Help! WL500gx-1.9.2.7-10, what's the password?

[twoblink]

I just installed WL500gx-1.9.2.7-10.trx of olegs. It is up and running, but I don't know what the default login and password is!

I tried admin/admin and every combo therein.. but no go..

Any help would be appreciated...

[al37919]

flashing of the firmware doesn't change the login/password. If you don't know your login/password reset your router's nvram to the default state (by button on the back).

[twoblink]

Well, I found out that it was a nvram problem.

Had to flash it first clearing the nvram, then the recovery, then the new firmware.

That allowed me to use admin/admin to log in.