sasha_mn
22-04-2008, 07:12
Flashed as in the instructions:... After the firmware is flashed the asus, wait 30 seconds and restart router either by unplugging power cord or pressing RESET button with pencil. After restart wait 30 seconds and telnet to 192.168.1.1 Here at this moment, when WL700ge boots but and not ping. it does not enter or telnet nor ssh in any way.
It happens and the closer alternative: after reloading at all times blinking flashes led "ready", and do not ping.
Once a case that started WL700ge, and all services found wifi, PPPoE - everything work, but I turned off its pressing the "power" button -> wl700ge, hdd stopped, stopped Ping, accomplish it, I was not able, to just "reset", and after it is not Ping, does not detect a network.
what can I do?:confused:
Installation of firmware KFurge either the original Asus firmware passes without problems!
It happens and the closer alternative: after reloading at all times blinking flashes led "ready", and do not ping.
Once a case that started WL700ge, and all services found wifi, PPPoE - everything work, but I turned off its pressing the "power" button -> wl700ge, hdd stopped, stopped Ping, accomplish it, I was not able, to just "reset", and after it is not Ping, does not detect a network.
what can I do?:confused:
Installation of firmware KFurge either the original Asus firmware passes without problems!