External antenna connector

[larsv]

Can anyone tell me?

I need to connect an external antenna. I dont care about the fact that the connector is deeply recessed in the case. I just have to hack the case.....

This site http://www.gets.nl/pd-910402856.htm?categoryId=12 states that it should be an reverse SMA connector, but I dont think so. I would say that it looks more like a MC connector....

BTW: Tim has a picture of the board: http://www.fizzle.org.uk/ It is the "1" External antenna connector I am intrested in.

... and here is a picture of just the connector:

larsv

[Bebson]

I desolder original connector and solder RSMA pigtail ( from Dlink DI-624 ). Working fine for me...

[yapi]

...or u can do like this :p
http://www.zawireless.net/galerija/details.php?image_id=3&sid=16b2fcdd87d892257fd327e3322eea16

[deuce70]

Unfortunately, replacing the test connector like for the 300g didn't work for my WL-330g. Finally I found the reason for this on the following website:

http://www.vlemmings.com/asus330g.htm

I also did the modification myself (was scared of damaging the PCB, but it worked out fine) and it works great.