Model: WL-500g
Firmware: 1.8.1.9
Device:
Brand and Model: HP Deskjet 340
URL To manufacturer: http://www.hp.com
Works just fine.
Tested: WORKING
Model: WL-500g
Firmware: 1.6.5.3
Device
Brandname: EPSON
Brandtype: Stylus Color 740
Parallel port: YES
URL To manufacturer: http://www.epson.com
URL To product: http://www.epson.com
Model: WL-500g
Firmware: 1.8.1.9
Device:
Brand and Model: HP Deskjet 340
URL To manufacturer: http://www.hp.com
Works just fine.
Model: WL-500g
Firmware: 1.9.2.7
Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet 1200 Series
URL To manufacturer: http://www.hp.com
Configuration:
USB
Protocol: RAW !!!
Laut Anleitung für die Druckerinstallation ist bei der Erstellung eines neuen Anschlusses LPR (protocol) angegeben, hier ist RAW einzustellen
Model: WL-500g
Firmware: 1.9.2.7-3b
Device:
Brand and Model: HP DeskJet 870Cxi
URL To manufacturer: http://www.hp.com
No problems, works great.
Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9 (ASUS), 1.9.2.7-3c (Oleg), 1.9.2.7-6c (Oleg)
Connection: Parallel (LPT) with LPR or W2K and WinXP, Parallel (RAW) with 1.9.2.7-6c (Oleg)
Device
Brandname: EPSON
Brandtype: Stylus Color 760
URL To manufacturer: http://www.epson.com
URL To product: http://www.epson.com/cgi-bin/Store/P...oType=Overview
Note: The ink status is not shown in properties, but that is no problem for me. Update: No Ink Status also with Bidirec ON in RAW mode
Last edited by joe_heaven; 03-09-2005 at 06:46.
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4
Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet 1010
URL To manufacturer: http://www.hp.com
Tested with Raw Printing, works fine, HUB compatible.
I notice periodic, very short motor starts of the printer, seems to becaused by the id request of the Router or so. I dont know if this harms the printer over longer time.
My Stuff: WL-500g, Mapower H31x 10GB HD, Philips Webcam Vesta PRO, TerraTec Webcam PRO, USB Hub
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-3c (Oleg)
Connection: Parallel (LPT) RAW poortnummer 9101
Device
Brandname: HP
Brandtype: 950c
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7-CR4
Connection: Parallel
Mode: RAW
Device
Brandname: OKI (OKIDATA CORP)
Brandtype: Okipage 8iM
URL To manufacturer: http://www.oki.com
Tested with Raw Printing, port 9101, works fine.
This is a GDI printer, which did not work with LPR.
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7 CR4 by Oleg
Mode: RAW
Device
Brandname: HP (Hewlett Packard)
Brandtype: LaserJet HP1320 (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.2.7
Connection: USB
Mode: LPR
Device
Brandname: Samsung
Brandtype: CLP-500 Color Laser Printer
URL To manufacturer:
http://www.samsung.com
URL To Product:
http://www.samsung.com/download/Mode...00&filetype=UM
Tested with LPR as suggested by ASUS current printer setup document, works fine.
Tested: WORKING!
Model: WL-500g
Firmware: 1.9.4.0
Mode: LPRServer
Device
Brandname: HP (Hewlett Packard)
Brandtype: Laserjet 5P (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable
HP Officejet T65
Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9
Mode: RAW
Device
Brandname: HP (Hewlett Packard)
Brandtype: Officejet T65 (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable
Only printing... since no bidirecionally there is no scanning, semi-automatic double-sided printing, etc...
Tested: WORKING!
Model: WL-500g
Firmware: 1.8.1.9
Device
Brandname: HP (Hewlett Packard)
Brandtype: Deskjet 980cxi (Parallel)
URL To manufacturer: http://www.hp.com
URL To product: not applicable
Bidirectional connection works.
Tested: WORKING!
Model: WL-500gx
Firmware: 1.9.2.7
Connection: USB
Mode: LPR
Device
Brandname: Canon
Brandtype: Canon Pixma iP1500
URL To manufacturer:
http://www.canon-europe.com
URL To Product:
http://www.canon-europe.com/For_Home...PageID=26389#1
No particularities; Canon provided driver and Asus guide do the job.
Tested: WORKING
Model: WL-500g
Firmware: 1.7.5.6
Device
Brandname: EPSON
Brandtype: Stylus Color 800
Parallel port: YES
URL To manufacturer: http://www.epson.com
URL To product: couldn't find it (outdated)
Make sure to use LPR instead of RAW and give the loop some name, the same should work with the 850 as it is almost the same.