Page 1 of 3 123 LastLast
Results 1 to 15 of 40

Thread: WL-500gP & WDS

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Exclamation WDS wl-500g and router/AP surecom

    Hello,

    I buy asus wl-500g and I want put wl-500g in client and repeter.

    I put in AP mode, select hybrid, put same ssid and channel in both.
    Also put mac address of router/ap surecom.



    but in PC5 and laptop can´t ping 192.168.1.3/4

    What I have wrong?

    Thanks
    Daniel

  2. #2
    Join Date
    Nov 2003
    Location
    Eindhoven
    Posts
    2,407
    perhaps firewalling?

    can you access the internet etc..?

    My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook



    WL500g Forum Asus Files OpenDir

    Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO

  3. #3
    Thanks for your reply.

    I can access internet in PC1 and PC2

    Laptop and PC3 have no access the internet or can´t make ping 192.168.1.3

    No firewalling.

    How can I know if hybrid is working?

  4. #4

    Bridge (or WDS) between different Asus models

    Hi there, does anyone know if it's possible to create a bridge between different Asus Acces Point models?
    I'm willing to create a bridge between a WL-300G and a WL-500G.
    I'm also interested in a bridge between a WL-520G and a WL-300G.
    Who knows if this is possible, please let me know. Thanks very much!

  5. #5
    Join Date
    Jun 2006
    Location
    Poprad, Slovakia
    Posts
    2

    WDS between ASUS 500g Deluxe and MSI GATEWAY 54Mbps

    Hi everybody!

    I have 2 APs ASUS 500gx & MSI RG54GS2, both support WDS, but when I set up them to the WDS bridge, they don´t work
    I really don´t know, where is a problem, I think both APs have the right setting for WDS..

    1. Asus WL500g Deluxe
    SSID: ANY2
    CH: 5
    Hybrid mode
    In remote bridge list MAC of the MSI (I ensure many times that it si correct one)
    Operation mode: Home gateway (I tried the router, and AP too without difference)
    No MAC control, or encryption security enabled..

    2. MSI RG54GS2

    SSID: ANY2
    CH: 5
    Gateway mode only
    In WDS list MAC of the ASUS WL500g Deluxe
    No MAC control, or encryption security enabled..

    Situation on my LAN should looks so:



    MSI RG54GS2----[wlan]-------Asus WL500g Deluxe--------[wlan]----MSI RG54GS2


    Before I bought Asus WL500g Deluxe, my LAN worked properly (2 APs MSI RG54GS2 in WDS bridge)
    I have tried 3. versions of FW for asus (WL500gx-1.9.2.7-7b, WL500gx_1950, WL500gx-1.9.2.7-7d.trx) no one works..

    In the status log of the MSI gateway is: "Disassociated: 00-15-F2-6A-E0-9E because RX deauth req".. 00-15-F2-6A-E0-9E is MAC of the ASUS, so that means, they see each other, but MSI won´t associated ASUS.. Maybe bad net topology?


    Thanks for all suggestions, I am a newbie in that..

  6. #6
    Join Date
    Feb 2005
    Location
    Germany - Frankfurt a.M.
    Posts
    299
    Quote Originally Posted by ysko
    1. Asus WL500g Deluxe
    SSID: ANY2
    CH: 5

    2. MSI RG54GS2
    SSID: ANY2
    CH: 5

    Maybe bad net topology?
    Hi,
    try to rename the asus device.
    i allways had diffenrent names for all WDS devices.
    WL-500gP => 1.9.2.7-7g (2007-04-06)
    Running: thttpd, php 5.1, vsftp, rrdtool

    http://onlinefussballmanager.de/userbar/0/53647.png

  7. #7
    Join Date
    Jun 2006
    Location
    Poprad, Slovakia
    Posts
    2

    Hi Britnet,

    Thanks for your suggestion,

    You mean change the SSID? I tried to change many options on my asus device, include different SSID & LAN IP address without result Always the same answer of the MSI Gateway system log : "Disassociated: 00-15-F2-6A-E0-9E because RX deauth req"

    It is possible, that these two devices are incompatible? But I don´t think so..

  8. #8
    Join Date
    Aug 2006
    Location
    Birmingham, UK
    Posts
    5

    WL-500gP & WDS

    Hi all, got some noob questions!!

    I've tried without success (over abour 6 hours, including about 2 hours trawling this forum) to extend my already present WLAN based around a KCORP 575 Gold to my new WL-500gP, having similar problems to others where it seems the ports are not all in the same bridge as the "Operation Mode" option claims! They are both in the same subnet, same SSID, etc but from the PC connected to the KCORP I can't ping a device on the ASUS, or ping the ASUS itself.

    My question is, if I replaced the KCORP wirless router with a 2nd 500gP, would that make things a lot easier and stop me pulling my hair out?!

    I know a diagram always helps, so here's what I have at the moment and what I think might be easier with a 2nd ASUS!!

    If anyone has any ideas on whether this is a potentially good plan, or any other ideas, I'd most appreciate it!

    Thanks in advance!
    Jamoi
    Attached Images Attached Images  

  9. #9
    It might be a stupid proposal, since I don't know your physical setup (i.e. what distances you want to cover):

    Why don't you just connect the HD to the wl500gP and get rid of the KCORP device?

  10. #10
    Join Date
    Aug 2006
    Location
    Birmingham, UK
    Posts
    5
    Hi elaerion,

    Sorry, I should have mentioned that bit! The whole point of this is that my ethernet modem and 2nd access point are on different floors, an I don't want to drag wires from the ground to the 1st floor!

    Cheers, J

  11. #11
    Hi,

    afaik wl-500g premium can only act as a access point and can not be used to extend current wlan. So it will not help if you buy a new 500gp access point.

    please, correct me if Im wrong..

  12. #12

    WDS with WPA2 success!!!

    Hi,
    I connected two WL500gP in WDS with WPA2 encription. I read here about some problems wtih that.
    If its interesting, I'll write details here.
    Best regards to All.

  13. #13

    Smile

    Hi,

    yes i'm very interesting. Please send the details and outputs from this commands:
    # wl wsec
    # wl wpa_auth
    # nvram show (you can remove passwords, keys and macs)

    thanks
    Best regards

  14. #14
    Hi, tomekmik.
    You know, it is possible to connect two 500gp together in WDS with WPA. But it worked only next morning after i tried unsuccessfully all the evening. And it worked only< as i think, after switching them off from the power. So, when I switched them on in the morning, it suddenly worked. But...but when there was a very short power failure in my house few days later, they lost communication. I had to disable encription and enable it again, reboot them and then they worked again.
    But i definitely noticed, that also, when i switch off and back on a surge adapter, in which first 500gp and a cable modem (to which its connected) are plugged in, 500gp looses connection to the internet. So, i have to reboot it separately, and then it works.
    So, unfortunately, there is a dependence from power in two cases:
    1. connection between two 500gp with encription enabled,
    2. connection between a modem and a 500gp, connected to it.

    My firmware version is 1.9.6.9. Dont know, may be older firmware is more stable to power losses.
    Both routers are in default - gateway modes. On both i left DHCP server enabled. And each has its own SSID. But, i also tried another combination:
    first router in gateway mode with dhcp enabled. Second in AP mode without dhcp. And both had one SSID.
    In all cases, they are unstable.
    What you think?

  15. #15
    hi,

    i thought you are use the Oleg firmware.
    How do you force the routers to use WPA2 and not WPA?
    I'm use the version 1.9.2.7-7b but on wl-500g with WDS-WPA.
    In this version WPA and WPA2 is enabled but my routers use only WPA and not WPA2.
    Maybe you can try it with the Oleg firmware. I have only one WL-500gp for testing.
    On the Comman Line you can set WPA2-Mode with:
    # wl wpa_auth 128
    The default is 132=4+128=WPA+WPA2

Page 1 of 3 123 LastLast

Similar Threads

  1. WDS Problem bei Firmware 1.9.2.7 endlich gelöst
    By Wisi in forum German Discussion - Deutsch (DE)
    Replies: 70
    Last Post: 10-12-2009, 15:51

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •