PDA

Bekijk de volledige versie : I cannot connect on pppoe WAN with Oleg firmware



kalifro
10-10-2008, 07:56
Hi all,

First I want to said thanks to Oleg for his work (passion) for the routers ! :)


Second: for my WL-500W I try to use 2 firmware from Oleg: 1.9.2.7-10 and 1.9.2.7-9 . The update was ok and the network setting was without problems (I set manually all necessary steps).

My LAN works great. But the problem is with WAN :(. My external connection is pppoe.
With bought firmware router the external connection are stacked in same place. I try to start manual connection and the same happened. The power, WAN, LAN, Air led are flashing correctly. The connection speed with WAN is on auto negotiating.

Can see in this is the log where is the stuck point:


Jan 1 02:00:02 syslogd started: BusyBox v1.1.3
Jan 1 02:00:02 kernel: klogd started: BusyBox v1.1.3 (2008.03.17-18:24+0000)
Jan 1 02:00:02 kernel: CPU revision is: 00029006
Jan 1 02:00:02 kernel: Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Jan 1 02:00:02 kernel: Primary data cache 16kb, linesize 16 bytes (2 ways)
Jan 1 02:00:02 kernel: Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #18 Sun Mar 30 13:13:29 MSD 2008
Jan 1 02:00:02 kernel: Setting the PFC to its default value
Jan 1 02:00:02 kernel: Determined physical RAM map:
Jan 1 02:00:02 kernel: memory: 02000000 @ 00000000 (usable)
Jan 1 02:00:02 kernel: On node 0 totalpages: 8192
Jan 1 02:00:02 kernel: zone(0): 8192 pages.
.
.
.
.
.
.
Jan 1 02:00:02 kernel: Freeing unused kernel memory: 72k freed
Jan 1 02:00:02 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 02:00:02 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan 1 02:00:02 kernel: eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
Jan 1 02:00:02 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
Jan 1 02:00:02 kernel: 802.11 Wireless Controller 4.150.10.16
Jan 1 02:00:02 kernel: device eth0 entered promiscuous mode
Jan 1 02:00:02 kernel: device eth2 entered promiscuous mode
Jan 1 02:00:02 kernel: br0: port 2(eth2) entering listening state
Jan 1 02:00:02 kernel: br0: port 1(eth0) entering listening state
Jan 1 02:00:02 kernel: br0: port 2(eth2) entering learning state
Jan 1 02:00:02 kernel: br0: port 2(eth2) entering forwarding state
Jan 1 02:00:02 kernel: br0: topology change detected, propagating
Jan 1 02:00:02 kernel: br0: port 1(eth0) entering learning state
Jan 1 02:00:02 kernel: br0: port 1(eth0) entering forwarding state
Jan 1 02:00:02 kernel: br0: topology change detected, propagating
Jan 1 02:00:02 dnsmasq[54]: started, version 2.22 cachesize 150
Jan 1 02:00:02 dnsmasq[54]: DHCP, IP range 192.168.1.2 -- 192.168.1.24, lease time 24h
Jan 1 02:00:02 dnsmasq[54]: DHCP, /tmp/dnsmasq.log will be written every 8h
Jan 1 02:00:02 dnsmasq[54]: read /etc/hosts - 13 addresses
Jan 1 02:00:02 dnsmasq[54]: read /etc/ethers - 5 addresses
Jan 1 02:00:02 dnsmasq[54]: reading /tmp/resolv.conf
Jan 1 02:00:02 kernel: usb.c: registered new driver usbdevfs
Jan 1 02:00:02 kernel: usb.c: registered new driver hub
Jan 1 02:00:02 kernel: usb-uhci.c: $Revision: 1.275 $ time 20:50:46 Mar 17 2008
Jan 1 02:00:02 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 02:00:02 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
Jan 1 02:00:02 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:02 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:02 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:02 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 02:00:02 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 02:00:03 kernel: hub.c: USB hub found
Jan 1 02:00:03 kernel: hub.c: 2 ports detected
Jan 1 02:00:03 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
Jan 1 02:00:03 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:03 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:03 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:03 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 02:00:03 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 02:00:03 kernel: hub.c: USB hub found
Jan 1 02:00:03 kernel: hub.c: 2 ports detected
Jan 1 02:00:03 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 02:00:03 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
Jan 1 02:00:03 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
Jan 1 02:00:03 kernel: ehci_hcd 01:03.2: irq 12, pci mem c011c000
Jan 1 02:00:03 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 02:00:03 kernel: ECHI PCI device 31041106 found.
Jan 1 02:00:03 kernel: ECHI reg 0x49 = 80010f20
Jan 1 02:00:03 kernel: ECHI reg 0x49 changed to = 80010f00
Jan 1 02:00:03 kernel: ECHI reg 0x4b = 80010f09
Jan 1 02:00:03 kernel: ECHI reg 0x4b changed to = 80010f29
Jan 1 02:00:03 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 02:00:03 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 02:00:03 kernel: hub.c: USB hub found
Jan 1 02:00:03 kernel: hub.c: 4 ports detected
Jan 1 02:00:03 kernel: usb.c: registered new driver usblp
Jan 1 02:00:03 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 02:00:04 kernel: usb.c: registered new driver audio
Jan 1 02:00:04 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 02:00:05 kernel: Linux video capture interface: v1.00
Jan 1 02:00:05 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 02:00:05 kernel: Initializing USB Mass Storage driver...
Jan 1 02:00:05 kernel: usb.c: registered new driver usb-storage
Jan 1 02:00:05 kernel: USB Mass Storage support registered.
Jan 1 02:00:06 udhcpc[82]: udhcpc (v0.9.9-pre) started
Jan 1 02:00:06 dhcp client: deconfig: lease is lost
Jan 1 02:00:20 udhcpc[82]: No lease, forking to background.
Jan 1 02:00:21 pppd[86]: Plugin rp-pppoe.so loaded.
Jan 1 02:00:21 pppd[86]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 02:00:21 pppd[88]: pppd 2.4.2 started by admin, uid 0
Jan 1 02:00:21 pppd[88]: Using interface ppp0
Jan 1 02:00:21 pppd[88]: local IP address 10.64.64.64
Jan 1 02:00:21 pppd[88]: remote IP address 10.112.112.112
Jan 1 02:00:51 wan: connected manually
Jan 1 02:00:52 pppd[88]: Terminating on signal 15.
Jan 1 02:00:52 pppd[88]: Exit.
Jan 1 02:00:52 udhcpc[87]: Entering released state
Jan 1 02:00:52 udhcpc[87]: Received SIGTERM
Jan 1 02:00:57 udhcpc[121]: udhcpc (v0.9.9-pre) started
Jan 1 02:00:57 dhcp client: deconfig: lease is lost
Jan 1 02:01:11 udhcpc[121]: No lease, forking to background.
Jan 1 02:01:11 pppd[127]: Plugin rp-pppoe.so loaded.
Jan 1 02:01:11 pppd[127]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 02:01:11 pppd[129]: pppd 2.4.2 started by admin, uid 0
Jan 1 02:01:11 pppd[129]: Using interface ppp0
Jan 1 02:01:11 pppd[129]: local IP address 10.64.64.64
Jan 1 02:01:11 pppd[129]: remote IP address 10.112.112.112


After this I put back the on router the ASUS 2.0.0.1 firmware and everything works (but I donít like the options of this firmware)


Jan 1 00:00:08 pppd[81]: Plugin rp-pppoe.so loaded.
Jan 1 00:00:08 pppd[81]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 00:00:08 pppd[82]: pppd 2.4.2 started by (unknown), uid 0
Jan 1 00:00:08 pppd[82]: Using interface ppp0
Jan 1 00:00:08 pppd[82]: local IP address 10.64.64.64
Jan 1 00:00:08 pppd[82]: remote IP address 10.112.112.112
Jan 1 00:00:09 pppd[82]: Starting link
Jan 1 00:00:09 pppd[82]: PPP session is 458
Jan 1 00:00:09 pppd[82]: Connect: ppp0 -> eth1
Jan 1 00:00:12 pppd[82]: PAP authentication succeeded
Jan 1 00:00:12 pppd[82]: peer from calling number 00:11:25:AC:5D:E3 authorized
Jan 1 00:00:12 pppd[82]: Received bad configure-ack:
Jan 1 00:00:12 pppd[82]: Local IP address changed to 79.124.33.81
Jan 1 00:00:12 pppd[82]: Remote IP address changed to 10.0.0.1
Jan 1 00:00:13 ddns update: connected to members.dyndns.org (63.208.196.95) on port 80.
Jan 1 00:00:13 ddns update: request successful
Jan 1 00:00:15 pppd[82]: Received bad configure-ack:
Jan 1 00:00:15 ddns: ddns update ok
Jan 1 00:00:18 pppd[82]: Received bad configure-ack:
Jan 1 00:00:21 pppd[82]: Received bad configure-ack:

Help me with any ideas, why my WAN cannot be connected ? :confused:

All the best !

wpte
10-10-2008, 18:37
hmm... looks weird indeed...
did you reset to factory defaults after you flashed a different fw?

I think you also might find more help in the WL-500gP part of this forum, I don't have experience with pppoe.

what I do see is, that your ip adress is different with the firmwares...
did you noticed that too? that might be the problem, and you may need too set it manually:)

kalifro
10-10-2008, 22:48
hmm... looks weird indeed...
did you reset to factory defaults after you flashed a different fw?

I think you also might find more help in the WL-500gP part of this forum, I don't have experience with pppoe.

what I do see is, that your ip adress is different with the firmwares...
did you noticed that too? that might be the problem, and you may need too set it manually:)

Thank you WPTE !

I found in WL-500gP forum area 2 helpfully threads: http://wl500g.info/showthread.php?t=14257 and http://wl500g.info/showthread.php?t=14007

Based on that I set "PPPoE Idle Disconnect Time to 0" and my connection to WAN is perfect !

I'm happy now !!! :D

Thank's Oleg and all the others.

P.S. Now I should learn some linux !

cyberops
20-03-2011, 23:39
i've probably the exact same problem with my wl500gp. gonna try that :)