to the router, but its impossible to reach the internet from the laptop but possible from the lan adapter of the laptop.

posted beneath is the routing table.

Destination Gateway Genmask Flags Metric Ref Use Iface
62.53.134.97 * 255.255.255.255 UH 0 0 0 WAN ppp0
62.53.134.97 * 255.255.255.255 UH 0 0 0 WAN ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 LAN br0
1.0.0.0 * 255.0.0.0 U 0 0 0 WAN vlan1
default 62.53.134.97 0.0.0.0 UG 0 0 0 WAN ppp0

still mac-adresses are associated to fixed ips as mentioned above.
internett-firewalls disabled, newest firmware of oleg used.

[loehken]

http://wl500g.info/showthread.php?t=2018&highlight=internet+wlan