hggomes
15-06-2014, 03:28
ASUS ROUTERS CFE DUMPS COLLECTION (http://forums.smallnetbuilder.com/showthread.php?t=17793)
================================
I'm creating this thread just because it would be interesting testing old vs recent CFE versions on devices
in order to see the real differences, it's well know that some CFE versions don't allow some settings.
Ex: New CFE's don't allow setting RT-AC68U at 800MHZ DDR3 speed and older versions allow it,
wireless channels region unlocking, etc.
NOTE: Different CFE and HW Revision version can have impact on OC capability.
Check your CFE version at:
http://192.168.1.1/Tools_Sysinfo.asp
Or via Telnet/SSH:
nvram get bl_version
http://forums.smallnetbuilder.com/showthread.php?t=17793
MIPS
=====
RT-N66U B1 (MIPS) - (Known HW Revisions: 3.00, 3.20)
1.0.1.1 (US) (https://mega.co.nz/#!55hAkaQI!EDuz-zE5vM-gRHQLSeXo1OnhUzMPQ8tjBXygBWVnyNQ)
1.0.1.2 (EU) (https://mega.co.nz/#!JtAAgTJD!Qq3YnYfF-GBaLbMFNr-lOmFGT1-96XzFwIzGYqmsnVo)
1.0.1.3 (EU) (https://mega.co.nz/#!x0RA3DwS!YLi3-etQ1Mjka2fo-XsGCcX-XJ05QLvoDfdLMnGIsUY)
1.0.1.4 (EU) (https://mega.co.nz/#!8g4TWZRD!nNsgYEFRmlNcEZ3KAYZLwF6QcPfif_qtzWKv0x2 RyQA) => *Overclock capability*
1.0.1.9 (EU) (https://mega.co.nz/#!R9xGVTyS!r10qxMVQL6atS13PVwglIlRVeWl3m0QrYtNZ5r0 vr3Y) => *Overclock capability*
1.0.1.9 (US) (https://mega.co.nz/#!R95zxAKS!dTrIj7zCqCDC_fFtBV3Qy4oKKALpYd4LxCa_Bze JOCs) => *Overclock capability*
RT-N66R (MIPS)
1.0.1.3 (US) (https://mega.co.nz/#!xpgQzZLQ!QmxvXOiZrFvBN-7oZnb2pnAlIC5GJg8YmrdJ1MUyB5c)
RT-N66W (MIPS)
1.0.1.4 (US) (https://mega.co.nz/#!4hIEQIhR!2XdaITbhvRbv9O8YbBuOnyODeDfom2WyFb_NH64 ikw0)
RT-AC66U (MIPS) - (Known HW Revisions: 1.30, 1.50, 1.60)
1.0.1.0 (US) (https://mega.co.nz/#!UoQggbbD!r1w7qDhQMEVIJhxdXB8Y6tr7RFThLjVNX4yGtPg uadg) => *Dumped from HW Rev. 1.30*
1.0.1.4 (EU) (https://mega.co.nz/#!494wQBZY!0SQ5xA_a2EHEk-GmAxmWIsvd_61XKdZqdI_qLbufiQ8)
1.0.1.4 (US) (https://mega.co.nz/#!Qx5myTJa!G-jnIMHmibNTb6JDJ8_TRUN2J5B-w-0D8jjd3atf-6Y)
1.0.1.7 (US) (https://mega.co.nz/#!lpZCwJqB!R_fuUtNQ_oZpOMBbvCXia1O-i9wdGiVfHYiWblYMu_Y) => *Attention!!
It's the 3rd user reporting a bricked router using this CFE version on HW Rev. 1.30 *NOT COMPATIBLE*,
it works on HW Rev. 1.50, not confirmed if works on HW Rev. 1.60, try it at your own risk*
1.0.1.7 (US_TW) (https://mega.co.nz/#!g4Jl1ChY!OQsq-uiq055bySLIH3aNQtdHhMSfSj_sa849J8SZBMA) => *regulation_domain=TW*
1.0.1.8 (US) (https://mega.co.nz/#!d4QGkSCJ!ryVGFPCIzu0c_ohTD7xFF0T3NULjhAlogb3GbU2 6zY0) => *This version should not work
on HW Rev. 1.30 just like 1.0.1.7 (US), nflash_swecc=1 it's also present on it*
RT-AC66R (MIPS)
1.0.1.4 (US) (https://mega.co.nz/#!V1IlBIrY!e8unIL8T3i517YphCktYzUiOmdh-C3amR2r-YQepUAw)
ARM
=====
RT-N18U (ARM) - (Known HW Revisions: 2.20)
2.0.0.7 (EU) (https://mega.co.nz/#!1sxkQRZB!7TqjwCMcXJO09rEhlSaevFI8icCpYFFtjh35JzF lygg)
2.0.0.7 (US) (https://mega.co.nz/#!dwQhWazS!vbCuIg4CQIGKOUxctEBJD7Ku3YzKsLwwvnqvsDs fxow)
RT-AC56U (ARM) - (Known HW Revisions: 1.60, 2.00, 2.20, 2.30)
1.0.1.9 (US) (https://mega.co.nz/#!NhgzQDbC!Iurlzh8cy4uGI1I_xpQMmCJ-QEiT41CJb7J-fIDJbBk) => DDR3 *unlocked* to 800MHZ
1.0.2.3 (EU) (https://mega.co.nz/#!k45W1RzC!U8suIh8pvl0uRu9lJQ72dR8POZbb0SxLUN3NUED fXAI)
1.0.2.8 (US) (https://mega.co.nz/#!BgIAiI6I!uxrYiz6Me-SwbG1glQ8Kkc_CPXEVhBMF94XvbpmCN10) => DDR3 *unlocked* to 800MHZ
RT-AC56R (ARM)
1.0.2.3 (US) (https://mega.co.nz/#!Q0AV0CbC!N5GWgK3xrEyBl_9TyUip2qQAxrpZ5ZwrUO5T2cu g7FE) => DDR3 *locked* to 666MHZ
RT-AC56S (ARM)
1.0.2.7 (SG) (https://mega.co.nz/#!48pmmTBA!VScLIhzSxEMAGFYYanqiSBdZgIeqiDDdFJMk8X3 qwic)
RT-AC68U (ARM) - (Known HW Revisions: 1.21, 1.60, 1.61, 1.68, 1.70, 1.80)
1.0.1.1 (US) (https://mega.co.nz/#!Y5hylarY!8n6exRkDQelGMwofUene2n8ObBUyq6Px9TCOjik 9D80)
1.0.1.6 (US) (https://mega.co.nz/#!QpZA3YqS!D632GXXf7PE6FTW0DBaAnd4GUrrii4KyLkj9hA_ hCGo) => DDR3 *unlocked* to 800MHZ
1.0.1.6 (EU) (https://mega.co.nz/#!clghDKpK!QmAf3ms0DSUQgEFcXo9MHSMXv-71xkZMG9MyRFWkpdg) => DDR3 *locked* to 666MHZ
1.0.1.7 (EU) (https://mega.co.nz/#!gwZT0Qab!D3HXZtRnH33FO5EilkeIgQ0rKGqekf4O7BVkAYt WdhA) => DDR3 *unlocked* to 800MHZ
1.0.1.8 (EU) (https://mega.co.nz/#!YlJziRgb!zvnOL6HK0Rire9D3POqr8Co2ALUBohKsL_xxMgs vPFc) => DDR3 *unlocked* to 800MHZ
1.0.2.0 (US) (https://mega.co.nz/#!YpBkRKhJ!Rardt8pN-ULyYk9ak_O2X-g-YhPWauuH-tByYIvWYgY) => DDR3 *unlocked* to 800MHZ
RT-AC68U V2 (ARM)
-
RT-AC87U (ARM) - (Known HW Revisions: 1.30, 1.50)
1.0.3.2 (EU) (https://mega.co.nz/#!JtgVgYYC!voS-E09TcGvw093ZINEaqsvLfgg5D0MLES5_aJKZY8Q)
1.0.3.2 (US) (https://mega.co.nz/#!9ooCySJA!MiFC6qWlf5DyJwHUNk-ukeZ3bfHlIoYuzlt_n1xspuQ)
TM-1900AC (ARM)
2.1.2.1 (Q2) (https://mega.co.nz/#!AshGXZjR!a1jPk4YZGTkjalJTpk0sColYU6lhS4qF19OtL6U idjI)
RT-AC3200 (ARM)
-
CFE COUNT: 31 Files
MIRROR SITES:
===========
http://198.23.248.102/CFE/ (Outdated)
http://pc.cd/swu (Outdated)
If anyone has a different CFE version/region from the ones posted here
please dump it and upload it, same about HW revision, please share it.
You can follow CFE dumping procedures on this threads:
http://forums.smallnetbuilder.com/showthread.php?t=8259
http://forums.smallnetbuilder.com/showpost.php?p=124458&postcount=519
RT-AC68U/R (ARM) - DDR/CFE UPDATE TOOL:
DDR/CFE update tool (https://mega.co.nz/#!g0R0CLQR!aoSNJLUzxSUKy1Fb06H6YyHDVGeKRKrcOwR0kha 3UCs)
This tool originally/unmodified will only change your DDR speed from 533 to 666mhz
and upgrade your CFE to 1.0.1.6 version, if the original is older.
It should be used with EXTREME CAUTION specially if you want to FLASH and modify/
customize CFE, the bad use of this tool with modifications can result in a BRICKED router.
NVSIMPLE (ARM):
nvsimple (ARM) (https://mega.co.nz/#!FsQGkAgJ!t4oa2SDWxOp2hy7v4k96YnsAP4LIWmo2rOsYcCF VoVM)
MTD-WRITE (ARM):
MTD-WRITE (ARM) V1 (https://mega.co.nz/#!Il4kWYwB!v8YkL4j_3fcgl1msyCwvD6_dQfRQ08qR9epVVKo i7TM) => *Original version (V1) from ASUS*
MTD-WRITE (ARM) V2 (https://mega.co.nz/#!o1xX2Z5Q!pGw1Vl0j6qS9kYhbOtpvsgbKf-VIRfWRw61HhmIqRDM) => *New version (V2), it fix CFE
updates on some specific situations that couldn't complete
the process and no update was done on previous version*
AIO FILE:
AIO File (https://mega.co.nz/#!F9wBnIrD!MoBfznAN2yRORSdJg2kGsNvI6SgEhNg6fP3O6yW dChY)
CFE UPDATE COMMAND:
==================
MIPS:
mtd-write -i new_cfe.bin -d pmon
mtd-write (MIPS) file it's part of the FW already.
http://forums.smallnetbuilder.com/showthread.php?t=8259
ARM:
mtd-write new_cfe.bin boot(V1)
and
(V2)
mtd-write -i new_cfe.bin -d boot
mtd-write (ARM) needs to be copied to the USB drive or downloaded (wget on /tmp or USB) so you can use it.
WARNING: DO IT AT YOUR OWN RISK!
BE AWARE, IF SOMETHING GOES WRONG WITH CFE UPDATE YOU WILL BRICK YOUR ROUTER AND THE ONLY WAY
TO RECOVER IT IS VIA JTAG, IF DEVICE IS ALREADY SUPPORTED OR UNSOLDERING AND PROGRAMMING THE CHIP.
CFE / BOOTLOADER IS A CRITICAL PART OF THE SYSTEM THAT SHOULD NOT BE TOUCHED, ONLY FOR THOSE
WHO REALLY KNOW WHAT THEY ARE DOING AND AWARE OF THE CONSEQUENCES THAT CAN RESULT FROM IT.
Thank you.
UPD: RT-AC68U @1600MHZ
admin@proxy:/tmp/home/root# nvram get clkfreq
1600,800
This is CPU and memory benchmark for OpenWRT v0.6.
Overhead for getting time: 1us
Time to run memory bench: 1.19[secs]
Time to run computation of pi (2400 digits, 10 times): 3.29[secs]
Time to run computation of e (9009 digits): 2.83[secs]
Time to run float bench: 0.03[secs]
Total time: 7.3s
________________
JOIN US: RMerlin ASUS FW on IRC via Web Client: http://www.dal.net:9090
IRC Channel: #asuswrt
================================
I'm creating this thread just because it would be interesting testing old vs recent CFE versions on devices
in order to see the real differences, it's well know that some CFE versions don't allow some settings.
Ex: New CFE's don't allow setting RT-AC68U at 800MHZ DDR3 speed and older versions allow it,
wireless channels region unlocking, etc.
NOTE: Different CFE and HW Revision version can have impact on OC capability.
Check your CFE version at:
http://192.168.1.1/Tools_Sysinfo.asp
Or via Telnet/SSH:
nvram get bl_version
http://forums.smallnetbuilder.com/showthread.php?t=17793
MIPS
=====
RT-N66U B1 (MIPS) - (Known HW Revisions: 3.00, 3.20)
1.0.1.1 (US) (https://mega.co.nz/#!55hAkaQI!EDuz-zE5vM-gRHQLSeXo1OnhUzMPQ8tjBXygBWVnyNQ)
1.0.1.2 (EU) (https://mega.co.nz/#!JtAAgTJD!Qq3YnYfF-GBaLbMFNr-lOmFGT1-96XzFwIzGYqmsnVo)
1.0.1.3 (EU) (https://mega.co.nz/#!x0RA3DwS!YLi3-etQ1Mjka2fo-XsGCcX-XJ05QLvoDfdLMnGIsUY)
1.0.1.4 (EU) (https://mega.co.nz/#!8g4TWZRD!nNsgYEFRmlNcEZ3KAYZLwF6QcPfif_qtzWKv0x2 RyQA) => *Overclock capability*
1.0.1.9 (EU) (https://mega.co.nz/#!R9xGVTyS!r10qxMVQL6atS13PVwglIlRVeWl3m0QrYtNZ5r0 vr3Y) => *Overclock capability*
1.0.1.9 (US) (https://mega.co.nz/#!R95zxAKS!dTrIj7zCqCDC_fFtBV3Qy4oKKALpYd4LxCa_Bze JOCs) => *Overclock capability*
RT-N66R (MIPS)
1.0.1.3 (US) (https://mega.co.nz/#!xpgQzZLQ!QmxvXOiZrFvBN-7oZnb2pnAlIC5GJg8YmrdJ1MUyB5c)
RT-N66W (MIPS)
1.0.1.4 (US) (https://mega.co.nz/#!4hIEQIhR!2XdaITbhvRbv9O8YbBuOnyODeDfom2WyFb_NH64 ikw0)
RT-AC66U (MIPS) - (Known HW Revisions: 1.30, 1.50, 1.60)
1.0.1.0 (US) (https://mega.co.nz/#!UoQggbbD!r1w7qDhQMEVIJhxdXB8Y6tr7RFThLjVNX4yGtPg uadg) => *Dumped from HW Rev. 1.30*
1.0.1.4 (EU) (https://mega.co.nz/#!494wQBZY!0SQ5xA_a2EHEk-GmAxmWIsvd_61XKdZqdI_qLbufiQ8)
1.0.1.4 (US) (https://mega.co.nz/#!Qx5myTJa!G-jnIMHmibNTb6JDJ8_TRUN2J5B-w-0D8jjd3atf-6Y)
1.0.1.7 (US) (https://mega.co.nz/#!lpZCwJqB!R_fuUtNQ_oZpOMBbvCXia1O-i9wdGiVfHYiWblYMu_Y) => *Attention!!
It's the 3rd user reporting a bricked router using this CFE version on HW Rev. 1.30 *NOT COMPATIBLE*,
it works on HW Rev. 1.50, not confirmed if works on HW Rev. 1.60, try it at your own risk*
1.0.1.7 (US_TW) (https://mega.co.nz/#!g4Jl1ChY!OQsq-uiq055bySLIH3aNQtdHhMSfSj_sa849J8SZBMA) => *regulation_domain=TW*
1.0.1.8 (US) (https://mega.co.nz/#!d4QGkSCJ!ryVGFPCIzu0c_ohTD7xFF0T3NULjhAlogb3GbU2 6zY0) => *This version should not work
on HW Rev. 1.30 just like 1.0.1.7 (US), nflash_swecc=1 it's also present on it*
RT-AC66R (MIPS)
1.0.1.4 (US) (https://mega.co.nz/#!V1IlBIrY!e8unIL8T3i517YphCktYzUiOmdh-C3amR2r-YQepUAw)
ARM
=====
RT-N18U (ARM) - (Known HW Revisions: 2.20)
2.0.0.7 (EU) (https://mega.co.nz/#!1sxkQRZB!7TqjwCMcXJO09rEhlSaevFI8icCpYFFtjh35JzF lygg)
2.0.0.7 (US) (https://mega.co.nz/#!dwQhWazS!vbCuIg4CQIGKOUxctEBJD7Ku3YzKsLwwvnqvsDs fxow)
RT-AC56U (ARM) - (Known HW Revisions: 1.60, 2.00, 2.20, 2.30)
1.0.1.9 (US) (https://mega.co.nz/#!NhgzQDbC!Iurlzh8cy4uGI1I_xpQMmCJ-QEiT41CJb7J-fIDJbBk) => DDR3 *unlocked* to 800MHZ
1.0.2.3 (EU) (https://mega.co.nz/#!k45W1RzC!U8suIh8pvl0uRu9lJQ72dR8POZbb0SxLUN3NUED fXAI)
1.0.2.8 (US) (https://mega.co.nz/#!BgIAiI6I!uxrYiz6Me-SwbG1glQ8Kkc_CPXEVhBMF94XvbpmCN10) => DDR3 *unlocked* to 800MHZ
RT-AC56R (ARM)
1.0.2.3 (US) (https://mega.co.nz/#!Q0AV0CbC!N5GWgK3xrEyBl_9TyUip2qQAxrpZ5ZwrUO5T2cu g7FE) => DDR3 *locked* to 666MHZ
RT-AC56S (ARM)
1.0.2.7 (SG) (https://mega.co.nz/#!48pmmTBA!VScLIhzSxEMAGFYYanqiSBdZgIeqiDDdFJMk8X3 qwic)
RT-AC68U (ARM) - (Known HW Revisions: 1.21, 1.60, 1.61, 1.68, 1.70, 1.80)
1.0.1.1 (US) (https://mega.co.nz/#!Y5hylarY!8n6exRkDQelGMwofUene2n8ObBUyq6Px9TCOjik 9D80)
1.0.1.6 (US) (https://mega.co.nz/#!QpZA3YqS!D632GXXf7PE6FTW0DBaAnd4GUrrii4KyLkj9hA_ hCGo) => DDR3 *unlocked* to 800MHZ
1.0.1.6 (EU) (https://mega.co.nz/#!clghDKpK!QmAf3ms0DSUQgEFcXo9MHSMXv-71xkZMG9MyRFWkpdg) => DDR3 *locked* to 666MHZ
1.0.1.7 (EU) (https://mega.co.nz/#!gwZT0Qab!D3HXZtRnH33FO5EilkeIgQ0rKGqekf4O7BVkAYt WdhA) => DDR3 *unlocked* to 800MHZ
1.0.1.8 (EU) (https://mega.co.nz/#!YlJziRgb!zvnOL6HK0Rire9D3POqr8Co2ALUBohKsL_xxMgs vPFc) => DDR3 *unlocked* to 800MHZ
1.0.2.0 (US) (https://mega.co.nz/#!YpBkRKhJ!Rardt8pN-ULyYk9ak_O2X-g-YhPWauuH-tByYIvWYgY) => DDR3 *unlocked* to 800MHZ
RT-AC68U V2 (ARM)
-
RT-AC87U (ARM) - (Known HW Revisions: 1.30, 1.50)
1.0.3.2 (EU) (https://mega.co.nz/#!JtgVgYYC!voS-E09TcGvw093ZINEaqsvLfgg5D0MLES5_aJKZY8Q)
1.0.3.2 (US) (https://mega.co.nz/#!9ooCySJA!MiFC6qWlf5DyJwHUNk-ukeZ3bfHlIoYuzlt_n1xspuQ)
TM-1900AC (ARM)
2.1.2.1 (Q2) (https://mega.co.nz/#!AshGXZjR!a1jPk4YZGTkjalJTpk0sColYU6lhS4qF19OtL6U idjI)
RT-AC3200 (ARM)
-
CFE COUNT: 31 Files
MIRROR SITES:
===========
http://198.23.248.102/CFE/ (Outdated)
http://pc.cd/swu (Outdated)
If anyone has a different CFE version/region from the ones posted here
please dump it and upload it, same about HW revision, please share it.
You can follow CFE dumping procedures on this threads:
http://forums.smallnetbuilder.com/showthread.php?t=8259
http://forums.smallnetbuilder.com/showpost.php?p=124458&postcount=519
RT-AC68U/R (ARM) - DDR/CFE UPDATE TOOL:
DDR/CFE update tool (https://mega.co.nz/#!g0R0CLQR!aoSNJLUzxSUKy1Fb06H6YyHDVGeKRKrcOwR0kha 3UCs)
This tool originally/unmodified will only change your DDR speed from 533 to 666mhz
and upgrade your CFE to 1.0.1.6 version, if the original is older.
It should be used with EXTREME CAUTION specially if you want to FLASH and modify/
customize CFE, the bad use of this tool with modifications can result in a BRICKED router.
NVSIMPLE (ARM):
nvsimple (ARM) (https://mega.co.nz/#!FsQGkAgJ!t4oa2SDWxOp2hy7v4k96YnsAP4LIWmo2rOsYcCF VoVM)
MTD-WRITE (ARM):
MTD-WRITE (ARM) V1 (https://mega.co.nz/#!Il4kWYwB!v8YkL4j_3fcgl1msyCwvD6_dQfRQ08qR9epVVKo i7TM) => *Original version (V1) from ASUS*
MTD-WRITE (ARM) V2 (https://mega.co.nz/#!o1xX2Z5Q!pGw1Vl0j6qS9kYhbOtpvsgbKf-VIRfWRw61HhmIqRDM) => *New version (V2), it fix CFE
updates on some specific situations that couldn't complete
the process and no update was done on previous version*
AIO FILE:
AIO File (https://mega.co.nz/#!F9wBnIrD!MoBfznAN2yRORSdJg2kGsNvI6SgEhNg6fP3O6yW dChY)
CFE UPDATE COMMAND:
==================
MIPS:
mtd-write -i new_cfe.bin -d pmon
mtd-write (MIPS) file it's part of the FW already.
http://forums.smallnetbuilder.com/showthread.php?t=8259
ARM:
mtd-write new_cfe.bin boot(V1)
and
(V2)
mtd-write -i new_cfe.bin -d boot
mtd-write (ARM) needs to be copied to the USB drive or downloaded (wget on /tmp or USB) so you can use it.
WARNING: DO IT AT YOUR OWN RISK!
BE AWARE, IF SOMETHING GOES WRONG WITH CFE UPDATE YOU WILL BRICK YOUR ROUTER AND THE ONLY WAY
TO RECOVER IT IS VIA JTAG, IF DEVICE IS ALREADY SUPPORTED OR UNSOLDERING AND PROGRAMMING THE CHIP.
CFE / BOOTLOADER IS A CRITICAL PART OF THE SYSTEM THAT SHOULD NOT BE TOUCHED, ONLY FOR THOSE
WHO REALLY KNOW WHAT THEY ARE DOING AND AWARE OF THE CONSEQUENCES THAT CAN RESULT FROM IT.
Thank you.
UPD: RT-AC68U @1600MHZ
admin@proxy:/tmp/home/root# nvram get clkfreq
1600,800
This is CPU and memory benchmark for OpenWRT v0.6.
Overhead for getting time: 1us
Time to run memory bench: 1.19[secs]
Time to run computation of pi (2400 digits, 10 times): 3.29[secs]
Time to run computation of e (9009 digits): 2.83[secs]
Time to run float bench: 0.03[secs]
Total time: 7.3s
________________
JOIN US: RMerlin ASUS FW on IRC via Web Client: http://www.dal.net:9090
IRC Channel: #asuswrt