lebowski
27-07-2005, 08:44
Anyone know how to setup up the WL-500G Deluxe so that I can log on to my computer from the Internet.
So it would look like this
Computer somewhere elese ---> Internet ---> My WL500G ---> My PC behind Router
Sure...."Virtual Servers" in the webinterface.
Forward the appropiate ports to the internal ip of your choice.
lebowski
27-07-2005, 08:54
Sure...."Virtual Servers" in the webinterface.
Forward the appropiate ports to the internal ip of your choice.
can't get that to work here's what I found on the site of RemotlyAnywhere
ROUTER: External IP address: 111.111.111.111
RemotelyAnywhere machine: IP address: 192.168.0.10, Port: 2000 (port 2000 is the default but this can also be changed)
STEP 1) Map a port from the router to the computer. In this case, you could pick a port on the router (say, 5200) and map it to 192.168.0.10:2000.
Mapping ports from routers to computers is router-specific. Usually your router will have a web-based interface that allows you to configure and maintain it. Sometimes router companies refer to this action as 'Port Forwarding', Port Mapping', 'Opening a Pinhole', and 'Port Range Forwarding.'
STEP 2) Having done the above, you will now be able to fully access the RemotelyAnywhere computer with the URL http://111.111.111.111:5200 or https://111.111.111.111:5200 - that is, the router's external IP and the port you mapped to the RemotelyAnywhere machine.
The problem is when entering the IP under LOCAL IP can't put in the :2000
Anymore help would be great :)
Antiloop
27-07-2005, 09:42
read this thread: 333
or read manual