Bekijk de volledige versie : problem with two routers and adsl
waterskier
28-04-2008, 19:29
Please can you help me. I have this problem . I have one router with adsl (the interface is not very user friendly and it has not so myny functions as my wl500gp) modem and wl500gp. I want my wl500gp to be connected to internet by pppoe but i can't connect it to the wan port because i need another computers to be conected to the adsl router. Can you advise me how to set it up to let the wl500gp think that the adsl is connected is connnected to wan? Thank you for your responses. Excuse my bad English. ;)
waterskier
29-04-2008, 18:43
http://i301.photobucket.com/albums/nn53/waterskier1/Novrastrovobrzek.jpg
please can anyone help me? This is a scheme of my network
Why can`t you connect ADSL router to Asus through WAN?
waterskier
30-04-2008, 06:45
becasue i nedd other comuters to be connected to that adsl modem as to switch it is on the picture
Hi and sorry my English.
Change wl500g router wan mode to dynamic. If you set it, the wl500g router is a "PC" for adsl modem_and_router combo.
Disable any firewall in router (wl500g), change ip settings from 192.168.1.1 to 192.168.2.1 in a router and any connected PC. And work fine...
If you use windows net pc1..3 and pc4..6, set workgroup name equ both subnet. You can use the shares :
net use <drive:> \\ip_addr\share_name
I remember, share with \\computername\share_name not working, but I don't use it since 2 year...
bye,
George
you could try this way..
all computers will be in network, and will have internet access
http://img27.picoodle.com/img/img27/4/4/30/f_untitled1m_f5d221d.jpg
waterskier
01-05-2008, 09:10
Thank you but when i did it like you told me pc 1,2 and 3 dont get dhcp lease throughthe wan port. Should i set something else?
Have you turned on DHCP server on ADSL router?
I don`t know exactly how to configure your ADSL router, but you should try to turn on DHCP server in LAN settings... You could probably find LAN settings in Advanced Setup or something similar...
waterskier
01-05-2008, 16:06
I tryed everything but when it is connected though wan port i cant even ping to wl500gp
try to set static IPs on PC1,2,3
PC1 - 192.168.1.3
PC2 - 192.168.1.4
PC3 - 192.168.1.5
4,5,6 have internet access through Asus and ADSL router?
waterskier
02-05-2008, 07:04
i tryed but only thing when it was working was wheni conected my nb to wl500gp and than connected to that adsl router so it worked but when i set renew ip addres it didnt get any. I dont want to set the ip addreses manualy isnt there any otherway? What i thing is that that wl500gp cant lease ip addresses though wan on any circumstances (but maybe I am wrong).
What about connecting it to normal lan port on wl500 and then some how route it that it would look like it is connected to the wan. I tryied something like this but i dont realy know how th routing works
I don`t know really.. It should work.. I have similar network as yours, configured the same as I described it to you.. and it works as with no problems.. I even have Access Point connected to WL-500gP forwarded ports for every computer..
waterskier
03-05-2008, 16:38
thats strange isnt there just some small stupid setting I overlooked which should be set some other way to let the wl500 lease the ip s to computers on wan port
but you can not attach the computer to Asus`s WAN port..
you should attach ADSL modem to ASUS`s WAN...and configure everything exactly I described... I don`t know better.. but I suppose it can`t be better than that..
waterskier
05-05-2008, 06:09
I can connect it to wan port, ut when i do so it doesn't lease the ip though the wan port. I am sure i did everithing lilke you wrote.
I`ll try once again
you should configure your ADSL router`s LAN settings like this..
The most important is that ADSL router`s LAN IP is 192.168.1.1 and Subnet mask 255.255.255.0.. The other settings depend on router or ISP
AND you have to turn od DHCP, also depends on your ADSL router
http://img214.imageshack.us/img214/1395/screenhunter07may060050ez3.jpg
Now you need to configure your WL-500gP like this..
These are screenshots from my WL-500gP with Oleg`s FW.. Settings are the same for you.
You may need to change the DNS server to your ISP`s..
Hope you`ll manage to configure it successfully now..
WAN & LAN
http://img214.imageshack.us/img214/1986/screenhunter01may060046ex5.jpg
http://img213.imageshack.us/img213/9309/screenhunter02may060046zh3.jpg
http://img505.imageshack.us/img505/1817/screenhunter03may060047og6.jpg
DHCP Server
http://img404.imageshack.us/img404/2903/screenhunter04may060047uw4.jpg
http://img337.imageshack.us/img337/6632/screenhunter05may060048wn1.jpg
http://img214.imageshack.us/img214/7158/screenhunter06may060049pk5.jpg
waterskier
06-05-2008, 16:26
do you thing that the problem could be that i have original fw not oleg's?
no.. That can`t be the problem since my network was working with original fw also..
Have you tried configuring like this?
It is slightly different menu that with Olegs..
waterskier
09-05-2008, 19:43
no.. That can`t be the problem since my network was working with original fw also..
Have you tried configuring like this?
It is slightly different menu that with Olegs..
Now i realy dont know i did exactly as you wrote an dturned off all firewalls on both routers and it didnt work. :(
I`m sorry man, I would be glad if I could help you, but I really don`t know what else could I suggest you to try... :(
regards from Serbia...