Bekijk de volledige versie : usb hdd problems
hello,
i tried to use an external hdd case with an ibm hdd with my 500g, but I can`t login via ftp. what could be the problem? I´m neebie :-(
and what means that?
Apr 28 19:14:20 WL500g user.warn klogd: Vendor: IBM-DJNA Model: -351520 Rev: 0811
Apr 28 19:14:20 WL500g user.warn klogd: Type: Direct-Access ANSI SCSI revision: 02
Apr 28 19:14:20 WL500g user.warn klogd: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Apr 28 19:14:20 WL500g user.warn klogd: SCSI device sda: 30033360 512-byte hdwr sectors (15377 MB)
- andy
Log looks perfectly normal. Are you sure your hd isn't formatted ntfs?
Ok...
really stupid question, but it has to be asked. ;)
Did you set the "Enable FTP Server" to "yes" in the USB Application/FTP Server page?
Royan
Ok...
really stupid question, but it has to be asked. ;)
Did you set the "Enable FTP Server" to "yes" in the USB Application/FTP Server page?
Royan
yes :-)
and its fat-formatet.
- andy
Antiloop
29-04-2004, 09:04
ok try this:
open this page
http://my.router/Main_AdmStatus_Content.asp
be sure your harddisk contains data/directories
enter this command:
ls /mnt/usbfs/
and press REFRESH button Enter only will not work.
if you see nothing enter this command:
mount
presh REFRESH again ofcourse.
copy and paste the output here please
ls /mnt/usbfs/
no response ;-)
if you see nothing enter this command:
mount
/dev/root on / type cramfs (ro)
none on /dev type devfs (rw)
none on /proc type proc (rw)
/ramfs on /mnt/ramfs type ramfs (rw)
- andy
goudkamp74
30-04-2004, 09:43
I've got exactly the same problem. How do you mount the disk manually ?
Antiloop
30-04-2004, 11:52
ok, so nothing is mounted
try those commands and copy the output here:
ls /dev/scsi/host0/bus0/target0/lun0/
ls /dev/scsi/
cat /proc/partitions
ls /dev/scsi/host0/bus0/target0/lun0/
disc
part1
part2
part3
part4
ls /dev/scsi/
host0
cat /proc/partitions[/QUOTE]
major minor #blocks name
8 0 15016680 scsi/host0/bus0/target0/lun0/disc
8 1 839922362 scsi/host0/bus0/target0/lun0/part1
8 2 269488144 scsi/host0/bus0/target0/lun0/part2
8 3 699181456 scsi/host0/bus0/target0/lun0/part3
8 4 10668 scsi/host0/bus0/target0/lun0/part4
try
mount -t vfat /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usbfs
or
mount -t ntfs /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usbfs
try
mount -t vfat /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usbfs
or
mount -t ntfs /dev/scsi/host0/bus0/target0/lun0/part1 /mnt/usbfs
nothing happens....
Antiloop
01-05-2004, 13:18
nothing happens....
try after applying the commands from oleg
ls /mnt/usbfs/
make sure there are some files at partition1
try after applying the commands from oleg
ls /mnt/usbfs/
make sure there are some files at partition1
after olegs commands my browser hangs up and with your command i get no response :-(
Antiloop
01-05-2004, 16:38
ok, anyway your problem is almost for sure in the partitioning. so make sure you have 1 PRIMARY partition (it may not be logical!)
you can use Partition Magic 8 to do this eventually (windows xp does not support fat32 bigger than 32gb or something)
after you've done this hook up your usb drive to your wl500g, and reboot it.
and try again
should be working then
partition manager says:
1 primary partition
mounted as "drive z"
fat32
14,3gb space
that should be right but it doesn`t work :(
- andy
Antiloop
01-05-2004, 20:39
can you please post a screenshot of that?
can you please post a screenshot of that?
Partition (http://www.kleiser.info/partition.jpg)
Antiloop
02-05-2004, 18:30
see attached please, that's how it should be
your router reports more partitions.. so something should be wrong
edit: didn't see your last post.. try Partition Magic instead please
i tried it with a new hd and it works finde now :-)
thank you very much!
- andy
I'm using the latest firmware for WL-500g and attached one usb HDD but how could I change it form ro to rw??
[local_adm@WL500g /proc]$ mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/discs/disc0/part1 on /tmp/harddisk type ntfs (ro,sync)
It could find my usb hdd and auto mount to /tmp/harddisk but I don't know how to change the type to rw.
And does it will effect the samba setting? Because my samba also can't work for now.
Thanks,
Simon
/dev/discs/disc0/part1 on /tmp/harddisk type ntfs
It seems that your drive is formated in ntfs, backup your data and reformat it using FAT....
NTFS volumes are mounted as readonly.....