PDA

Bekijk de volledige versie : 54G LRS mssing in custom Firmware 1.8.1.7



Gersh3
23-10-2004, 15:03
Oleg,

In firmware 1.8.1.7 the 54G LRS option is missing. With the older firmwares I could connect my old kobishi 802.11b usb networkadaptor via 54g LRS option. I tried to connect to the wl500g with the 1.8.1.7-2 firmware, however without succes.
Is it possible to make the 54G LRS option available again?

Thanks.

Gersh

Oleg
23-10-2004, 22:21
Oleg,

In firmware 1.8.1.7 the 54G LRS option is missing. With the older firmwares I could connect my old kobishi 802.11b usb networkadaptor via 54g LRS option. I tried to connect to the wl500g with the 1.8.1.7-2 firmware, however without succes.
Is it possible to make the 54G LRS option available again?

Thanks.

Gersh
I've found wl option called LRS. But I've no idea, there it was before. You mean web interface?
For now you can add this command to post-boot

wl gmode LRS.

Also, do you've a mixed network?

brubber
23-10-2004, 23:14
IYou mean web interface?
It's in the webinterface of 1.6.5.3 "Wireless inteface" as on the options for 54g mode

Gersh3
24-10-2004, 09:26
Via the webinterface there was an option in "wireless interface/54G mode". I needed to select 54 LRS to connect my kobishi 802.11b card (Atmel chipset i think).

My neighbour uses the kobishi card for sharing my internetconnection. In my laptop I use a WL100g which connect fine at 54G.

Gonna try the settings in post-boot this evening.