Hi,

I tried to install X-Wrt. With 32MB it works.

With 128MB Ram it doesn't start. I enabled 128MB Ram with
Code:
nvram set sdram_init=0x0011
nvram set sdram_config=0x0062
nvram commit
reboot
CFE_Output_X-Wrt_128MB:
Code:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)                               
init started:
Build Date: ¥| 10¤ë 12 22:21:19 CST 2006 (root@localhost.localdomain)                                                               
BusyB
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.                                                       

et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 134217728 KBytes

Total memory used by CFE:  0x80800000 - 0x8089AF40 (634688)
Initialized Data:          0x808313D0 - 0x80833790 (9152)
BSS Area:                  0x80833790 - 0x80834F40 (6064)
Local Heap:                0x80834F40 - 0x80898F40 (409600)
Stack Area:                0x80898F40 - 0x8089AF40 (8192)
Text (code) segment:       0x80800000 - 0x808313D0 (201680)
Boot area (physical):      0x0089B000 - 0x008DB000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-1B-FC-57-AB-6E, ipaddr 192.168.178.1, mask 255.255.255.0

        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3704 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Any ideas?

Thx
Trucki