is it dead?

[bado]

hi! i think i killed it :(

I play with several fws openwrt, Kfuge, original asus.
Then i install my new 500gb hdd and try to install kfuge 1078 fw!
everything was excellent but, when i power off after night and try to power on it's didn't boot... Then, when i try to boot - nothing!

Now i have white brick... mmm... green plated circuit with power and network cable connected.

Nothing to work, no blinking, nothing. I try unplug and plug the battery under the plated circuit, but it's stell dead.

When i power on and plug the network cable to my PC - PC find that network cable connect, but doesn't ping 192.168.1.1.

I try to push and hold all the buttons i find on my router and nothing.
But when i push the reset button, my PC lost the cable signal from wl700ge and after seccond find again - so... my be it's still alive or not?

Any ideas?

[kfurge]

Chances are it's still alive. I've done a lot of flashing to my router, including flashing total garbage into it and haven't killed it yet.

Try to dig up the thread that talks about using tftp to upload just the kernel portion of the .trx file. Follow the recovery directions in that thread. This might also be helpful:

http://wl700g.homelinux.net/drupal/?q=comment/reply/54

- K.C.

[bado]

Chances are it's still alive. I've done a lot of flashing to my router, including flashing total garbage into it and haven't killed it yet.

Try to dig up the thread that talks about using tftp to upload just the kernel portion of the .trx file. Follow the recovery directions in that thread. This might also be helpful:

http://wl700g.homelinux.net/drupal/?q=comment/reply/54

- K.C.

it's even doesn't ping... it's even doesn't blink power or any other buttons or leds and, of course, TFTP doesn't work too due timeout.

[gratitude182]

do you have tried this:

http://www.wl500g.info/showthread.php?t=8070

grat182

[bado]

do you have tried this:

http://www.wl500g.info/showthread.php?t=8070

grat182
of course...

[gratitude182]

have you have tried the old hd?