Problem flashing with custom Firmware

[eggy]

Cant even get started installing the firmware!!!
I have copied the files over & now on step 5-10



5) open the "backdoor" webpage in your browser: http://192.168.1.220/Main_AdmStatus_Content.asp (username=admin, password=admin)
6) copy the following command to the "System Command" textbox and then click the "Refresh" button:
chmod a+x /tmp/harddisk/part1/tmp/busybox
7) copy the following command to the "System Command" textbox and then click the "Refresh" button:
chmod a+x /tmp/harddisk/part1/tmp/telnetd
8) copy the following command to the "System Command" textbox and then click the "Refresh" button:
ln -s /tmp/harddisk/part1/tmp/busybox /tmp/harddisk/part1/tmp/sh
9) copy the following command to the "System Command" textbox and then click the "Refresh" button:
/tmp/harddisk/part1/tmp/telnetd -d -l /tmp/harddisk/part1/tmp/sh
10) the previous command started the telnet daemon and now you can access it from your PC with: telnet 192.168.1.220

When ever I put the text in & click Refresh, I go to a The page cannot be displayed error page....

Any Ideas whats wrong here???

[fleppuhstein]

Are you sure you have extracted de files to /tmp in part1, not /tmp/tmp ?
Are you typing the command or copy paste ?

[eggy]

Are you sure you have extracted de files to /tmp in part1, not /tmp/tmp ?
Are you typing the command or copy paste ?

Hi,
Yes they are in /tmp & i have copied & pasted the command.
My HDD started clicking last night, so I think it may be knackered.
Gonna try another HDD


EDIT - Just swapped the HDD & Now I am able to complete the steps :o :D