wl500 & zte mf636 usb modem

[air]

Hallo!
Zuerst ein Kompliment an euer Forum, man scheint ja hier sehr schnell Hilfe zu bekommen! Echt super!

Bin neu hier, aber habe mir in den letzten beiden Tagen so ziemlich alle Threads zum Thema wl500 und usb umts modems durchgelesen. Bin meiner Meinung nach ein halbwegs erfahrener User, aber jetzt das erste Mal mit Linux in Kontakt gekommen.

Von mir verwendete Hard&Software:
-Asus WL-500G Premium v2
-Firmware: WL500gpV2-1.9.2.7-10-USB-1.71.trx
-ZTE MF636 (UMTS/HSDPA USB STICK vom Provider 3) am unteren USB Port
-zweiter USB Port frei

Das Firmware Update klappte dank der ausführlichen Anfänger Threads ohne Probleme.
Ich glaube das Problem liegt darin, dass der Stick einen Slot für SD-Karten hat (welcher leer ist). Der Stick wird als erstes als USB storage device erkannt. Auch unter Windows wird der Stick erst als 3G Modem erkannt, nachdem er vom 3 DataManager ausgeworfen wird und neu initialisiert wird.
Die Vid/Pid sind meines Wissens nach bei den beiden Modi unterschiedlich:
Von Router angezeigt: 0x19d2/0x2000 für strage device
3G Modem: sollte 0x19d2/0x031 sein?

Meine Frage:
Kann ich unter Linux ein Script oder ähnliches (vl. wie beim Huawei E220 Thread) schreiben, um den Stick auszuwerfen und neu im Modem mode zu initialisieren??? (Reboot des Routers oder mehrmaliges aus/anstecken des Sticks hat nichts gebracht)

Oder kann man beim ZTE MF636 vl durch FW Update den storage mode deaktivieren???
Google konnte mir leider nicht helfen ;) !

[air]

System Log:
Jan 1 01:00:04 syslogd started: BusyBox v1.1.3
Jan 1 01:00:04 kernel: klogd started: BusyBox v1.1.3 (2008.04.25-08:17+0000)
Jan 1 01:00:04 kernel: CPU revision is: 00029029
Jan 1 01:00:04 kernel: Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Jan 1 01:00:04 kernel: Primary data cache 16kb, linesize 16 bytes (2 ways)
Jan 1 01:00:04 kernel: Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #109 Fri Oct 17 09:11:33 CEST 2008
Jan 1 01:00:04 kernel: Setting the PFC to its default value
Jan 1 01:00:04 kernel: Determined physical RAM map:
Jan 1 01:00:04 kernel: memory: 02000000 @ 00000000 (usable)
Jan 1 01:00:04 kernel: On node 0 totalpages: 8192
Jan 1 01:00:04 kernel: zone(0): 8192 pages.
Jan 1 01:00:04 kernel: zone(1): 0 pages.
Jan 1 01:00:04 kernel: zone(2): 0 pages.
Jan 1 01:00:04 kernel: Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200
Jan 1 01:00:04 kernel: CPU: BCM5354 rev 2 pkg 0 at 240 MHz
Jan 1 01:00:04 kernel: Calibrating delay loop... 237.56 BogoMIPS
Jan 1 01:00:04 kernel: Memory: 30256k/32768k available (1713k kernel code, 2512k reserved, 132k data, 68k init, 0k highmem)
Jan 1 01:00:04 kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Jan 1 01:00:04 kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Jan 1 01:00:04 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 1 01:00:04 kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 1 01:00:04 kernel: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:04 kernel: Checking for 'wait' instruction... unavailable.
Jan 1 01:00:04 kernel: POSIX conformance testing by UNIFIX
Jan 1 01:00:04 kernel: PCI: no core
Jan 1 01:00:04 kernel: PCI: Fixing up bus 0
Jan 1 01:00:04 kernel: Linux NET4.0 for Linux 2.4
Jan 1 01:00:04 kernel: Based upon Swansea University Computer Society NET3.039
Jan 1 01:00:04 kernel: Initializing RT netlink socket
Jan 1 01:00:04 kernel: Starting kswapd
Jan 1 01:00:04 kernel: Journalled Block Device driver loaded
Jan 1 01:00:04 kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Jan 1 01:00:04 kernel: devfs: boot_options: 0x1
Jan 1 01:00:04 kernel: NTFS driver v1.1.22 [Flags: R/O]
Jan 1 01:00:04 kernel: pty: 256 Unix98 ptys configured
Jan 1 01:00:04 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Jan 1 01:00:04 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
Jan 1 01:00:04 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
Jan 1 01:00:04 kernel: HDLC line discipline: version $Revision$, maxframe=4096
Jan 1 01:00:04 kernel: N_HDLC line discipline registered.
Jan 1 01:00:04 kernel: loop: loaded (max 8 devices)
Jan 1 01:00:04 kernel: PPP generic driver version 2.4.2
Jan 1 01:00:04 kernel: PPP Deflate Compression module registered
Jan 1 01:00:04 kernel: PPP BSD Compression module registered
Jan 1 01:00:04 kernel: MPPE/MPPC encryption/compression module registered
Jan 1 01:00:04 kernel: PPPoL2TP kernel driver, V0.13 (oleg@cs.msu.su)
Jan 1 01:00:04 kernel: Amd/Fujitsu Extended Query Table v1.1 at 0x0040
Jan 1 01:00:04 kernel: Flash Id: Vendor: 0x00c2 Device: 0x00cb
Jan 1 01:00:04 kernel: number of CFI chips: 1
Jan 1 01:00:04 kernel: Flash device: 0x800000 at 0x1c000000
Jan 1 01:00:04 kernel: Physically mapped flash: squashfs filesystem found at block 739
Jan 1 01:00:04 kernel: Creating 5 MTD partitions on "Physically mapped flash":
Jan 1 01:00:04 kernel: 0x00000000-0x00020000 : "boot"
Jan 1 01:00:04 kernel: 0x00020000-0x007f0000 : "linux"
Jan 1 01:00:04 kernel: 0x000b8f50-0x007f0000 : "rootfs"
Jan 1 01:00:04 kernel: 0x007f0000-0x00800000 : "nvram"
Jan 1 01:00:04 kernel: 0x003c0000-0x007f0000 : "flashfs"
Jan 1 01:00:04 kernel: sflash: found no supported devices
Jan 1 01:00:04 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 01:00:04 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Jan 1 01:00:04 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 01:00:04 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 01:00:04 kernel: Linux IP multicast router 0.06 plus PIM-SM
Jan 1 01:00:04 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
Jan 1 01:00:04 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 01:00:04 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 01:00:04 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 01:00:04 kernel: ipt_time loading
Jan 1 01:00:04 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 01:00:04 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 01:00:04 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:04 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:04 kernel: FAT: bogus logical sector size 36096
Jan 1 01:00:04 kernel: FAT: bogus logical sector size 36096
Jan 1 01:00:04 kernel: NTFS: Unable to set blocksize 512.
Jan 1 01:00:04 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:04 kernel: Mounted devfs on /dev
Jan 1 01:00:04 kernel: Freeing unused kernel memory: 68k freed
Jan 1 01:00:04 kernel: Executing /linuxrc
Jan 1 01:00:04 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:04 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan 1 01:00:04 kernel: eth1: Broadcom BCM4318 802.11 Wireless Controller 4.150.10.29
Jan 1 01:00:04 kernel: device eth0 entered promiscuous mode
Jan 1 01:00:04 kernel: device vlan0 entered promiscuous mode
Jan 1 01:00:04 kernel: device eth1 entered promiscuous mode
Jan 1 01:00:04 kernel: ort 2(eth1) entering listening state
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering listening state
Jan 1 01:00:04 kernel: br0: port 2(eth1) entering learning state
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering learning state
Jan 1 01:00:04 kernel: br0: port 2(eth1) entering forwarding state
Jan 1 01:00:04 kernel: br0: topology change detected, propagating
Jan 1 01:00:04 kernel: br0: port 1(vlan0) entering forwarding state
Jan 1 01:00:04 kernel: br0: topology change detected, propagating
Jan 1 01:00:04 dnsmasq[74]: started, version 2.22 cachesize 150
Jan 1 01:00:04 dnsmasq[74]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, lease time 24h
Jan 1 01:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 01:00:04 kernel: usb.c: registered new driver hub
Jan 1 01:00:04 dnsmasq[74]: DHCP, /tmp/dnsmasq.log will be written every 8h
Jan 1 01:00:04 dnsmasq[74]: read /etc/hosts - 5 addresses
Jan 1 01:00:04 dnsmasq[74]: reading /tmp/resolv.conf
Jan 1 01:00:04 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan 1 01:00:04 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan 1 01:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:04 kernel: Product: USB OHCI Root Hub
Jan 1 01:00:04 kernel: SerialNumber: b8003000
Jan 1 01:00:04 kernel: hub.c: USB hub found
Jan 1 01:00:04 kernel: hub.c: 2 ports detected
Jan 1 01:00:05 kernel: hub.c: new USB device 00:03.0-1, assigned address 2
Jan 1 01:00:05 kernel: hub.c: USB hub found
Jan 1 01:00:05 kernel: hub.c: 2 ports detected
Jan 1 01:00:05 kernel: hub.c: new USB device 00:03.0-1.1, assigned address 3
Jan 1 01:00:05 kernel: Manufacturer: ZTE, Incorporated
Jan 1 01:00:06 kernel: Product: ZTE CDMA Technologies MSM
Jan 1 01:00:06 kernel: usb.c: USB device 3 (vend/prod 0x19d2/0x2000) is not claimed by any active driver.

[air]

Jan 1 01:00:06 kernel: Length = 18
Jan 1 01:00:06 kernel: DescriptorType = 01
Jan 1 01:00:06 kernel: USB version = 2.00
Jan 1 01:00:06 kernel: Vendor:Product = 19d2:2000
Jan 1 01:00:06 kernel: MaxPacketSize0 = 64
Jan 1 01:00:06 kernel: NumConfigurations = 1
Jan 1 01:00:06 kernel: Device version = 0.00
Jan 1 01:00:06 kernel: Device Class:SubClass:Protocol = 00:00:00
Jan 1 01:00:06 kernel: Per-interface classes
Jan 1 01:00:06 kernel: Configuration:
Jan 1 01:00:06 kernel: bLength = 9
Jan 1 01:00:06 kernel: bDescriptorType = 02
Jan 1 01:00:06 kernel: wTotalLength = 0020
Jan 1 01:00:06 kernel: bNumInterfaces = 01
Jan 1 01:00:06 kernel: bConfigurationValue = 01
Jan 1 01:00:06 kernel: iConfiguration = 00
Jan 1 01:00:06 kernel: bmAttributes = a0
Jan 1 01:00:06 kernel: MaxPower = 500mA
Jan 1 01:00:06 kernel:
Jan 1 01:00:06 kernel: Interface: 0
Jan 1 01:00:06 kernel: Alternate Setting: 0
Jan 1 01:00:06 kernel: bLength = 9
Jan 1 01:00:06 kernel: bDescriptorType = 04
Jan 1 01:00:06 kernel: bInterfaceNumber = 00
Jan 1 01:00:06 kernel: bAlternateSetting = 00
Jan 1 01:00:06 kernel: bNumEndpoints = 02
Jan 1 01:00:06 kernel: bInterface Class:SubClass:Protocol = 08:05:50
Jan 1 01:00:06 kernel: iInterface = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 01 (out)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0040
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 kernel: Endpoint:
Jan 1 01:00:06 kernel: bLength = 7
Jan 1 01:00:06 kernel: bDescriptorType = 05
Jan 1 01:00:06 kernel: bEndpointAddress = 81 (in)
Jan 1 01:00:06 kernel: bmAttributes = 02 (Bulk)
Jan 1 01:00:06 kernel: wMaxPacketSize = 0040
Jan 1 01:00:06 kernel: bInterval = 00
Jan 1 01:00:06 kernel: usb.c: registered new driver usblp
Jan 1 01:00:06 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:08 kernel: Linux video capture interface: v1.00
Jan 1 01:00:08 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:08 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:08 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:08 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 01:00:11 dnsmasq[74]: DHCPREQUEST(br0) 192.168.1.89
00:1b:77:e0:a3:4d
Jan 1 01:00:11 dnsmasq[74]: DHCPNAK(br0) 192.168.1.89 00:1b:77:e0:a3:4d lease not found
Jan 1 01:00:13 kernel: USB Mass Storage support registered.
Jan 1 01:00:13 kernel: usb.c: USB disconnect on device 00:03.0-1.1 address 3
Jan 1 01:00:14 dropbear[112]: Running in background
Jan 1 01:00:15 dnsmasq[74]: DHCPDISCOVER(br0) 00:1b:77:e0:a3:4d
Jan 1 01:00:15 dnsmasq[74]: DHCPOFFER(br0) 192.168.1.89 00:1b:77:e0:a3:4d
Jan 1 01:00:15 dnsmasq[74]: DHCPREQUEST(br0) 192.168.1.89 00:1b:77:e0:a3:4d
Jan 1 01:00:15 dnsmasq[74]: DHCPACK(br0) 192.168.1.89 00:1b:77:e0:a3:4d notebookamilo
Jan 1 01:00:18 kernel: hub.c: new USB device 00:03.0-1.1, assigned address 4
Jan 1 01:00:18 kernel: Manufacturer: ZTE, Incorporated
Jan 1 01:00:18 kernel: Product: ZTE CDMA Technologies MSM
Jan 1 01:35:39 wan: connecting manually
Jan 1 01:35:45 kernel: usb.c: registered new driver acm
Jan 1 01:35:45 kernel: acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters (patched)
Jan 1 01:35:46 kernel: usb.c: registered new driver serial
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for Generic
Jan 1 01:35:46 kernel: usbserial.c: USB Serial Driver core v1.4
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for Modem
Jan 1 01:35:46 kernel: modem.c: GSM/CDMA modem driver v0.1
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for PL-2303
Jan 1 01:35:46 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan 1 01:35:46 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan 1 01:35:46 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan 1 01:35:53 pppd[642]: no device specified and stdin is not a tty

Diagnostic Info:
Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #109 Fri Oct 17 09:11:33 CEST 2008
1.9.2.7-10-USB-1.71

Thu Jan 1 01:34:08 MET 1970
01:34:08 up 34 min, load average: 0.04, 0.02, 0.00


Interfaces

br0 Link encap:Ethernet HWaddr 00:23:54:6F:72:03
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1277 errors:0 dropped:0 overruns:0 frame:0
TX packets:1045 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:69060 (67.4 KiB) TX bytes:1033947 (1009.7 KiB)

eth0 Link encap:Ethernet HWaddr 00:23:54:6F:72:03
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1055 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 B) TX bytes:69614 (67.9 KiB)
Interrupt:4 Base address:0x1000

eth1 Link encap:Ethernet HWaddr 00:23:54:6F:72:03
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1276 errors:0 dropped:0 overruns:0 frame:59131
TX packets:2092 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:86918 (84.8 KiB) TX bytes:1106667 (1.0 MiB)
Interrupt:13 Base address:0x5000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MULTICAST MTU:16436 Metric:1
RX packets:2111 errors:0 dropped:0 overruns:0 frame:0
TX packets:2111 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:237242 (231.6 KiB) TX bytes:237242 (231.6 KiB)

vlan0 Link encap:Ethernet HWaddr 00:23:54:6F:72:03
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1055 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:69614 (67.9 KiB)



Routing Table

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo


ARP Table

IP address HW type Flags HW address Mask Device
192.168.1.89 0x1 0x2 00:1B:77:E0:A3:4D * br0


IP Tables

Chain INPUT (policy ACCEPT 3162 packets, 295K bytes)
pkts bytes target prot opt in out source destination

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 3149 packets, 1255K bytes)
pkts bytes target prot opt in out source destination

[air]

IP Tables NAT

Chain PREROUTING (policy ACCEPT 249 packets, 13203 bytes)
pkts bytes target prot opt in out source destination

Chain POSTROUTING (policy ACCEPT 204 packets, 12228 bytes)
pkts bytes target prot opt in out source destination

Chain OUTPUT (policy ACCEPT 204 packets, 12228 bytes)
pkts bytes target prot opt in out source destination


Mount points

/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)


Filesystem info

Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 3008 3008 0 100% /


Partitions



USB HDD info

Attached devices: none


Process List

PID Uid VmSize Stat Command
1 admin 612 S /sbin/init
2 admin SW [keventd]
3 admin SWN [ksoftirqd_CPU0]
4 admin SW [kswapd]
5 admin SW [bdflush]
6 admin SW [kupdated]
7 admin SW [mtdblockd]
61 admin 316 S telnetd
66 admin 448 S httpd vlan1
71 admin 360 S klogd
72 admin 400 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
74 nobody 468 S [dnsmasq]
75 admin SW [khubd]
83 admin 276 S lpd
85 admin 260 S p9100d -f /dev/usb/lp0 0
87 admin 344 S rcamdmain
91 admin SW [usb-storage-0]
92 admin SW [scsi_eh_0]
96 admin 312 S infosvr br0
97 admin 452 S watchdog
100 admin 344 S ntp
112 admin 468 S dropbear
521 admin 464 S sh -c /tmp/../usr/sbin/sysinfo > /tmp/sysinfo.htm
522 admin 504 S /bin/sh /tmp/../usr/sbin/sysinfo
539 admin 400 R ps


Kernel Modules

usb-storage 63928 0 (unused)
sd_mod 13276 0 (unused)
scsi_mod 70200 2 [usb-storage sd_mod]
videodev 8312 0 (unused)
printer 12964 0 (unused)
usb-ohci 21908 0 (unused)
usbcore 86792 1 [usb-storage printer usb-ohci]
ip_nat_ftp 3912 0 (unused)
ip_conntrack_ftp 5216 1
wl 897368 0 (unused)
et 31288 0 (unused)


USB Devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=b8003000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=2000 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE CDMA Technologies MSM
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms


USB devfs Devices

Device : Location : Info


FlashFS file list

tmp/local
tmp/local/sbin
tmp/local/sbin/post-backup
tmp/local/sbin/pre-backup
tmp/local/sbin/post-mount
tmp/local/sbin/resetpressed
tmp/local/sbin/pre-shutdown
tmp/local/sbin/post-boot
tmp/local/sbin/ez-setup
tmp/local/sbin/post-firewall
tmp/local/sbin/pre-boot
tmp/local/sbin/pre-mount
tmp/local/.files
tmp/local/etc
tmp/local/etc/dropbear
tmp/local/etc/dropbear/dropbear_rsa_host_key
tmp/local/etc/dropbear/dropbear_dss_host_key
tmp/local/etc/usb_modeswitch.conf
tmp/local/root


CPU Info

system type : Broadcom BCM5354 chip rev 2 pkg 0
processor : 0
cpu model : BCM3302 V2.9
BogoMIPS : 237.56
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
VCED exceptions : not available
VCEI exceptions : not available
unaligned_instructions : 3
dcache hits : 0
dcache misses : 0
icache hits : 0
icache misses : 0
instructions : 0


Memory

total: used: free: shared: buffers: cached:
Mem: 31051776 14217216 16834560 0 1781760 6578176
Swap: 0 0 0
MemTotal: 30324 kB
MemFree: 16440 kB
MemShared: 0 kB
Buffers: 1740 kB
Cached: 6424 kB
SwapCached: 0 kB
Active: 3428 kB
Inactive: 6200 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 30324 kB
LowFree: 16440 kB
SwapTotal: 0 kB
SwapFree: 0 kB

USB Devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=b8003000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 2
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0424 ProdID=2502 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=2000 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE CDMA Technologies MSM
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

[newbiefan]

Also, die extrem vielen Log und Infos kann man auch packen und als Zip File anhaengen.:eek:

Zu deinem Problem:
Ich wuerde zuerst nach der Vid/Pid vom Modem googeln.
Danach kann man die passende Vid/Pid im Webif eintragen.
Weiters kann man im Webif verschiedene Modems ausprobieren, irgend ein Modem hat wahrscheinlich eine fast gleiche Hardware z.Bspl. E160, E169 - aber immer die passende Vid/Pid eintragen.
Zur Not auch auf anderen Linux Seiten googeln, man bekommt viele Hinweise.

Naja und das E169 hat auch einen kleinen Cardreader eingebaut und geht problemlos mit der Koppel 1.71
Du musst auch folgendes ausprobieren: auf der Konsole einen Reboot durchfuehren, zumindest wenn das Modem blau blinkt und nach ein paar Minuten nocht immer nicht online ist. Falls das funktioniert, findest du passende Scripts im deutschen UMTS/GPRS Thread.

have fun

[air]

Habe alle Modems probiert. als vid/pid 0x19d2/0x0031.
funktioniert nicht.
komme gar nicht bis zu der blaublinkenden led. bin immer noch im storgae mode.
Was könnte ich sonst noch versuchen?

Jan 1 01:00:14 kernel: USB Mass Storage support registered.
Jan 1 01:00:14 kernel: usb.c: USB disconnect on device 00:03.0-1.1 address 3
Jan 1 01:00:16 kernel: usb.c: registered new driver acm
Jan 1 01:00:16 kernel: acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters (patched)
Jan 1 01:00:16 dropbear[126]: Running in background
Jan 1 01:00:16 kernel: usb.c: registered new driver serial
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for Generic
Jan 1 01:00:16 kernel: usbserial.c: USB Serial Driver core v1.4
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for Modem
Jan 1 01:00:16 kernel: modem.c: GSM/CDMA modem driver v0.1
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for PL-2303
Jan 1 01:00:16 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan 1 01:00:16 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan 1 01:00:17 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan 1 01:00:20 kernel: hub.c: new USB device 00:03.0-1.1, assigned address 4
Jan 1 01:00:20 kernel: Manufacturer: ZTE, Incorporated
Jan 1 01:00:20 kernel: Product: ZTE CDMA Technologies MSM
Jan 1 01:00:23 pppd[159]: In file /tmp/ppp/peers/gprs: unrecognized option '/dev/usb/tts/0'