thijs
03-11-2004, 10:29
This is probabaly a newby question because I'm a newbie to this. The fact is that I only want to use the 500G as a wireless Access Point (well at least to start with). But when I select the AP-mode in the system-setup (while connected to the 500G through the Lan1 connection), I loose connection to the 500G (after saving) :the 192.168.1.1 is not available anymore and neither is the ip-address it received from the external DHCP-service (atleast not via the LAN1). I use the latest firmeware (upgraded it yesterday).
The reason why I only want to use it as an AP at the moment is that I don't know how to connect by vpn to the companies network. So if there is a answer to that problem, I would also be saved.
I really tried finding an answer to both probs, but have not fond anything
The reason why I only want to use it as an AP at the moment is that I don't know how to connect by vpn to the companies network. So if there is a answer to that problem, I would also be saved.
I really tried finding an answer to both probs, but have not fond anything