Oleg, thanks a lot for the new version! I have just tested it with my Creative Labs WebCam 3. It seems the behaviour is the same as I described couple months ago. The problem with WebCam initialization during reboot still persists.Originally posted by Oleg
Guys, I've prepared the new firmware version. WebCam stuff not tested, so please check it and let me know if something wrong with it.
...
...
br0: topology change detected, propagating
lp0: using parport0 (polling).
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
usb-ohci.c: usb-00:04.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
Linux video capture interface: v1.00
hub.c: new USB device 00:04.0-1, assigned address 2
usb.c: USB device not accepting new address=2 (error=-145)
hub.c: new USB device 00:04.0-1, assigned address 3
usb.c: USB device not accepting new address=3 (error=-145)
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
lp driver: get device ID
neg fail
Register User Space Key Handler : 436 0
# WebCam disconnected and plugged again to router:
hub.c: new USB device 00:04.0-1, assigned address 4
usb.c: USB device 4 (vend/prod 0x5a9/0x511) is not claimed by any active driver.
i2c-core.o: i2c core module
usb.c: registered new driver ov511
ov511.c: USB OV511 video device found
ov511.c: model: Creative Labs WebCam 3
ov511.c: Sensor is an OV7610
ov511.c: Device registered on minor 0
ov511.c: v1.61 for Linux 2.4 : ov511 USB Camera Driver
~ #
361 admin SW [khubd]
412 admin 416 S /sbin/lpd
413 admin 456 S /sbin/infosvr br0
416 admin 420 S /bin/sh /init/rc.watchdog ROUTER
436 admin 572 S /usr/sbin/watchdog 30 131.107.1.10 MEZ-1MESZ 0 0 0 0
452 admin 452 S -sh
514 admin 1684 R /usr/sbin/rcamd -m 100 -c 100 -f 640x480 -p 7777 -s 0
515 admin 1684 S /usr/sbin/rcamd -m 100 -c 100 -f 640x480 -p 7777 -s 0
516 admin 1684 S /usr/sbin/rcamd -m 100 -c 100 -f 640x480 -p 7777 -s 0
530 admin 312 R ps