WL-HDD copy data TO a USB Card Reader?

[cominss]

WL-HDD -> USB CARD READER -> SD CARD

Is it possible to copy data from the WL-HDD TO USB SD-CARD reader?

I know there is an auto copy FROM the USB device, but would realy like to be able to copy files from the WL-HDD onto a memory card.

Maybe there is a hack / procedure?

Thanks

Shane

[hugo]

You should first check you can run telnet, maybe using JockyW customised firmware, or my post in this (http://wl500g.info/showthread.php?t=1017) tread.

Once you have access to the telnet command, just mount your usb disk if it is not already mounted (check by using the mount command if it is there, otherwise type


mkdir /tmp/usbdisk

then


mount /dev/scsi/host1/bus0/target0/lun0/part1 /tmp/usbdisk to mount it. just browse the /dev/scsi folder to check if your usb device is under another name (host2 or 3 for example))

Once you have it mounted, just use the mv or cp command to place files on it: files should be in /tmp/usbdisk

You should then finish by a umount command to close the file system properly

[kaser]

Asus WL500gx


I've inserted an usb card reader with an memory stick 512 megas and got this:



Jan 1 02:02:18 kernel: hub.c: new USB device 01:02.2-1, assigned address 3
Jan 1 02:02:20 kernel: Device 08:00 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:00, sector 2
Jan 1 02:02:20 kernel: EXT3-fs: unable to read superblock
Jan 1 02:02:20 kernel: MSDOS FS: Using codepage 950
Jan 1 02:02:20 kernel: MSDOS FS: IO charset cp950
Jan 1 02:02:20 kernel: Device 08:00 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:00, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: FAT: freeing iocharset=cp950
Jan 1 02:02:20 kernel: Device 08:00 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:00, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: Device 08:00 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:00, sector 0
Jan 1 02:02:20 kernel: NTFS: Reading super block failed
Jan 1 02:02:20 kernel: Device 08:20 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:20, sector 2
Jan 1 02:02:20 kernel: EXT3-fs: unable to read superblock
Jan 1 02:02:20 kernel: MSDOS FS: Using codepage 950
Jan 1 02:02:20 kernel: MSDOS FS: IO charset cp950
Jan 1 02:02:20 kernel: Device 08:20 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:20, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: FAT: freeing iocharset=cp950
Jan 1 02:02:20 kernel: Device 08:20 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:20, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: Device 08:20 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:20, sector 0
Jan 1 02:02:20 kernel: NTFS: Reading super block failed
Jan 1 02:02:20 kernel: Device 08:30 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:30, sector 2
Jan 1 02:02:20 kernel: EXT3-fs: unable to read superblock
Jan 1 02:02:20 kernel: MSDOS FS: Using codepage 950
Jan 1 02:02:20 kernel: MSDOS FS: IO charset cp950
Jan 1 02:02:20 kernel: Device 08:30 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:30, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: FAT: freeing iocharset=cp950
Jan 1 02:02:20 kernel: Device 08:30 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:30, sector 0
Jan 1 02:02:20 kernel: FAT: unable to read boot sector
Jan 1 02:02:20 kernel: Device 08:30 not ready.
Jan 1 02:02:20 kernel: I/O error: dev 08:30, sector 0
Jan 1 02:02:20 kernel: NTFS: Reading super block failed