Все переустановил.. но с браузера не посмотреть.... Кто знает почему !??
Code:
motion -n
[0] Processing thread 0 - config file /opt/etc/motion.conf
[0] Unknown config option "night_compensate"
[0] Unknown config option "minimum_gap"
[0] Unknown config option "low_cpu"
[0] Unknown config option "sql_log_image"
[0] Unknown config option "sql_log_snapshot"
[0] Unknown config option "sql_log_mpeg"
[0] Unknown config option "sql_log_timelapse"
[0] Unknown config option "sql_query"
[0] Motion 3.2.12 Started
[0] ffmpeg LIBAVCODEC_BUILD 3356160 LIBAVFORMAT_BUILD 3411200
[0] Thread 1 is from /opt/etc/motion.conf
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "UVC Camera (046d:081d)"
[1] cap.bus_info: "usb-0000:00:03.1-1.2"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Config palette index 8 (YU12) doesn't work.
[0] httpd bind(): Address already in use
[0] httpd thread exit
[1] Supported palettes:
[1] 0: YUYV (YUV 4:2:2 (YUYV))
[1] 1: MJPG (MJPEG)
[1] Selected palette YUYV
[1] Test palette YUYV (640x480)
[1] Using palette YUYV (640x480) bytesperlines 1280 sizeimage 614400 colorspace 00000008
[1] found control 0x00980900, "Brightness", range 0,255
[1] "Brightness", default 128, current 128
[1] found control 0x00980901, "Contrast", range 0,255
[1] "Contrast", default 32, current 32
[1] found control 0x00980902, "Saturation", range 0,255
[1] "Saturation", default 34, current 34
[1] found control 0x00980913, "Gain", range 0,255
[1] "Gain", default 64, current 64
[1] mmap information:
[1] frames=4
[1] 0 length=614400
[1] 1 length=614400
[1] 2 length=614400
[1] 3 length=614400
[1] Using V4L2
[1] Resizing pre_capture buffer to 1 items
[1] Started stream webcam server in port 7007
[1] Problem creating directory /volume1: Read-only file system
[1] ffopen_open error creating (new) file [/volume1/web/01-20111105012539.avi]: Read-only file system
[1] Thread exiting
[1] Calling vid_close() from motion_cleanup
[1] Closing video device /dev/video0
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "UVC Camera (046d:081d)"
[1] cap.bus_info: "usb-0000:00:03.1-1.2"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Config palette index 8 (YU12) doesn't work.
[1] Supported palettes:
[1] 0: YUYV (YUV 4:2:2 (YUYV))
[1] 1: MJPG (MJPEG)
[1] Selected palette YUYV
[1] Test palette YUYV (640x480)
[1] Using palette YUYV (640x480) bytesperlines 1280 sizeimage 614400 colorspace 00000008
[1] found control 0x00980900, "Brightness", range 0,255
[1] "Brightness", default 128, current 128
[1] found control 0x00980901, "Contrast", range 0,255
[1] "Contrast", default 32, current 32
[1] found control 0x00980902, "Saturation", range 0,255
[1] "Saturation", default 34, current 34
[1] found control 0x00980913, "Gain", range 0,255
[1] "Gain", default 64, current 64
[1] mmap information:
[1] frames=4
[1] 0 length=614400
[1] 1 length=614400
[1] 2 length=614400
[1] 3 length=614400
[1] Using V4L2
[1] Resizing pre_capture buffer to 1 items
[1] Started stream webcam server in port 7007
И ещё я так понял что этот моушен грузит роутер не по детски ))))
Камера начинает работать только после этой команды
Code:
insmod videodev
insmod input-core
insmod v4l2-common
insmod uvcvideo
Но и в добавок после неё нагрузка на роутер идет 100 % ппц как быть... походу без motion нужно как то обойтись .. и опустошить семейный бюджет на IP камеру . Хотя мне и видео то не нужно... надо просто выставить переодичность фоткания территори и отправка фоток на почту или дропбокс... Эх