HP LaserJet 1000/1005/1020 not working: sort of solution

[pardonfiu]

Hello

I have a problem with my WL-500g router. It can't recognize my HP LaserJet 1020, altough I saw this device as WORKING in the compatibility list.

Tested: WORKING
Model: WL-500g deluxe
Firmware: 1.9.2.7

Device:
Brandname: HP (Hewlett Packard)
Brandtype: HP Laser Jet 1020 (usb)
URL To manufacturer: http://www.hp.com

I've tried everything but still can't get it working, please help me.
I'm using Oleg's firmware 1.9.2.7-6b.

I have been searching the forum and the net for the solution but found nothing so far.

I quote the status log of the router here and the running processes (ps ax).

status:

Jan 1 01:00:05 syslogd started: BusyBox v1.00 (2005.05.11-18:29+0000)
Jan 1 01:00:05 kernel: 0x003e0000-0x003f0000 : "config"
Jan 1 01:00:05 kernel: sflash: chipcommon not found
Jan 1 01:00:05 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Jan 1 01:00:05 kernel: IP Protocols: ICMP, UDP, TCP
Jan 1 01:00:05 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Jan 1 01:00:05 kernel: TCP: Hash tables configured (established 1024 bind 2048)
Jan 1 01:00:05 kernel: ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
Jan 1 01:00:05 kernel: ip_conntrack_pptp version 1.9 loaded
Jan 1 01:00:05 kernel: ip_nat_pptp version 1.5 loaded
Jan 1 01:00:05 kernel: ip_tables: (C) 2000-2002 Netfilter core team
Jan 1 01:00:05 kernel: ipt_time loading
Jan 1 01:00:05 dnsmasq[53]: reading /tmp/resolv.conf
Jan 1 01:00:05 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Jan 1 01:00:05 kernel: IPv6 v0.8 for NET4.0
Jan 1 01:00:05 kernel: IPv6 over IPv4 tunneling driver
Jan 1 01:00:05 kernel: NET4: Ethernet Bridge 008 for NET4.0
Jan 1 01:00:05 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
Jan 1 01:00:05 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan 1 01:00:05 kernel: FAT: bogus logical sector size 47872
Jan 1 01:00:05 kernel: FAT: bogus logical sector size 47872
Jan 1 01:00:05 kernel: NTFS: Unable to set blocksize 512.
Jan 1 01:00:05 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan 1 01:00:05 kernel: Mounted devfs on /dev
Jan 1 01:00:05 kernel: Freeing unused kernel memory: 72k freed
Jan 1 01:00:05 kernel: Warning: unable to open an initial console.
Jan 1 01:00:05 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan 1 01:00:05 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
Jan 1 01:00:05 kernel: eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
Jan 1 01:00:05 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
Jan 1 01:00:05 kernel: eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.23.0
Jan 1 01:00:05 kernel: device eth0 entered promiscuous mode
Jan 1 01:00:05 kernel: device eth2 entered promiscuous mode
Jan 1 01:00:05 kernel: br0: port 2(eth2) entering listening state
Jan 1 01:00:05 kernel: br0: port 1(eth0) entering listening state
Jan 1 01:00:05 kernel: br0: port 2(eth2) entering learning state
Jan 1 01:00:05 kernel: br0: port 1(eth0) entering learning state
Jan 1 01:00:05 kernel: br0: port 2(eth2) entering forwarding state
Jan 1 01:00:05 kernel: g
Jan 1 01:00:05 kernel: br0: port 1(eth0) entering forwarding state
Jan 1 01:00:05 kernel: br0: topology change detected, propagating
Jan 1 01:00:06 kernel: usb.c: registered new driver usbdevfs
Jan 1 01:00:06 kernel: usb.c: registered new driver hub
Jan 1 01:00:06 kernel: usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
Jan 1 01:00:06 kernel: usb-ohci.c: usb-00:04.0, PCI device 14e4:4715
Jan 1 01:00:06 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 01:00:06 kernel: hub.c: USB hub found
Jan 1 01:00:06 kernel: hub.c: 2 ports detected
Jan 1 01:00:07 kernel: hub.c: new USB device 00:04.0-1, assigned address 2
Jan 1 01:00:07 kernel: usb.c: USB device not accepting new address=2 (error=-145)
Jan 1 01:00:07 kernel: hub.c: new USB device 00:04.0-1, assigned address 3
Jan 1 01:00:07 kernel: usb.c: USB device not accepting new address=3 (error=-145)
Jan 1 01:00:08 kernel: lp0: using parport0 (polling).
Jan 1 01:00:08 kernel: usb.c: registered new driver usblp
Jan 1 01:00:08 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 01:00:10 kernel: usb.c: registered new driver audio
Jan 1 01:00:10 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 01:00:10 kernel: Linux video capture interface: v1.00
Jan 1 01:00:11 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 01:00:11 kernel: Initializing USB Mass Storage driver...
Jan 1 01:00:11 kernel: usb.c: registered new driver usb-storage
Jan 1 01:00:11 kernel: USB Mass Storage support registered.
Jan 1 01:00:12 pppd[83]: Plugin rp-pppoe.so loaded.
Jan 1 01:00:12 pppd[83]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
Jan 1 01:00:12 pppd[84]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:00:13 kernel: lp driver: get device ID
Jan 1 01:00:13 kernel: neg fail
Jan 1 01:00:14 dropbear[97]: Running in background
Jan 1 01:00:14 FTP server: daemon is started
Jan 1 01:00:17 pppd[84]: PPP session is 44499
Jan 1 01:00:17 pppd[84]: Using interface ppp0
Jan 1 01:00:17 pppd[84]: Connect: ppp0 <--> eth1
Jan 1 01:00:19 kernel: lp driver: get device ID
Jan 1 01:00:19 kernel: neg fail
Jan 1 01:00:19 kernel: neg fail
Jan 1 01:00:20 pppd[84]: PAP authentication succeeded
Jan 1 01:00:20 pppd[84]: peer from calling number 00:13:19:BA:AE:1A authorized
Jan 1 01:00:20 pppd[84]: local IP address 87.97.40.161
Jan 1 01:00:20 pppd[84]: remote IP address 213.163.27.11
Jan 1 01:00:20 pppd[84]: primary DNS address 213.163.34.66
Jan 1 01:00:20 pppd[84]: secondary DNS address 62.77.203.10
Jan 1 01:00:20 dnsmasq[53]: read /etc/hosts - 4 addresses
Jan 1 01:00:20 dnsmasq[53]: reading /tmp/resolv.conf
Jan 1 01:00:20 dnsmasq[53]: using nameserver 62.77.203.10#53
Jan 1 01:00:20 dnsmasq[53]: using nameserver 213.163.34.66#53
Jan 1 01:00:21 PPPoE: connect to ISP
Dec 29 18:39:19 dnsmasq[53]: DHCPREQUEST(br0) 192.168.1.2 00:0e:35:d9:fa:33
Dec 29 18:39:19 dnsmasq[53]: DHCPACK(br0) 192.168.1.2 00:0e:35:d9:fa:33 pardonnote
Dec 29 18:39:21 dropbear[115]: Child connection from ::ffff:192.168.1.2:2489
Dec 29 18:39:21 dnsmasq[53]: DHCPREQUEST(br0) 192.168.1.2 00:0e:35:d9:fa:33
Dec 29 18:39:21 dnsmasq[53]: DHCPACK(br0) 192.168.1.2 00:0e:35:d9:fa:33 pardonnote
Dec 29 18:39:22 ntp client: Synchronizing time with time.nist.gov ...

and the running processes

PID Uid VmSize Stat Command
1 admin 668 S /sbin/init
2 admin SW [keventd]
3 admin SWN [ksoftirqd_CPU0]
4 admin SW [kswapd]
5 admin SW [bdflush]
6 admin SW [kupdated]
7 admin SW [mtdblockd]
41 admin 292 S telnetd
46 admin 468 S httpd eth1
49 admin 340 S klogd
53 nobody 484 S dnsmasq
54 admin 388 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
56 admin 532 S nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
59 admin SW [khubd]
68 admin 276 S lpd
70 admin 260 S p9100d -f /dev/usb/lp0 0
72 admin 260 S p9101d -f /dev/printers/0 1
75 admin 340 S waveservermain
77 admin 348 S rcamdmain
84 admin 640 S pppd file /tmp/ppp/options.wan0
86 admin 324 S infosvr br0
87 admin 440 S watchdog
88 admin 340 S ntp
97 admin 432 S dropbear
98 admin 528 S /usr/sbin/stupid-ftpd -f /usr/local/stupid-ftpd.conf
120 admin 560 S upnp -D -L br0 -W ppp0
173 admin 724 S dropbear

Thank you for your help!