problem writing on USB disk.

[beci]

Hi, I tried to use samba with USB bar. But there must be some problem somewhere. After I write on USB - the device is turned into read-only mode. Any hints?
USB disk works fine with my notebook.
Thanks


kernel: FAT: bogus logical sector size 13056
kernel: NTFS: Unable to set blocksize 512.

kernel: MSDOS FS: Using codepage 950
kernel: MSDOS FS: IO charset cp950
USB storage: vfat fs mounted to /tmp/harddisk
kernel: I/O error: dev 08:01, sector 2018
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: I/O error: dev 08:01, sector 2019
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: I/O error: dev 08:01, sector 1
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: I/O error: dev 08:01, sector 34
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: Directory sread (sector 0x7e2) failed
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: I/O error: dev 08:01, sector 2018
kernel: Directory sread (sector 0x7e2) failed

kernel: bread in fat_access failed
kernel: Filesystem panic (dev 08:01).
kernel: fat_free: deleting beyond EOF
kernel: File system has been set read-only
kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
kernel: I/O error: dev 08:01, sector 2016

[beci]

No ideas?
Thanks,
Beci

[oleo]

I've had similar problems with several IDE disk and USB disk cases. Now I can tell that Revoltec USB case and 320GB WD works well under heavy load. Tried 10GB, 45GB and 200GB disks.

Good WD disk:
Vendor: WDC WD32 Model: 00JB-00KFA0 Rev: 0 0