Ïîäêëþ÷àåì USB HDD ê ðîóòåðó

[lbs555]

íó... ó ìåíÿ "ãðàíàòà äðóãîé ñèñòåìû". ýòî äàííîñòü.

÷åðåç ftp ìåíÿ óñòðîèò, åñëè ìîæíî äîïèñûâàòü íåñóùåñòâóþùèå ôàéëû è ïåðåïèñûâàòü èçìåíåííûå. íî FAR (à ìîæåò è FTP-ñåðâåð, â ïðèíöèïå) òàê íå óìååò. ìîæåò åñòü äð. ïðîãðàììà?

âñÿ íàäåæäà íà íàëè÷èå íå èçâåñòíûõ ìíå "íå êðèâûõ" äðàéâåðîâ äëÿ R/W íà ext3 ðàçäëû ïîä XP/VISTA.

à êàê êñòàòè, ñäåëàòü òàê, ÷òîáû ftp-ñåðâåð êîííåêò íå ðâàë?

[setver]

Êóïèë WL500gP, ïðîøèâêà ïîñëåäíÿÿ îò Îëåãà. Ïîñòàâèë USB HDD. Èç XP äîñòóï ê \\wl500gp\share\ åñòü, âñ¸ îòëè÷íî ðàáîòàåò.

Ïðîáóþ ïîëó÷èòü äîñòóï ê âèíòó èç Mac OS X: smb://wl500gp/share/ - ïîëó÷àþ îêíî ñ ïðåäëîæåíèåì ââåñòè íàçâàíèå ðàáî÷åé ãðóïïû, ëîãèí è ïàðîëü.

Ðàáî÷óþ ãðóïïó óêàçàë, à êàêèå ëîãèí è ïàðîëü - íå ïîíèìàþ. Ïðîáîâàë óêàçûâàòü ó÷åòíóþ çàïèñü àäìèíà íà ðîóòåðå, ó÷åòíóþ çàïèñü ïîëüçîâàòåëÿ â Mac OS X, îñòàâëÿòü ïîëÿ ëîãèí è ïàðîëü ïóñòûìè - âñå ðàâíî âûäàåò îøèáêó: íåïðàâèëüíîå èìÿ ïîëüçîâàòåëÿ èëè ïàðîëü.

Ïîäñêàæèòå, â ÷åì ìîæåò áûòü îøèáêà?

[lbs555]

ïîïðîáóé admin áåç ïàðîëÿ.
ó ìåíÿ ñ íîóòà ïîä VISTA samba ëîãèíà/ïàðîëÿ íå ïðîñèò. ïîä XP ïðîñèò... à áàãà ýòî èëè ôè÷à - õ.ç.

Êóïèë WL500gP, ïðîøèâêà ïîñëåäíÿÿ îò Îëåãà. Ïîñòàâèë USB HDD. Èç XP äîñòóï ê \\wl500gp\share\ åñòü, âñ¸ îòëè÷íî ðàáîòàåò.

Ïðîáóþ ïîëó÷èòü äîñòóï ê âèíòó èç Mac OS X: smb://wl500gp/share/ - ïîëó÷àþ îêíî ñ ïðåäëîæåíèåì ââåñòè íàçâàíèå ðàáî÷åé ãðóïïû, ëîãèí è ïàðîëü.

Ðàáî÷óþ ãðóïïó óêàçàë, à êàêèå ëîãèí è ïàðîëü - íå ïîíèìàþ. Ïðîáîâàë óêàçûâàòü ó÷åòíóþ çàïèñü àäìèíà íà ðîóòåðå, ó÷åòíóþ çàïèñü ïîëüçîâàòåëÿ â Mac OS X, îñòàâëÿòü ïîëÿ ëîãèí è ïàðîëü ïóñòûìè - âñå ðàâíî âûäàåò îøèáêó: íåïðàâèëüíîå èìÿ ïîëüçîâàòåëÿ èëè ïàðîëü.

Ïîäñêàæèòå, â ÷åì ìîæåò áûòü îøèáêà?

[setver]

ïîïðîáóé admin áåç ïàðîëÿ.

Ïðîáîâàë - áåçðåçóëüòàòíî. Èìååò êàêîå-òî çíà÷åíèå, ÷òî íà ðîóòåðå íåò ïîëüçîâàòåëåé - òîëüêî àäìèí?

[parajumper]

Ïîäñêàæèòå, ÷òî ìîæåò ìåøàòü äèñêó ïîäêëþ÷èòüñÿ
Ëîã:
kernel: hub.c: new USB device 01:03.2-1, assigned address 28
kernel: usb.c: USB device not accepting new address=28 (error=-71)
Ìîæåò êòî çíàåò, ÷òî çà îøèáêà?
Åñòü ïîäîçðåíèå, ÷òî ïèòàíèÿ îò USB íå õâàòàåò (êàê-òî ñòðàííî ïîùåëêèâàåò)

[BuHT]

òàêàÿ æå ôèãíÿ ñëó÷àëàñü è ñëó÷àåòñÿ ðåäêî ïðàâäà. òîæå ãðåøó íà ïèòàíèå.
óæå è ïðîáîâàë ïðåçàãðóæàòü ìîäóëè scsi_mod sd_mod è usb-storage
ïîðîé ïîìîãàëî ðàçà ñ 2-3 ... ïîðîé ïîìîãàëî âêë è âûêë ïèòàíèÿ.. è ãîëîâàìè âèíò ïîñòóêèâàë.

âîò ïîäáèðàþ íîâûé ÁÏ äëÿ àñóñà

[KRandall]

À íå ïðîùå HDD âîò ñþäà âñòàâèòü? Íå î÷åíü äîðîãî è íèêàêèõ ïðîáëåì

[Antonio_99RUS]

Ó ìåíÿ äâà òàêèõ.  îáîèõ ñëó÷àÿõ ïðèøëîñü âûáðîñèòü "ðîäíîé" äåðüìîêóëåð è ïðèêîëõîçèòü íîðìàëüíûé, âî âòîðîì áîêñå ïðèøëîñü êðîìå ýòîãî îòðóáèòü ìåðçêóþ öâåòîìóçûêó.

[lbs555]

ó ìåíÿ ðàáîòàåò òàêàÿ õðåíü áåç ïàðîëÿ:
net use s: \\asuswl500gp\share$ /user:admin

Ïðîáîâàë - áåçðåçóëüòàòíî. Èìååò êàêîå-òî çíà÷åíèå, ÷òî íà ðîóòåðå íåò ïîëüçîâàòåëåé - òîëüêî àäìèí?

[BuHT]

KRandall, íó åñëè á íå áûëî ó ìåíÿ óæå òàêîãî:
òàêîãî è òðåõ õàðäîâ 2,5", òî ïðåäëîæåííûé âàðèàíò áûë áû ïðîùå


à ïî òåìå:
smppasswd -a admin
áûëî ñäåëàíî? ìîæåò òàê êà êíå ñîçäàí ôàéë ñ ñàìáîâñêèìè ïàðîëÿìè ïîòìó è íå ïóñêàåò.

[antua]

KRandall, íó åñëè á íå áûëî ó ìåíÿ óæå òàêîãî:
òàêîãî è òðåõ õàðäîâ 2,5", òî ïðåäëîæåííûé âàðèàíò áûë áû ïðîùå


à ïî òåìå:
smppasswd -a admin
áûëî ñäåëàíî? ìîæåò òàê êà êíå ñîçäàí ôàéë ñ ñàìáîâñêèìè ïàðîëÿìè ïîòìó è íå ïóñêàåò.

ñäåëàë òàê êàê âû ñêàçàëè ïîëó÷èëîñü ñëåäóþùåå:
[ash@wl500g root]$ smbpasswd -a ash
New SMB password:
Retype new SMB password:
startsmbfilepwent_internal: unable to open file /etc/smbpasswd. Error was No such file or directory
Added user ash.

Î âåëèêèé ÷åëîâåê! õîòü ÷òî-òî ïîíÿòíîå íüþáó! ñäåëàë êàê âû ñêàçàëè, ïîëó÷èëîñü, ÷òî ÷òî íàïèñàíî â ëîãå.
ïîòîì ïîïðîáîâàë çàêîíåêòèòñÿ ÷åðåç ñàìáó è îïÿòü ñòàðîå ñîîáùåíèå. Îíî âî âëîæåíèè.
Ââîäèë êàê smb://192.168.1.1/
Áëèí, ïðè ýòîì øàðà â âèäå ôëåøêè ñïîêîéíî âèäíà íà ïèñþêå â ñåòåâîì îêðóæåíèè. Íà ìàêå îíà òîæå âèäíà, êàê WL500G, íî ïðè ïîïûòêå çàêîíåêòèòñÿ âûëåçàåò îêîøêî â ïðåäëîæåíèåì ââåñòè ïàðîëü è èìÿ. Êàêîå áû èìÿ íå ââîäèë ñ ïàðîëåì, ðåçóëüòàò íóëåâîé.
ãîëîâó ñëîìàþ óæå ñêîðî ñ ýòèì àñóñîì

[antua]

Âñåì âëàäåëüöàì Ìàêîâ è èìåþùèõ ïðîáëåìû ñ øàðàìè âîòêíóòûìè â àñóñ. âîò ðåøåíèå ïðîáëåìû!
Ok, I've had the same problem, error -36.

This is where I found a solution, hope it helps others too.

http://docs.info.apple.com/article.html?artnum=301580

"Mac OS X 10.4: Error -36 alert displays when connecting to a Samba or Windows server
After upgrading from Mac OS X 10.3.x to Mac OS X 10.4, you may get an error message when you try to connect to a Samba or Windows (SMB/CIFS) server. A Samba or Windows (SMB/CIFS) server includes servers operating on Microsoft Windows and other operating systems that use Samba for SMB/CIFS services.

If the connection is unsuccessful, the following error message may appear:

The Finder cannot complete the operation because some of the data in smb://........ could not be read or written. (Error code -36).
If you check the Console (/Applications/Utilities/), you will also see this error message:

mount_smbfs: session setup phase failed
This error can occur if your Mac OS X 10.4 client is trying to connect to a Samba or Windows (SMB/CIFS) server that only supports plain text passwords. If you do not see the above message in the Console, you are not experiencing this issue and should try normal troubleshooting to isolate the source of the issue.

Unlike Mac OS X 10.3, the Mac OS X 10.4 SMB/CIFS client by default only supports encrypted passwords. Most modern Samba or Windows (SMB/CIFS) servers use encrypted passwords by default, while some Samba servers might have to be reconfigured.

You should consider contacting the owner or system administrator of the Samba or Windows (SMB/CIFS) server to which you are trying to connect and encourage them to disable plain text passwords and start using encrypted ones. If the server cannot be reconfigured to support encrypted passwords, you can configure Mac OS X 10.4 SMB/CIFS client to send plain text passwords.

Warning: If you configure your computer to allow connections to Samba or Windows (SMB/CIFS) servers using plain text passwords, when you attempt to make any connection to such a Samba or Windows (SMB/CIFS) server, your password will be sent "in the clear". This means that it is possible for someone who is monitoring your connection to see your password. This could lead to someone compromising the Samba or Windows (SMB/CIFS) server. We strongly recommend that you configure your Samba or Windows (SMB/CIFS) servers to exclusively use encrypted passwords.

Follow the steps below to configure your computer to use plain text passwords to make SMB/CIFS connections when the specified Samba or Windows (SMB/CIFS) server does not support encrypted passwords. (You must be an administrator to do these steps.)

Make sure that you are not currently connected to any Samba or Windows (SMB/CIFS) servers and that you do not have any Samba or Windows-related error messages open.
Open the Terminal (/Applications/Utilities/).
At the prompt, type: sudo pico /etc/nsmb.conf
Press Return.
Enter your password when prompted, then press Return again.
You should see an empty file and a "New File" notice at the bottom of the pico window. If you do not see the "New File" notice, this file already exists.
Enter the following into the file so that it appears as follows:

[default]
minauth=none


Save the file (press Control-O), press Return, then exit pico (Control-X).
Type: sudo chmod a+r /etc/nsmb.conf
Press Return.
Restart your computer."

Cheers.
ïîñëå íåäåëè ïîèñêîâ è ïëÿñîê ñ áóáíàìè âñå çàðàáîòàëî! òåïåðü ÿ óäîâëåòâîðåí ïîêóïêîé ýòîãî ðîóòåðà íà âñå 100%

[BuHT]

ó ìåíÿ è ìàê è âèíäà ñïîêîéíî ïîäêëþ÷àþòñÿ ê øàðàì ïî äó÷åòíûìè çàïèñÿìè òåõ þçåðîâ êîòîðûõ ââåë ÷åðåç smbpasswd

êàê ñ ìàêîñüþ 10.4.2 òàê è ñ 10.4.10 (êàæåòñÿ ýòà ïîñëåäíÿ, ïîçàâ÷åðà àïäåéò ñêà÷àë è ïîñòàâèë) áåç ïðîáëåì êîíåê÷óñü ê àñóñó. è óêàçàííîé âàìè ñòðîêè â íàñòðîéêàõ ñàìáû íåò.
ïðàâäà ó ìåíÿ ñòîèò ñàìáà 3

[antua]

ó ìåíÿ è ìàê è âèíäà ñïîêîéíî ïîäêëþ÷àþòñÿ ê øàðàì ïî äó÷åòíûìè çàïèñÿìè òåõ þçåðîâ êîòîðûõ ââåë ÷åðåç smbpasswd

êàê ñ ìàêîñüþ 10.4.2 òàê è ñ 10.4.10 (êàæåòñÿ ýòà ïîñëåäíÿ, ïîçàâ÷åðà àïäåéò ñêà÷àë è ïîñòàâèë) áåç ïðîáëåì êîíåê÷óñü ê àñóñó. è óêàçàííîé âàìè ñòðîêè â íàñòðîéêàõ ñàìáû íåò.
ïðàâäà ó ìåíÿ ñòîèò ñàìáà 3

íó òàê áàòåíüêà! ñ òðåòüåé ñàìáîé ÿ áû òîæå íàâåðíîå êîíåêòèëñÿ áåçî âñÿêèõ øàìàíñòâ.
Êñòàòè, à êàê âû åå ñòàâèëè? â÷åðà ïîïðîáîâàë, íî íå ïîëó÷èëîñü.

[Kesha]

Ãîñïîäà, ïîäñêàæèòå ïîæàëóéñòà, åñòü ASUS WL-500g Premium, ïðîøèâêà 1.9.2.7-7g. Íóæíî âèäåòü áîëüøîé USB-äèñê (1 Òá, NTFS, àðõèâ) òîëüêî äëÿ ÷òåíèÿ ÷åðåç Samba. Âîçìîæíî ýòî?

Ðàçìå÷àòü ïîä ext3 íå õî÷åòñÿ ïîòîìó ÷òî:
1) äèñê ïðàêòè÷åñêè ïîëíûé, à ýòî çíà÷èò íóæíî êóäà-òî ñëèòü 1 Òá, à ïîòîì çàëèòü åãî îáðàòíî;
2) êîìïà ñ Linux íåò (íî åñòü ìíîãî âèíäîâûõ), è äëÿ òîãî ÷òîáû çàëèâàòü íîâûå (î÷åíü áîëüøèå) ôàéëû íà âèíò, ïðèäåòñÿ ñòàâèòü êóäà-òî Linux (ôàêòè÷åñêè òîëüêî äëÿ ýòîãî) - íåóäîáíî.

Åñëè ÿ íå îøèáàþñü â ïîñëåäíåé âåðñèè ôèðìåííîé ïðîøèâêè ñòîèò íîâàÿ Samba è ïîçâîëÿåò è ÷èòàòü è ïèñàòü NTFS-äèñêè. Ìîæíî ëè ïðèêðóòèòü ê 1.9.2.7-7g íîâóþ ñàìáó?