Hello,
I have two problems after upgrade do oleg new beta firmware:
1. Can not connect to the router (wireless) when WPA-PSK encryptions is selected. With no encryption, or WEP everything is ok.
2. Router cannot acquire IP from my my ISP (cable modem), in Connection Status is always Disconnected.
Is there bug in this firmware, or i`m doing something wrong ?
Ps. sorry for my english
DHCP server don't send IPs by wireless... by LAN sending fine...
why?
maybe your doing something wrong, my router is sending ip adresses by wireless also.
Sometimes when you are trying to connect to AP you wouldn't receive IP address becouse you type wrong password in security settings. It seems then to be connected, but doesn't receive IP...
Did you procees to default settings after firmware upgrade?? I think it's important... You can also try to change WPA-PSK passkey
Last edited by sponsor79; 02-07-2007 at 06:54.
Permormance
40MHz
With this settings DHCP work. thx.
Where can i get this oleg-firmware for the wl-500w?
Thanx, up and running now, finally....
Wireless connect will only work with wireless mode set to '54G LRS'. Other settings will not work on a Intel 2200BG, W2k SP4 and the intel utility (v 9.0.4.0). Failes to get an IP: at first looks like connection is ok, but than an error on the 'get an ip automatically' (on the local site).
Wired no problems. Router is up and running now connected to UPC. Unfortunately the motion detection is still not working with a logitech quickcam pro 4000. Picture over the web is ok (640x480). Keeps trying to send with no motion to detect....
Does this custom version include the improved printer daemon Oleg's uses? (the JetDirect one).
i don't know what hp is using for something but if you do an search on the forum, you will find what you are looking for.
Im having the same problem.
With original Asus firmware I get an IP from my provider but with Oleg 1.9.2.7-8 (both pre 6 and pre9) - I do not get an IP.
WAN connection type is set to "Automatic IP"
It not doing something wrong - i have been using WL500GP with Oleg firmware for some time now (using both routers now)
thx to Oleg for his work, I tried pre10 and now pre15...pre10 has had some problems, sometimes the wlan connection didn´t recive any more packages, I hope this is now better with pre15.
Hi,
I already installed all the firmwares, the last was 1.9.2.7-8-pre16. And I cannot to write in my hard disk. Why?
Anyone can help me?
Thanks,
Punhal
Samba rights setting ok?