You could reflash Olegs Firmware for example (if not for some reason you have samba installed on an external harddisk).
Hello,
How can I reset only samba settings, IPKG ? So SAMBA settings are removed and IPKG etc, etc is deleted? I already tried to push the reset button, but that only deletes the settings I made in the web interface. So, how can I restore SAMBA etc to default?
Thanks,
PcExpert
Last edited by MHz; 10-05-2006 at 13:27.
My Router Specs:
Model: ASUS WL500G Deluxe
Firmware Version: 1.9.2.7-7G (OLEG)
You could reflash Olegs Firmware for example (if not for some reason you have samba installed on an external harddisk).
Sorry for the late reaction, but what I exactly mean is: How to reset everything except the changes I made in the webinterface. Thanks
My Router Specs:
Model: ASUS WL500G Deluxe
Firmware Version: 1.9.2.7-7G (OLEG)
Save your settings from Webinterface (see "Settings Management" )before you reflash . Restore them afterwards. I recommend using the settings file only for the same firmware version, tho it MIGHT work on others.
So if I understand it fine then I have to save my settings by going to the settings management page then I have to push the reset button at the back of the router. And then I have to upload the settings I saved before the reset. Is that right?
Last edited by MHz; 21-05-2006 at 18:18.
My Router Specs:
Model: ASUS WL500G Deluxe
Firmware Version: 1.9.2.7-7G (OLEG)
Already Figured Out Howto Do That
Last edited by MHz; 22-05-2006 at 12:54.
My Router Specs:
Model: ASUS WL500G Deluxe
Firmware Version: 1.9.2.7-7G (OLEG)