Bekijk de volledige versie : Manual frequency set

23-01-2005, 22:44
Just one question?

It is possible to manualy enter frequenci where miniPCI module will transmit...
i would like to try transmit on HAM radio frequencies
for example at frequency 2304MHz.

How i can do this? :eek:

26-01-2005, 00:24
AFAIK you can't set the frequency to random value with current wireless driver. I tested this using iwconfig - any frequency parameter which did not match one of the valid channel frequencies was rejected:

iwconfig eth2 freq 2.418G
Error for wireless request "Set Frequency" (8B04) :
SET failed on device eth2 ; Operation not permitted.