[LPT] Printers

[Ali_V]

Tested: WORKING
Model: WL-500g
Firmware: 1.6.5.3

Device
Brandname: EPSON
Brandtype: Stylus Color 740
Parallel port: YES
URL To manufacturer: http://www.epson.com
URL To product: http://www.epson.com

[peteredhair]

Model: WL-500g
Firmware: 1.8.1.9

Device:
Brand and Model: HP Deskjet 340

URL To manufacturer: http://www.hp.com

Works just fine.

[Johann P.]

Model: WL-500g
Firmware: 1.9.2.7

Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet 1200 Series
URL To manufacturer: http://www.hp.com

Configuration:
USB
Protocol: RAW !!!

Laut Anleitung fьr die Druckerinstallation ist bei der Erstellung eines neuen Anschlusses LPR (protocol) angegeben, hier ist RAW einzustellen

[siaco]

Model: WL-500g
Firmware: 1.9.2.7-3b

Device:
Brand and Model: HP DeskJet 870Cxi

URL To manufacturer: http://www.hp.com

No problems, works great.

[joe_heaven]

Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9 (ASUS), 1.9.2.7-3c (Oleg), 1.9.2.7-6c (Oleg)
Connection: Parallel (LPT) with LPR or W2K and WinXP, Parallel (RAW) with 1.9.2.7-6c (Oleg)

Device
Brandname: EPSON
Brandtype: Stylus Color 760
URL To manufacturer: http://www.epson.com
URL To product: http://www.epson.com/cgi-bin/Store/P...oType=Overview

Note: The ink status is not shown in properties, but that is no problem for me. Update: No Ink Status also with Bidirec ON in RAW mode

[WlanMan]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4

Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet 1010
URL To manufacturer: http://www.hp.com

Tested with Raw Printing, works fine, HUB compatible.

I notice periodic, very short motor starts of the printer, seems to becaused by the id request of the Router or so. I dont know if this harms the printer over longer time.

[Fred]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-3c (Oleg)
Connection: Parallel (LPT) RAW poortnummer 9101

Device
Brandname: HP
Brandtype: 950c

[_tcr]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4
Connection: Parallel
Mode: RAW

Device
Brandname: OKI (OKIDATA CORP)
Brandtype: Okipage 8iM
URL To manufacturer: http://www.oki.com

Tested with Raw Printing, port 9101, works fine.

This is a GDI printer, which did not work with LPR.

[VictorL]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7 CR4 by Oleg
Mode: RAW

Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet HP1320 (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable

[chw]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7
Connection: USB
Mode: LPR

Device
Brandname: Samsung
Brandtype: CLP-500 Color Laser Printer
URL To manufacturer:
http://www.samsung.com
URL To Product:
http://www.samsung.com/download/Mode...00&filetype=UM

Tested with LPR as suggested by ASUS current printer setup document, works fine.

[jmedved]

Tested: WORKING!
Model: WL-500g
Firmware: 1.9.4.0
Mode: LPRServer

Device
Brandname: HP (Hewlett Packard)
Brandtype: Laserjet 5P (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable

[joaormf]

HP Officejet T65
Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9
Mode: RAW

Device
Brandname: HP (Hewlett Packard)
Brandtype: Officejet T65 (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable

Only printing... since no bidirecionally there is no scanning, semi-automatic double-sided printing, etc...

[ml0815]

Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9


Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 980cxi (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable

Bidirectional connection works.

[gijs]

Tested: WORKING!
Model: WL-500gx
Firmware: 1.9.2.7
Connection: USB
Mode: LPR

Device
Brandname: Canon
Brandtype: Canon Pixma iP1500
URL To manufacturer:
http://www.canon-europe.com
URL To Product:
http://www.canon-europe.com/For_Home...PageID=26389#1

No particularities; Canon provided driver and Asus guide do the job.

[anarco]

Tested: WORKING
Model: WL-500g
Firmware: 1.7.5.6

Device
Brandname: EPSON
Brandtype: Stylus Color 800
Parallel port: YES
URL To manufacturer: http://www.epson.com
URL To product: couldn't find it (outdated)

Make sure to use LPR instead of RAW and give the loop some name, the same should work with the 850 as it is almost the same.