Problem with 1.9.2.7-8-pre9

[xgrey]

Hello,

I have two problems after upgrade do oleg new beta firmware:

1. Can not connect to the router (wireless) when WPA-PSK encryptions is selected. With no encryption, or WEP everything is ok.
2. Router cannot acquire IP from my my ISP (cable modem), in Connection Status is always Disconnected.

Is there bug in this firmware, or i`m doing something wrong ?

Ps. sorry for my english

[MShell]

Hello,

I have two problems after upgrade do oleg new beta firmware:

1. Can not connect to the router (wireless) when WPA-PSK encryptions is selected. With no encryption, or WEP everything is ok.
2. Router cannot acquire IP from my my ISP (cable modem), in Connection Status is always Disconnected.

Is there bug in this firmware, or i`m doing something wrong ?

Ps. sorry for my english

1. Connecting through wireless works perfectly with WPA-PSK (encryption set to AES)
2. No problem getting an ip from dhcp server.

My guess would be that you're doing something wrong

[Madmess]

DHCP server don't send IPs by wireless... by LAN sending fine...
why?

[alien433]

maybe your doing something wrong, my router is sending ip adresses by wireless also.

[sponsor79]

Sometimes when you are trying to connect to AP you wouldn't receive IP address becouse you type wrong password in security settings. It seems then to be connected, but doesn't receive IP...

Did you procees to default settings after firmware upgrade?? I think it's important... You can also try to change WPA-PSK passkey

[Madmess]

Permormance
40MHz

With this settings DHCP work. thx.

[nOBeLium]

Does this custom version include the improved printer daemon Oleg's uses? (the JetDirect one).

[alien433]

i don't know what hp is using for something but if you do an search on the forum, you will find what you are looking for.

[Pulver]

2. Router cannot acquire IP from my my ISP (cable modem), in Connection Status is always Disconnected.

Im having the same problem.

With original Asus firmware I get an IP from my provider but with Oleg 1.9.2.7-8 (both pre 6 and pre9) - I do not get an IP.

WAN connection type is set to "Automatic IP"

It not doing something wrong - i have been using WL500GP with Oleg firmware for some time now (using both routers now)

[moeper]

thx to Oleg for his work, I tried pre10 and now pre15...pre10 has had some problems, sometimes the wlan connection didn´t recive any more packages, I hope this is now better with pre15.

[punhal]

Hi,

I already installed all the firmwares, the last was 1.9.2.7-8-pre16. And I cannot to write in my hard disk. Why?
Anyone can help me?

Thanks,

Punhal

[moeper]

Samba rights setting ok?

[punhal]

Hi...

yes

Punhal