Sollie, you could also use optware to install a new ftp server and use that instead of the one included with the ASUS firmware.
Kfurge,
I need your help. Can you add the following lines into /etc/vsftpd.conf:
I hope this will enable pasv support into the wl-700ge. Which mean, windows xp's explorer can view the content.Code:pasv_enable=YES pasv_min_port=65000 pasv_max_port=65535
Sollie.
Sollie, you could also use optware to install a new ftp server and use that instead of the one included with the ASUS firmware.
I like to use the webinterface
So i thought to use the default one.
Sollie.
No problem. At a minimum I can re-route the conf file through /tmp allowing it to be redirected elsewhere at startup.
- K.C.
K, thank you. Let me know if i can test something.
Sollie.
Do this:
Step1: Copy vsftpf conf
"cp /etc/vsftpd.conf /opt/etc"
Step 2: add pasv-mode support to vsftpd.conf
"nano /opt/etc/vsftpd.conf"
Add the following lines to the end of this file:
pasv_enable=YES
pasv_min_port=65000
pasv_max_port=65535
pasv_address=85.145.44.81
(WAN-ip)
Step 3: (re)start vsftpd with the new vsftpd.conf file at boot. Add the following lines to your rc.local file:
#Enable pasv-mode for vsftpd
killall vsftpd
/sbin/vsftpd /opt/etc/vsftpd.conf &
Thats all.
Sollie.
PS: the WAN-ip setting in vsftp.conf breaks pasv-mode support for local users.