Printing problem

[brubber]

You may try the following way:

Printer Properties, Details Tab, queue or port properties, select print directly to printer, disable all queuing (On WXp this will probably be on the "Advanced" tab). If this doesn't work you may also try:

1: Install printer to local (USB) port
2: Set up LPRServer printing port (see Asus manual or this forum), be careful to set this up correctly!
3: Attach printer to WL-500g
4: Change printer port to LPRServer
5: Printer Properties, Details Tab, queue or port properties, select print directly to printer.

You will need a firmware which supports LPR printing, you should be able to find out on this forum which one will do (probably the original firmware that came with your WL-500g will do)

Good luck