virtual server does not work on modified router

[Wisi]

I've got a wl-500g deluxe router from our provider in romania. we got the password to it, they didn't like it, but they gave it to us.

if I change the settings under nat -> virtual server like I did @ home it doesn't affect status -> port forwarding [look @ pictures below]

someone has an idea how to check for mistakes in this case. I think they modified the router somehow deep that it has no influence what you do on some pages in the interface.

for example you can't change the remote wan port, it is faded out [last picture below]

here is the logfile, maybe someone can read something out of it:

Jan 1 02:00:04 syslogd started: BusyBox v1.00 (2005.10.19-16:07+0000)
Jan 1 02:00:04 kernel: TCP: Hash tables configured (established 2048 bind 4096)
Jan 1 02:00:04 kernel: GRE over IPv4 tunneling driver
Jan 1 02:00:04 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack
Jan 1 02:00:04 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 02:00:04 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 02:00:04 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 02:00:04 kernel: ipt_time loading
Jan 1 02:00:04 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 02:00:04 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 02:00:04 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 02:00:04 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 02:00:04 kernel: FAT: bogus logical sector size 0
Jan 1 02:00:05 kernel: FAT: bogus logical sector size 0
Jan 1 02:00:05 kernel: NTFS: Unable to set blocksize 512.
Jan 1 02:00:05 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 02:00:05 kernel: Mounted devfs on /dev
Jan 1 02:00:05 kernel: Freeing unused kernel memory: 68k freed
Jan 1 02:00:05 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 02:00:05 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
Jan 1 02:00:05 kernel: PCI: Enabling device 01:03.0 (0004 -> 0006)
Jan 1 02:00:05 kernel: eth1: Broadcom BCM4320 802.11 Wireless Controller 3.90.23.0
Jan 1 02:00:05 kernel: set_promiscuity(master, 1)
Jan 1 02:00:05 kernel: device eth0 entered promiscuous mode
Jan 1 02:00:05 kernel: device vlan1 entered promiscuous mode
Jan 1 02:00:05 kernel: vlan0: dev_set_promiscuity(master, 1)
Jan 1 02:00:05 kernel: device vlan0 entered promiscuous mode
Jan 1 02:00:05 kernel: br0: port 2(vlan0) entering listening state
Jan 1 02:00:05 kernel: br0: port 1(vlan1) entering listening state
Jan 1 02:00:05 kernel: br0: port 2(vlan0) entering learning state
Jan 1 02:00:05 kernel: br0: port 1(vlan1) entering learning state
Jan 1 02:00:05 kernel: br0: port 2(vlan0) entering forwarding state
Jan 1 02:00:05 kernel: br0: topology change detected, propagating
Jan 1 02:00:05 kernel: br0: port 1(vlan1) entering forwarding state
Jan 1 02:00:05 kernel: br0: topology change detected, propagating
Jan 1 02:00:05 kernel: usb.c: registered new driver usbdevfs
Jan 1 02:00:05 kernel: usb.c: registered new driver hub
Jan 1 02:00:05 kernel: usb-uhci.c: $Revision: 1.275 $ time 19:24:12 Oct 19 2005
Jan 1 02:00:05 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 02:00:05 kernel: PCI: Enabling device 01:02.0 (0000 -> 0001)
Jan 1 02:00:05 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 2
Jan 1 02:00:05 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:05 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 02:00:05 kernel: hub.c: USB hub found
Jan 1 02:00:05 kernel: hub.c: 2 ports detected
Jan 1 02:00:05 kernel: PCI: Enabling device 01:02.1 (0000 -> 0001)
Jan 1 02:00:05 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 2
Jan 1 02:00:05 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:05 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 02:00:05 kernel: hub.c: USB hub found
Jan 1 02:00:05 kernel: hub.c: 2 ports detected
Jan 1 02:00:05 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 02:00:05 kernel: PCI: Enabling device 01:02.2 (0000 -> 0002)
Jan 1 02:00:05 kernel: ehci_hcd 01:02.2: PCI device 1106:3104
Jan 1 02:00:05 kernel: ehci_hcd 01:02.2: irq 2, pci mem c00a6000
Jan 1 02:00:05 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 02:00:05 kernel: PCI: 01:02.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 02:00:05 kernel: ehci_hcd 01:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 02:00:05 kernel: hub.c: USB hub found
Jan 1 02:00:05 kernel: hub.c: 4 ports detected
Jan 1 02:00:06 kernel: usb.c: registered new driver usblp
Jan 1 02:00:06 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 02:00:07 kernel: br0: retransmitting tcn bpdu
Jan 1 02:00:07 kernel: usb.c: registered new driver audio
Jan 1 02:00:07 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 02:00:07 dnsmasq[73]: read /etc/hosts - 5 addresses
Jan 1 02:00:07 dnsmasq[73]: reading /tmp/resolv.conf
Jan 1 02:00:07 dnsmasq[73]: using nameserver xxx
Jan 1 02:00:07 dnsmasq[73]: using nameserver xxx
Jan 1 02:00:09 dropbear[110]: Running in background
Jan 12 23:37:35 ntp client: Synchronizing time with xxx...

[Wisi]

solved the problem

the technician from our provider changed the behavior of the router and now it is working