Mwget WebUI for wget

[mee0093]

Hello, asus wl500g users.

My name is mee, I come from http://wl500gp.sirikasedpan.com, a webboard of asus wl500gP user in Thailand.

At first, I must inform that English is not my mother tongue. Please be patient with my english.


I have developed a Perl cgi script for download HTTP and FTP via webUI, Mwget.

Mwget is a web interface for wget, which can download under http and ftp protocol. This program is developed from wget4web.For more information, please visit http://irodov.nm.ru/wget4web/ , the original website of wget4web.

This script is still in test phase, I and other users from http://wl500gp.sirikasedpan.com have tested it for a while.

Feature
- Download HTTP and FTP.
- Download HTTP and FTP using password.
- Process control (Pause and resume).
- Bandwidth management.
- Log file size management.


screenshot






installation
http://wl500gp.sirikasedpan.com/viewtopic.php?t=411

Mwget
http://wl500gp.sirikasedpan.com/view...?t=376&start=0

[mee0093]

For Mark

[metamorphose]

Hi,


where should I extract ZIP-file exactly to?

Would it be the right place?

/shares/MYVOLUME1/MYSHARE1/web/Layout_English/

[mee0093]

Hi,


where should I extract ZIP-file exactly to?

Would it be the right place?

/shares/MYVOLUME1/MYSHARE1/web/Layout_English/

Extract Mwget.zip and copy directory Mwget in cgi-bin
directory in your Web server.

Normally the path of webserver is
/opt/share/www/cgi-bin

and you should have something like this
/opt/share/www/cgi-bin/Mwget

[metamorphose]

Hi,



I am a little bit confused. I have ASUS WL-700gE router with kfurge custom firmware and I have found only these 2 directories where web server could be:

~/www

or

~/apps/www

But both of them do not contain cgibin directory.

cgi-bin directory exists only under cups directory, that must not be web server directory I am sure.

Should I need anything else what I have not installed yet?

[mee0093]

Hi,



I am a little bit confused. I have ASUS WL-700gE router with kfurge custom firmware and I have found only these 2 directories where web server could be:

~/www

or

~/apps/www

But both of them do not contain cgibin directory.

cgi-bin directory exists only under cups directory, that must not be web server directory I am sure.

Should I need anything else what I have not installed yet?

Oh. I think Mwget can't be used in your case.
In fact Mwget requires only wget and perl, however, various configurations are refered under oleg firmware, for example, wget and perl package must be stored at /opt/bin/.
But i think path problem can be solved.

I have no idea about cgi-bin, so I suggest you to ask your firmware community about cgi-bin directory.

[Marks]

Hi mee0093.
I see the new version on your site. It would be good to duplicate new releases on this site.
Thanks

[mee0093]

Hi mee0093.
I see the new version on your site. It would be good to duplicate new releases on this site.
Thanks

Thanks Marks.

my newest version, 1.07.1a, still has some bugs (not critical).
after i manage those bugs i will duplicate it.
however, if you want to be a guinea pig, i will send it to you ,

[Marks]

my newest version, 1.07.1a, still has some bugs (not critical).
after i manage those bugs i will duplicate it.
however, if you want to be a guinea pig, i will send it to you ,

Thanks mee0093
No, I don`t want to be a guinea pig I'll be waiting

[metamorphose]

Oh. I think Mwget can't be used in your case.
In fact Mwget requires only wget and perl, however, various configurations are refered under oleg firmware, for example, wget and perl package must be stored at /opt/bin/.
But i think path problem can be solved.

I have no idea about cgi-bin, so I suggest you to ask your firmware community about cgi-bin directory.

Hi,


as I thought first of all I had to install a web server (I choose thttpd) and after that I can copied files to /opt/share/www/cgi-bin/mwget directory (I used only lower characters in paths).

I left untouchable /opt/share/www/cgi-bin/mwget/data/users.cgi to able to use default admin/admin user and password. Finally, I set up basic properties in /opt/share/www/cgi-bin/mwget/data/info.cgi:

# Directory for Wget logs
$logsdir = "/shares/MYVOLUME1/MYSHARE1/mwget/logs";

# Directory for tasks for wget
$tasksdir = "/shares/MYVOLUME1/MYSHARE1/mwget/tasks";

# There save downloading files
$filesdir = "/shares/MYVOLUME1/MYSHARE1/mwget/files";

However I set up everything (I hope), when I typed in my web browser http://192.168.1.1:81/cgi-bin/mwget/mwget.cgi (port 81 is the default port of my web server), only the Perl program code appears!

I do not know why, as perl is installed on my router. Could anyone help me?

[Marks]

metamorphose
Try to edit first string mwget.cgi

#!/opt/bin/perl

replace to a directory where the perl is installed

[metamorphose]

metamorphose
Try to edit first string mwget.cgi

#!/opt/bin/perl

replace to a directory where the perl is installed

Hi mee0093,


mwget.cgi script begins #!/opt/bin/perl string of course, because this is the own directory of my perl instance. However, it is not working.

I guess cause can be a config property. Do you know how I can set the assign .cgi files to perl in my thttpd web server?

[thE_29]

Well, the percent and the speed label arent working by me

It looks like this:

dsl-4.2.5.iso 49726K 27226K 0% ? B/s Loading

But great work! I tried the standard wget4web and yours is better to use

And after finishing it display this:

49726K 1K 0% ? B/s Loading

Is this just at my router??

[thE_29]

I have to reply and not to edit, because i found the bug

The Script ist searching for /s!
But the wget on oleg doesnt write out any /s! Just 303K or whatever!

For example wget on standard linux (local download)

5100K .......... .......... .... 100% 23.73 MB/s

On Oleg:

3450K .......... .......... .......... .......... .......... 5% 131K 8m36s

The problem is, that the wget on oleg, doesnt write out any /s! Dunno why, have to search why

Edit: the problem is the version! I compiled the wget version 1.8.1 and then you have again the KB/s or whatever

Edit2: Finally the version 1.10 is printing it out like version 1.8.1! I tried downloading and finaly i have this here

ads-linux-x86-6.5.8.tar.gz 69999K 11645K 16% 133.26 KB/s Loading

So it works now! I will load up the binary tomorrow!

[TVadim]

Well, the percent and the speed label arent working by me

It looks like this:

But great work! I tried the standard wget4web and yours is better to use

And after finishing it display this:



Is this just at my router??

http://wl500g.info/showpost.php?p=143125&postcount=4