Reply With QuoteAdjust your wireless security settings. Use WEP or WPA-PSK with TKIP only.
Junior Member
I got Firmware v1.9.2.7. I don`t get a ip from the DHCP (WL-500g), get a automatic ip is on (win xp pro). My home network is 1 pc wired en and 1 wireless. The wireless one don`t get a ip. Who can help me
TinChin
Administrator
Adjust your wireless security settings. Use WEP or WPA-PSK with TKIP only.
Junior Member
ok I will try. Thanks
TinChin
Junior Member
Still haven`t a ip-adress
TinChin
Administrator
assign static, if it won't work check keys and stuff
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Junior Member
Have try static ip with no security, still can`t acces the network. I try almost everything but nothing will help
TinChin
Financial forum supporters :)
Firewalls active on your workstation (XP SP2) or router?
Brubber
WL-500g, WL-138g, WL-160g
Junior Member
Both at non-active, have xp sp1.
TinChin
Administrator
update your router to latest firmware,
reset router to defaults
please upgrade wireless card drivers if possible (remove driver first before upgrading)
try again with no modifications to your router configuration
and please use Windows Zero Configuration
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Junior Member
That don`t work. Can it be the WL-138g (pci card) the problem is? I read reviews about isn`t so good.
TinChin
Junior Member
Hi,
I experienced the same problem since I upgraded from firmware 1.9.2.7-1 to 1.9.2.7-3a. Tried all I could think of, but when I went back to 1.9.2.7-1, all worked fine again. Maybe you should try an that as well.
Good luck!!!
Peter
Administrator
and indeed please also try another card as you are using wl-138g thing
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Senior Member
to tinchin
I experienced the same problem since I upgraded from firmware 1.8.2.4 to 1.9.2.7-3a (1.9.2.7-3b)
Look at (http://wl500g.info/showthread.php?t=1505)
I think problem i this:
1.9.2.7-1 (2004-12-17) WPA2 & WME disabled for now
1.9.2.7-2 (2004-12-26) WPA2 & WME enabled, but WPA is not fully functional
If you need 1.9.2.7-3* use WEP-128bit (it should be noteâ - 60 sec!!!!!!!!!!! to get IP from DHCP)
or downgrade to 1.9.2.7-1 (1.8.2.4)
Last edited by MAV; 17-01-2005 at 08:33.
Junior Member
Thanks everyone!
Got it fixed now. I've just changed the encryption to 64-bits and thus gained 4 new WEP-keys, copied them to the encryption settings of the other pc and works fine. And update firmware to 1.9.2.7-3b.
TinChin
Last edited by tinchin; 18-01-2005 at 14:39.
Posting Permissions