running php on wl500g

[ronin]

Guys,

Can someone write a short introduction to help me get PHP running on my router. I'm not using the default httpd (just for admin gui) but I run busybox_httpd. Now i want to make it possible to run php.

please help me out!

RoNin

[Styno]

On the OpenWRT forum I found this:
http://davidoffdotnet.net/openwrt/ipkg/

There are the following packages which provide PHP for the Linksys WRT54g, so they might work on the WL-500g as well:

Package: lwhp
Version: 1.0.0
Section: net
Architecture: mipsel
Maintainer: sam <sam@davidoffdotnet.net>
MD5Sum: 96bd50f8625f94f54e62255456b3a683
Size: 143640
Filename: lwhp_1.0.0_mipsel.ipk
Source: http://davidoffdotnet.net/openwrt/ip...0.0_mipsel.ipk
Description: a lightweight hypertext processor


Package: thttpd-php
Version: 2.21b-2
Section: net
Architecture: mipsel
Maintainer: sam <sam@davidoffdotnet.net>
MD5Sum: b0660a8072d3c9bfd42a26fccf7571c4
Size: 402230
Filename: thttpd-php_2.21b-2_mipsel.ipk
Source: http://davidoffdotnet.net/openwrt/ip...b-2_mipsel.ipk
Description: The thttpd webserver compiled with php4 support.

The first seems to me a simple php library (I don't know what its features are).
The second package contains a webserver.

I hope this is helpful and, as allways, if it works for you please report back here

[Scoundrel]

I've tryed these packages, but after starting the php application died with 'Segmentation Fault' error. Can anybody write me how to make install these packages correctly? I'm newbie in LINUX :-(

My configuration is: ASUS WL-500GX, Firmware 1.9.2.7 RC2 (OLEG)

Please help me out.

SC

Packages: http://davidoffdotnet.net/openwrt/ipkg/

[Technik]

You have to replace the current firmware by OpenWRT if you wish to use OpenWRT packages. Read at least this thread: http://wl500g.info/showthread.php?t=...hlight=openwrt The firmware download link seems to be dead at the moment but it should be available soon.

[Styno]

Any possibilities on cross-comping these applications to Asus source tree?

[erik_bies]

I gave it a try and compiled these.

Here is PHP3 & thttpd (without PHP4). I'll give the thttpd+php4 combi another try later, but sofar that resulted in a long list of errors

For me it is working on 1.9.2.7-2 software.

Good luck