Firmware upgrade failed (trying to restore)

[Biff74]

After a firmware downgrade from the asus official 1.8.1.7 to 1.7.5.6, the WL500g crashed and never completed the upgrade.
Now the power light flashes and I can`t access the router.
I have tried the firmware restore software, using different versions of the firmware, but it fails to complete.

I get:
"Upload fails! please check the connection"

After that power light stop flashing.
I have tried to press the restore button in the back with and without power on the unit.

I use a Acer laptop with static IP: 192.168.1.2, Subnet 255.255.255.0 connected directely to the router.

Please help me out here, im a newbee so be gentle.

[Antiloop]

well in first place you should not have upgraded at all,
try uploading wl500g-recover.trx or something like that

it is SOMEWHERE located in a post at this forum

[grom]

Are you connecting wireless or wired? If you are connecting wireless, try a wired connection to one of the four ports. Make sure the ip's are in the range 192.168.1.x where x for the computer not equals 1.

[Biff74]

Thanks.
Took me a while to find the recovery file, but after that everything went smooth
http://wl500g.dyndns.org/wl500g-recover.trx

[Gabriel]

hi,
i have the same problem with the wl500g
and the recover firmware not working for me

[xtraya]

I have luck because i uploaded firmware, and forgoted to turn off proxy server in my wifi network

and firmware traveled 6 times over wireles , but everything was ok...

[Oleg]

Сообщение от Gabriel

hi,
i have the same problem with the wl500g
and the recover firmware not working for me

recover firmware requires establishing telnet session to the router. Use this one instead:

http://wl500g.dyndns.org/wl500g-clear-nvram.trx

it should wipe the nvram automatically.

[PHanToMiC]

can i use this software with web interface also?