digitaldisaster
04-01-2006, 04:18
I purchasd cancelled my order for a Linksys WRT54G and purchased a WL-500G Deluxe after reading that it supported multiple SSIDs (and that the Linksys V5 boxes were not running Linux - I will eventually need to be able to customise the firmware and use the USB ports) however I have only seen this mentioned in passing and was wondering if there is any more in depth info available anywhere (sorry if it has already been asked but I could not find it anywhere with the search - kept turning up samba guest account configs).
So far the only info I have round is the brief tutorial on what NVRAM settings need to be change in the OpenWRT firmware wiki. Using the hidden admin page I found the /www/Advanced_WirelessGuest_Content.asp page but changing the settings here seems to have no effect. Do setings elsewhere need to be changed and why isn't this available from the normal GUI? I am using the 1.9.5.0 firmware BTW.
So far the only info I have round is the brief tutorial on what NVRAM settings need to be change in the OpenWRT firmware wiki. Using the hidden admin page I found the /www/Advanced_WirelessGuest_Content.asp page but changing the settings here seems to have no effect. Do setings elsewhere need to be changed and why isn't this available from the normal GUI? I am using the 1.9.5.0 firmware BTW.