HP LaserJet 1000/1005/1020 not working: sort of solution

[GJAman]

Well, you've to store the firmware on the usb stick/drive connected to the wl500g and load it in the post-mount. The drawback, is that firmware should be reloaded if you've turn your printer off at some point.

I now have the firmware on the usb stick (after connecting a usb hub to my router). And added the line "tmp/harddisk/etc/hp1020/start_hp1020" (wich contains the line "/tmp/harddisk/etc/hp1020/usb_printerid /dev/usb/lp0 | grep -q FWVER || cat /tmp/harddisk/etc/hp1020/sihp1020.dl > /dev/usb/lp0") to "/usr/local/sbin/post-mount"

But this doesn't work.

When i run "/usr/local/sbin/post-mount" after the router has booted the printer reacts (always tested after off/on switching of the printer)