Mateluta
16-02-2010, 18:57
Witam, od paru dni męczę się z przygotowaniem dysku pod router (mam Oleg software)...Skorzystalem ze strony http://rafal.drezek.info/2009/03/21/wl-500gp-przygotowanie-dysku-usb/ i nic nei idzie...Ktos moze mi pomóc krok po kroku? Np jak daję komendę fdisk /dev/discs/disc0/disc wyświetla mis ie takie coś:
The number of cylinders for this disk is set to 1089.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
Potem cokolwiek wpisze - nic nei dziala...BARDZO prosiłbym o dokladna instrukcje jak to zrobic (2 partycje, w tym jedna SWAP)...Dzięki
The number of cylinders for this disk is set to 1089.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help):
Potem cokolwiek wpisze - nic nei dziala...BARDZO prosiłbym o dokladna instrukcje jak to zrobic (2 partycje, w tym jedna SWAP)...Dzięki