JTAG WL-500W????

[dreKion]

someone knows how to connect JTAG to the board?

I found this for BCM4704:

http://wl500g.info/attachment.php?attachmentid=9579&d=1370470995

[Oleg]

No way. JTAG pins are not wired out of BGA chip.

I'm wonder, where you've got pinout?

[dreKion]

I'm not sure... My router is bricked... When I turn on the four leds LAN1,lan2,lan3,lan4 are turn on and the others turn off... The pc not recognize the LAN port of the router.... no ping...

I had hoped to make it work

Any idea??

[dreKion]

can I change firmware using serial port of router?

[Oleg]

I'm not sure... My router is bricked... When I turn on the four leds LAN1,lan2,lan3,lan4 are turn on and the others turn off... The pc not recognize the LAN port of the router.... no ping...

I had hoped to make it work

Any idea??

Replace router power supply.

[dreKion]

I change the power device from my dlink2100 and the asus works same...
:confused::confused::confused:

[p4trykx]

I know that wl-500w doesn't have jtag connector on board. But I was wondering if there is some way to figure out where to connect jtag.

I've found this topic on dd-wrt forum http://www.dd-wrt.com/phpBB2/viewtopic.php?t=16530

Does anyone has a CE report for wl-500w. There is one for wl-500gp.http://wl500g.info/showthread.php?p=56699