Ïåðåäîâîé îïûò ïîäêëþ÷åíèÿ äèñïëååâ ;-)

[TVadim]

Äàíî:
- ASUS WL-500-g Premium
- Ñàìîñòîÿòåëüíî ñîçäàííûé ïðåîáðàçîâàòåëü ttl 3.3V - rs-232 äëÿ âíóòðåííèõ ïîñëåäîâàòåëüíûõ ïîðòîâ;
- Palm -M500.

 Palm: ïðîãðàììà ýìóëÿöèè À/Ö äèñïëåÿ 4 ñòðîêè íà 20 ñèìâîëîâ:
http://palmorb.sourceforge.net/

È â ìàðøðóòèçàòîðå ïàêåòîì http://ipkg.nslu2-linux.org/feeds/op...6-1_mipsel.ipk ñ ìåëêèìè ïîïðàâêàìè êîìïèëèðîâàí ïàêåò:
lcdproc: http://lcdproc.omnipotent.net/.

Ðàáîòàåò, ôîòî:

[Duke]

Òåïåðü áû I2c ñýìóëèòü ÷åðåç ñâîáîäíûå íîãè Gpio - è ÿ ïåðâûé ðàçáåðó ñòàðóøêó 3210 è âðåæó åå ýêðàí â àñóñ :d
À òàê ïðîùå äåâàéñ â êîíñîëü ñóíóòü. Ñ ïîêåòîì ÿ òàêîå ïðîäåëûâàë

[TVadim]

Òåïåðü áû I2c ñýìóëèòü ÷åðåç ñâîáîäíûå íîãè Gpio - è ÿ ïåðâûé ðàçáåðó ñòàðóøêó 3210 è âðåæó åå ýêðàí â àñóñ :d
À òàê ïðîùå äåâàéñ â êîíñîëü ñóíóòü. Ñ ïîêåòîì ÿ òàêîå ïðîäåëûâàë

Êîíñîëü òîæå ðàáîòàåò, òîëüêî øðèôò ìåëêèé

[Danya0w]

ïî÷òè âñòðîèòü âèíìîáàéë â äèñïëåé è ïîëó÷èòñÿ ÊÏÊ =)
à èäåÿ ìíå ïîíðàâèëàñü)
õî÷ó ïîïðîáîâàòü êïêøêó ïîäêëþ÷èòü ê ðîóòåðó, ó íåãî âñåðàâíî îòñóòñâóþò õàðä êíîïêè è ðàçáèò òà÷, íî äèñïëåé æèâîé.
ïðåäïîëîæèì ÿ íàéäó ó êîììóíèêàòîðà com-port äëÿ åãî óïðàâëåíèÿ, êàê åãî ñêîííåêòèòü ñ ðîóòåðîì?
çäîðîâî áûëî áû ïîäêëþ÷èòü äëÿ äâóõ-ñòîðîííåãî óïðàâëåíèÿ ðîóòåðîì ñ êïê è êïê ñ ðîóòåðà =)

[Omega]

HowTo: Use Palm as 500gP LCD



SOURCE/MERITS
AVEN: (http://aven138.blogspot.com/2008/11/...x-palmorb.html)

ASUMPTIONS

.- Oleg firmware 1.9.2.7-10
.- Serial to USB adapter with chipset Prolific 2303
.- Palm Pilot IIIxe
.- usbutils ipkg package installed

HOW-TO

(1) Install PalmOrb (http://palmorb.sourceforge.net/) on your Palm Pilot

(2) Plug the serial-to-usb adapter directly to a USB port on the router.
(NOT to an external USB Hub connected to the router!)

Run the following command to confirm the router detects the usb-serial adapter

$ lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 003: ID 1970:0000
Bus 001 Device 004: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter

Line showing "Prolific Technology, Inc. PL2303 Serial Port" confirm everything is Ok to proceed with next steps.

(3) Install LCD manager package:

ipkg install lcd4linux

(4) Install serial managers:

insmod usbserial
insmod pl2303

(5) Create configuration file for LCD manager:

nano /opt/etc/lcd4linux.conf

(6) Paste the following text:

Display PalmOrb {
Driver 'MatrixOrbital'
Model 'LK204-25'
Port '/dev/usb/tts/0'
Speed 19200
Icons 1
}

Widget OS {
class 'Text'
expression '*** '.uname('sysname').' '.uname('release').' ***'
width 20
align 'M'
speed 100
update tick
}

Widget CPU {
class 'Text'
expression uname('machine')
prefix 'CPU '
width 9
align 'L'
update tick
}


Widget RAM {
class 'Text'
expression meminfo('MemTotal')/1024
postfix ' MB RAM'
width 11
precision 0
align 'R'
update tick
}

Widget Busy {
class 'Text'
expression proc_stat::cpu('busy', 500)
prefix 'Busy'
postfix '%'
width 10
precision 1
align 'R'Widget Eth0 {
class 'Text'
expression (netdev('eth0', 'Rx_bytes', 500)+netdev('eth0', 'Tx_bytes', 500))/1024
prefix 'eth0'
postfix ' '
width 10
precision 0
align 'R'
update tick
}

Widget Eth0Bar {
class 'Bar'
expression netdev('eth0', 'Rx_bytes', 500)
expression2 netdev('eth0', 'Tx_bytes', 500)
length 14
direction 'E'
update tack
}

Layout Default {
Row1 {
Col1 'OS'
}
Row2 {
Col1 'CPU'
Col10 'RAM'
}
Row3 {
Col1 'Busy'
Col11 'BusyBar'
}
Row4 {
Col1 'Eth0'
Col11 'Eth0Bar'
}
}

Display 'PalmOrb'

Layout 'Default'

Variables {
tick 500
tack 100
}

update tick
}

Widget BusyBar {
class 'Bar'
expression proc_stat::cpu('busy', 500)
expression2 proc_stat::cpu('system', 500)
length 10
direction 'E'
update tack
}

(7) Change access rights to the configuration file:

chmod 600 /opt/etc/lcd4linux.conf

(8) Start deamon:

lcd4linux -f /opt/etc/lcd4linux.conf

http://wl500g.info/showthread.php?t=18341

êàê åãî ñêîííåêòèòü ñ ðîóòåðîì ?

Íó íàâåðíî ñ ïîìîùüþ êàáåëÿ ...
À çà÷åì òÿíóòü ê íåìó ëèøíèå ïðîâîäà ?
Ñ ÊÏÊ/PSP ëó÷øå óïðàâëÿòü ïî IRDA/Wi-Fi ...

Ç.Û. Êñòàòè, òàì âìåñòå ñ äèñïëååì ê ðîóòåðó
åù¸ è usb-êëàâèàòóðó âäîáàâîê ïðèêðóòèëè ...

[Danya0w]

Íó íàâåðíî ñ ïîìîùüþ êàáåëÿ ...
À çà÷åì òÿíóòü ê íåìó ëèøíèå ïðîâîäà ?
Ñ ÊÏÊ/PSP ëó÷øå óïðàâëÿòü ïî IRDA/Wi-Fi ...

ÿ ïðî èñïîëüçîâàíèå äèñïëåÿ, ïîäêëþ÷èâ ÷åðåç þçá õåðîâàòî áóäåò íàáëþäàòü îòëàäî÷íóþ èíôó, ââîä ñèìâîëîâ ñ êëàâû è òï. ñ òåì æå óñïåõîì êîìï åãî çàìåíÿåò ñîîòâåòñòâóþùèì ñîôòîì)

[Omega]

ïî÷òè âñòðîèòü âèíìîáàéë â äèñïëåé è ïîëó÷èòñÿ ÊÏÊ =) à èäåÿ ìíå ïîíðàâèëàñü)
õî÷ó ïîïðîáîâàòü êïêøêó ïîäêëþ÷èòü ê ðîóòåðó, ó íåãî âñåðàâíî îòñóòñâóþò õàðä êíîïêè è ðàçáèò òà÷, íî äèñïëåé æèâîé.
ïðåäïîëîæèì ÿ íàéäó ó êîììóíèêàòîðà com-port äëÿ åãî óïðàâëåíèÿ, êàê åãî ñêîííåêòèòü ñ ðîóòåðîì?
çäîðîâî áûëî áû ïîäêëþ÷èòü äëÿ äâóõ-ñòîðîííåãî óïðàâëåíèÿ ðîóòåðîì ñ êïê è êïê ñ ðîóòåðà =)

WL-500gP ñ ÆÊ-äèñïëååì - lcd4linux + PalmOrb

PalmOrb V1.1a4 : http://palmorb.sourceforge.net/

http://sourceforge.net/project/showf...ackage_id=2968



http://ssl.bulix.org/projects/lcd4linux/
http://digiland.tw/viewtopic.php?id=466