jaapjeuk
10-08-2005, 11:54
hi, there.
i'm using a wl-500g, usb-disk, firmware 1.9.2.7-4, everthing is working OK. :)
But when i install
"http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/openssl_0.9.7d-4_mipsel.ipk"
then my WLAN(eth2) is not working anymore, so there is no connection to my Wlan-pc anymore :confused:
I noticed that my SSID is empty then, command "wl assoc" results in:
SSID: ""
Mode: Ad Hoc RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:00:00:00:00:00 Capability: IBSS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
nvram values of wl0_ssid and wl_ssid are still correct!
When i remove the openssl.ipkg and reboot my router, the problem is gone!
wl assoc
SSID: "myrouter"
Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:11:22:33:44:55:66 Capability: ESS WEP ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
I added the line: "wl ssid myrouter" into the post-firewall script, that works of course, but doesn't fix my problem. Does someone have a suggestion how to resolve this ?
i'm using a wl-500g, usb-disk, firmware 1.9.2.7-4, everthing is working OK. :)
But when i install
"http://ipkg.nslu2-linux.org/feeds/unslung/wl500g/openssl_0.9.7d-4_mipsel.ipk"
then my WLAN(eth2) is not working anymore, so there is no connection to my Wlan-pc anymore :confused:
I noticed that my SSID is empty then, command "wl assoc" results in:
SSID: ""
Mode: Ad Hoc RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:00:00:00:00:00 Capability: IBSS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
nvram values of wl0_ssid and wl_ssid are still correct!
When i remove the openssl.ipkg and reboot my router, the problem is gone!
wl assoc
SSID: "myrouter"
Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 1
BSSID: 00:11:22:33:44:55:66 Capability: ESS WEP ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
I added the line: "wl ssid myrouter" into the post-firewall script, that works of course, but doesn't fix my problem. Does someone have a suggestion how to resolve this ?