Bekijk de volledige versie : Newbiequestion WL-HDD which Firmware ?
stefan9113
05-02-2005, 08:53
Hallo there, can anybody help me? I have an ASUS WL-HDD and I want nfs on it an the TwonkyVision Mediaserver, what must I do and what thing do I need? Sorry about my English, I'm from Germany. Thanks
Greetings from Bavaria Stefan
i've got the same problem!
please help us.
Well ..... nfs installation is easy enougth,
1 Get latest Oleg's firmware sources, GPL asus sources and addver.
2 Modify kernel's config in Oleg's sources to enable NFS server features.
3 Get tcp_wrappers, jockey sad it not nessesary but i use them
4 Get portmap, i took portmap5beta and debian's patches
5 Get nfs-utils
6 Compile all above and put in your wl-hdd
Enjoy ....
I'l put patches and firmware here after work.
stefan9113
07-02-2005, 10:55
but there is a little problem.
Get the files is no problem, but the rest (compile and others), that is a problem. I have make a Linksys uNSLUng for my Brother, that works with my Linux knowledge. I think i'm not so good in Linux to do this. I have an second PC with Linux Debian on it, for learning, but I'm at the beginning. Is there a way to load or get a ready compile Image, that I can load to the ASUS WL-HDD. :o
Thank you greeting Stefan
well you can download firmware with nfs support from
http://ezhikov.homelinux.net/
also tools to start nfs server ....
stefan9113
08-02-2005, 09:36
I have load the two files. If I at home this evening I load the WLHDD... with Webfront in the ASUS. Then I will try to handle the NFS. Thank' very much for the download.
Greetings from Stefan
Antiloop
08-02-2005, 14:35
well you can download firmware with nfs support from
http://ezhikov.homelinux.net/
also tools to start nfs server ....
are you using this firmware yourself ?
and running nfs.. if so what speed do you achieve?
yes i use it ..... about 2.5 mbs/s ....
stefan9113
08-02-2005, 16:02
i can get into telnet, but I see not my 40 GB Harddisc, Samba and NFS nont work jet. What can I do to mout the inside hdd? And how get I the other files on it?
Greetings, Stefan
P.S. thanks for the help
yes i use it ..... about 2.5 mbs/s ....
Hi,
what do you mean with mbs/s ?
Is it MegaByte/sec or MegaBit/sec ?
Also, how dit you messure this??
Ciao,
Pepe
2.5 megabytes per second
first you need to create disk partitions with fdisk then
enable swap with swapon and format partitions ...
then mount them
to run nfs you have to upload nfs utils with http or ftp,
then configure /etc/exports
run portmap mountd and nfsd .....
as in usual linux system ....
2.5 megabytes per second
How did you messure this?
What was the setup when it was messured?
(Hub, Switch, Crossover cable?)
Ciao,
Pepe
time cp linux-2.6.9.tar.bz2 /mnt/micron
du -sh linux-2.6.9.tar.bz2
switch
stefan9113
09-02-2005, 06:41
it dont work. I think I sell it in ebay.
One Week only with testing and trying. Sometime till 12.00 pm. I must give up. I can not mount the HDD inside.
Thanks for your help.
Stefan
No enough good howtos .....
Antiloop
09-02-2005, 13:48
it dont work. I think I sell it in ebay.
One Week only with testing and trying. Sometime till 12.00 pm. I must give up. I can not mount the HDD inside.
Thanks for your help.
Stefan
hdd will mount only while a usb stick is attached..
stefan9113
09-02-2005, 14:03
Then I will test it tonight with a HDD inside and an USB-HDD on USB Port. Or must be an USB Stick?
Thank you
well you can download firmware with nfs support from
http://ezhikov.homelinux.net/
also tools to start nfs server ....
Hi,
I'll get a directory-listing when I connect to that side. :confused:
What then ??
Rgds,
Pepe