wastel
27-06-2005, 22:37
Hello,
I have already used some versions of Olegs firmware during the last months and have been quite satisfied with all features. The only thing that does not work correctly with my configuration is, that "Idel disconnect" does not work. I have already searched the forum. Others told about similar problems. But I could not find a posting, explicitly stating that the feature should definitly work or not.
My current firmware version: 1.9.2.7-6a.3
My wan settings: Disconnect Time = 30, "Tx only" = true
[wastel@wl500g root]$ nvram show|grep wan0|sort
size: 9521 bytes (23247 left)
wan0_desc=Default Connection
wan0_dns1_x=
wan0_dns2_x=
wan0_dns=217.237.150.33 217.237.151.161
wan0_dns_t=
wan0_dnsenable_x=1
wan0_domain=
wan0_etherspeed_x=auto
wan0_gateway=217.0.116.46
wan0_gateway_t=
wan0_heartbeat_x=
wan0_hostname=
wan0_hwaddr=00:11:D8:70:11:71
wan0_hwaddr_x=
wan0_hwname=
wan0_ifname=eth1
wan0_ifnames=eth1
wan0_ipaddr=84.169.20.157
wan0_ipaddr_t=
wan0_lease=86400
wan0_mode_x=2
wan0_nat_x=1
wan0_netmask=255.255.255.255
wan0_netmask_t=
wan0_pppoe_ac=
wan0_pppoe_demand=0
wan0_pppoe_gateway=
wan0_pppoe_idletime=30
wan0_pppoe_ifname=ppp0
wan0_pppoe_ipaddr=
wan0_pppoe_keepalive=0
wan0_pppoe_mru=1492
wan0_pppoe_mtu=1492
wan0_pppoe_netmask=
wan0_pppoe_options_x=
wan0_pppoe_passwd=xxxxxx
wan0_pppoe_relay_x=0
wan0_pppoe_service=
wan0_pppoe_txonly_x=1
wan0_pppoe_username=xxxxxx
wan0_primary=1
wan0_proto=pppoe
wan0_route_x=IP_Routed
wan0_status_t=Disconnected
wan0_unit=0
I would be glad if someone could tell me, that this feature works with his configuration and firmware version. If so, what is wrong with my config? Or the other way round: Is this a known bug?
I have already used some versions of Olegs firmware during the last months and have been quite satisfied with all features. The only thing that does not work correctly with my configuration is, that "Idel disconnect" does not work. I have already searched the forum. Others told about similar problems. But I could not find a posting, explicitly stating that the feature should definitly work or not.
My current firmware version: 1.9.2.7-6a.3
My wan settings: Disconnect Time = 30, "Tx only" = true
[wastel@wl500g root]$ nvram show|grep wan0|sort
size: 9521 bytes (23247 left)
wan0_desc=Default Connection
wan0_dns1_x=
wan0_dns2_x=
wan0_dns=217.237.150.33 217.237.151.161
wan0_dns_t=
wan0_dnsenable_x=1
wan0_domain=
wan0_etherspeed_x=auto
wan0_gateway=217.0.116.46
wan0_gateway_t=
wan0_heartbeat_x=
wan0_hostname=
wan0_hwaddr=00:11:D8:70:11:71
wan0_hwaddr_x=
wan0_hwname=
wan0_ifname=eth1
wan0_ifnames=eth1
wan0_ipaddr=84.169.20.157
wan0_ipaddr_t=
wan0_lease=86400
wan0_mode_x=2
wan0_nat_x=1
wan0_netmask=255.255.255.255
wan0_netmask_t=
wan0_pppoe_ac=
wan0_pppoe_demand=0
wan0_pppoe_gateway=
wan0_pppoe_idletime=30
wan0_pppoe_ifname=ppp0
wan0_pppoe_ipaddr=
wan0_pppoe_keepalive=0
wan0_pppoe_mru=1492
wan0_pppoe_mtu=1492
wan0_pppoe_netmask=
wan0_pppoe_options_x=
wan0_pppoe_passwd=xxxxxx
wan0_pppoe_relay_x=0
wan0_pppoe_service=
wan0_pppoe_txonly_x=1
wan0_pppoe_username=xxxxxx
wan0_primary=1
wan0_proto=pppoe
wan0_route_x=IP_Routed
wan0_status_t=Disconnected
wan0_unit=0
I would be glad if someone could tell me, that this feature works with his configuration and firmware version. If so, what is wrong with my config? Or the other way round: Is this a known bug?