Now! WPA Secure Mode work in WDS Bride connention mode.
USE THIS FIRMWARE AT YOUR OWN RISK!
Firmware for the WL-300g can be found here:
http://www.asus.com/pub/ASUS/wireles..._WL300g_EN.zip
http://www.asus.com.tw/pub/ASUS/wire..._WL300g_EN.zip
ftp://ftp.asus.com.tw/pub/ASUS/wirel..._WL300g_EN.zip
http://www.asuscom.de/pub/ASUS/wirel..._WL300g_EN.zip
http://www.asus.it/pub/ASUS/wireless..._WL300g_EN.zip
ftp://www.asus.it/pub/ASUS/wireless/..._WL300g_EN.zip
Changelog:
currently not known
important!!
When upgrading from 1.7.x.x based firmware: you MUST Reset your WL300g to defaults via the restore button at the back when the power is already on after upgrading to this firmware!
you do not have to do this when you upgrade from 1.8.x.x based firmware!
but it is suggested when you encounter problems
Do not import saved settings from older/other firmwares! this can cause unstability to your device
Last edited by Antiloop; 04-10-2004 at 23:00.
Now! WPA Secure Mode work in WDS Bride connention mode.
posted link does not work anymore ... :-(
does anybody have a link that works ???
edit : oh wait, it works now !! don't know what happened, but i'm downloading.
thanks !!
wonder why they didn't put it on their regular wl-300g page ??
http://www.asus.com.tw/support/downl...elName=WL-300G
Last edited by Goner; 04-10-2004 at 14:28.
anybody else tried this one ??
i had to reset the AP to it's defaults because i couldn't log in as 'admin' anymore. not with the password i set and not with the default password ... so i had to set it up again completely ; WEP, MAC-filter etc.
and it thinks it's Jan 1 1970 ... ('date -s' command doesn't seem to work).
How and where send "data -s" command?Originally Posted by Goner
use : http://<ip-address>/Main_AdmStatus_Content.aspOriginally Posted by Viper_Rus
you can then give Linux commands - this was first used for the WL-300g power-hack.
edit : use 'date 100622522004' (mmddhhmmccyy) to set date/time to 6 oct 2004 22:52
Last edited by Goner; 06-10-2004 at 21:53.
Under Status & Log / Wireless, there is a new option "radio control", which can be enabled or disabled. Anyone knows what this does?
yeahOriginally Posted by CanterwoodBoy
it enables or disables your radio(thus your wireless)
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
This was already present in 1.6.5.3, the manual on the CD that came with your router will tell you what it's doingOriginally Posted by CanterwoodBoy
Brubber
WL-500g, WL-138g, WL-160g
Is the WL330G also supported with this firmware ?
no certainly notOriginally Posted by Lionking
AFAIK it is not linux based at this moment.. and perhaps never will be
if someone wants to sponsor me a WL330g i'll see if there is potentional to add a forum for it
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO