How to telnet

[Softy]

hi guys,

It is a very simple thing but i dont know why i am not able to do this. I have Asus router WL 500G. I am trying to get access by using telnet, but connection is refusing.

command: telnet [ipaddress]
connection refusal

please, tell me do i need to configure any thing in router to accept telnet or what.

thanks in advance

[mao44]

Whick firmware dou you have ?
with OLEG Firmware
If you are on your LAN, the IP address is by default 192.168.1.1

[macsat]

There is no telnet server running on the stock ASUS firmware.

You have to run Olegs firmware in order to use telnet.

[Softy]

my ip adress is 10.10.10.10 (i adjusted according to my subnet requirnment)
firmware version is 1.8.1.9

[Styno]

my ip adress is 10.10.10.10 (i adjusted according to my subnet requirnment)
firmware version is 1.8.1.9
Change firmware to 1.9.2.7 CR5 (non-official firmware). It has telnet by default enable for LAN connections.

You can find it in the Firmware section.