Bekijk de volledige versie : [MOVED]Write to HDD via Samba Network

15-03-2005, 15:17
Hello all,

I'm having trouble to get my HDD to write. I'm able to read the disc via: \\router500g\share$ but I'm not able to write to it.
I have already read alot about this but I'm still not able to get it done.
I have the latest Oleg firmware on the WL-500g installed and have a post-boot file with nmbd and smbd. I also have the /etc/smb.conf with following info:
workgroup = WERKGROEP
guest account = nobody
security = share
read only = No
guest ok = yes
guest only = yes
log level = 1
max log size = 100
encrypt passwords = no
preserve case = yes
short preserve case = yes
host deny = ALL
host allow = 192.168.1/
server string = WL-500g
preserve modes = yes
case sensitive = yes

comment = WD-HDD
path = /tmp/harddisk
read only = No
browseable = no
guest ok = yes
writeable = yes

and the /etc/host: localhost.localdomain localhost router500g my.router my.WL500g

and mount:
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/discs/disc1/part1 on /tmp/harddisk type vfat (rw,sync)

With a Fat32 WD HDD

What's wrong? Has anyone an idea?

15-03-2005, 16:31
Just after I had posted my thread the new firmware of Oleg was posted.
With this new firmware everything is working fine.

Thanks Oleg!!!

30-03-2005, 13:42
to others reading this thread, this symptom can be caused by the NTFS filesystem