Upgrade samba to Version 3

[sivan_ms]

Hi
I have a Wl-500GP oleg pre7 and followd the howto-s but they dont work with SAMBA as they says . ( i have samba running but i get just secound partitionhdd in my share )
what i tried to upgrade to samba 3 by using ipkg but it dosnt run , samba 2 is still running , i seted it off from web interface and now i have no samaba ! re enabling it means v2 again.
any way to run v3
if i have to use v2 , do you know a good howto ! there is no one for v2.2.x on samba.org
thanks

[sivan_ms]

i have made the 2 v working and maybe will uppgrade later to 3 but , any help i GOOD

[Hellish]

I upgraded today to samba 3, but I got a segmentation fault when starting both smbd and nmbd. So its back to v2 :-(

[charming]

I found on some webboard (sorry I can't remember)
He say if you don't want to face "segmentation fault".
You will install samba3.0.23c-4 instead of samba3

ipkg install samba3-0.23c-4

But I have not try yet.

[Hellish]

Thanx for your reply. I will give it a try sometime this weekend. I'll post a feedback if it helped.

[Kunairu]

for me Works 3.0.23b-1 fine, after install you have to link some files, to newer versions like liblber.so i reinstall today, i can make a little script for it

[Gart]

for me Works 3.0.23b-1 fine, after install you have to link some files, to newer versions like liblber.so i reinstall today, i can make a little script for it

Could you please provide any information on how to get Samba3 running with Oleg's firmware? I tried to install it from the new repository, but no luck. Please help.

[oleo]

samba3 is broken. I'did not managed to find time for it.

[Kunairu]

the newest version 3.0.25b-1 works fine. you must have smbpasswd -a admin ... or other user to work.


Here is my smb.conf

[global]
domain master = no
local master = no
preferred master = no
os level = 0
workgroup = ARBEITSGRUPPE
netbios name = ROUTER
hosts allow = 192.168.1.
read only = no
browsable = yes
security = user
socket options = TCP_NODELAY IPTOS_LOWDELAY

[share2]
path = /tmp/harddisk
writeable = yes
force user = admin

[share]
path = /tmp/harddisk2
force user = admin
writeable = yes

i hope it would be helpful

[Hellish]

the newest version 3.0.25b-1 works fine. you must have smbpasswd -a admin ... or other user to work.


Here is my smb.conf




i hope it would be helpful

Thank you Kunariu, will try this later today.