Share internet to phone using bluetooth?

[skylin3d]

I would like to share my internet connection from my Asus to my Sony Ericsson w880i phone using a usb Bluetooth dongle. I am now using my internet connection through bluetooth from my computer but I would like to be able to surf without having the pc on, and I'm quite sure it should be possible with the WL-500gP.

I have tried this which I think should work, but it doesn't: http://wl500g.info/showthread.php?t=12762
I had to change some things as I am using the "Headstart II" by raas in the tutorials section, which has a bit different structure. I used /opt/etc/bluez instead of /tmp/harddisk/bluez, hope that is right.
But it just results in:

[admin@asus bluez]$ ./start-bluez
Segmentation fault
cannot remove `/opt/var/run/dbus/pid': No such file or directory
Segmentation fault
Segmentation fault
Segmentation fault
./start-bluez: ./start-bluez: 14: sdpd: not found
./start-bluez: ./start-bluez: 15: pand: not found

The start-bluez file looks like this:

#!/bin/sh

insmod /opt/etc/bluez/module/bluez.o
insmod /opt/etc/bluez/module/hci_usb.o
insmod /opt/etc/bluez/module/l2cap.o
insmod /opt/etc/bluez/module/rfcomm.o
insmod /opt/etc/bluez/module/bnep.o
insmod /opt/etc/bluez/module/sco.o

rm /opt/var/run/dbus/pid
dbus-daemon --system
hcid
hciconfig hci0 up piscan
sdpd
pand --listen --master --role NAP --devup /opt/etc/bluez/dev-up

I have also looked at this page which has the solution for debian etch: http://www.howtoforge.com/bluetooth_pand_debian_etch
But I can't install the "bluetooth" package in the very beginning, and maybe it wouldn't work anyway.

Here is also some (quite old) bluetooth-info: http://wl500g.info/showthread.php?t=5148

And here is also some general info: http://www.stolk.org/debian/bluetooth.html


So can someone help me, how do I get bluez working and what else is needed to share the internet through bluetooth PAN?

[skylin3d]

Could someone help? Just some "general linux bluetooth tricks/advices" could help me a lot...

[Khurram]

Have you seen this post (http://wl500g.info/showthread.php?t=5148)? Its a bit old but it discusses bluetooth connectivity in some detail. Maybe the problems they are having were resolved in r1222 version.