Results 1 to 5 of 5

Thread: Help needed: not mount anymore

  1. #1

    Help needed: not mount anymore

    Hi,

    I did a lot of stuff with my WL-Hdd to get it running. Now, I think I've did something very wrong:
    It doesn't mount anything anymore.

    I tried
    nvram-clear and recover, tried different firmware versions (Oleg and Asus original), but cannot get it working again.

    What have I got to do?
    What content of which files or commands do you need to provide further help?

    Please help
    Brennivin

    After reboot, the following commands are showing the results:

    df:

    [admin@(none) root]$ df
    Filesystem 1k-blocks Used Available Use% Mounted on
    /dev/root 2816 2816 0 100% /

    flashfs list:
    [admin@(none) root]$ flashfs list
    tmp/local
    tmp/local/root

    fdisk -l:
    [admin@(none) root]$ fdisk -l

    Disk /dev/ide/host0/bus0/target0/lun0/disc: 80.0 GB, 80060424192 bytes
    255 heads, 63 sectors/track, 9733 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot Start End Blocks Id System
    /dev/ide/host0/bus0/target0/lun0/part1 1 9501 76316751 83 Linux
    /dev/ide/host0/bus0/target0/lun0/part2 9502 9733 1863540 82 Linux swap

    [admin@(none) root]$ mount /dev/ide/host0/bus0/target0/lun0/part1 /opt
    mount: Mounting /dev/ide/host0/bus0/target0/lun0/part1 on /opt failed: Invalid argument


    nvram show | sort:
    audio_enable=0
    autofw_desc_x=
    autofw_enable_x=0
    autofw_inport_x=
    autofw_inproto_x=
    autofw_num_x=0
    autofw_outport_x=
    autofw_outproto_x=
    autofw_port0=
    boardnum=asusX
    boardtype=bcm94710dev
    boot_wait=on
    clkfreq=125
    console_loglevel=0
    ddns_enable_x=0
    ddns_hostname_x=
    ddns_passwd_x=
    ddns_server_x=
    ddns_status_t=
    ddns_username_x=
    ddns_wildcard_x=0
    dhcp_dns1_x=
    dhcp_domain=wan
    dhcp_enable_x=1
    dhcp_end=192.168.1.254
    dhcp_gateway_x=
    dhcp_lease=86400
    dhcp_start=192.168.1.2
    dhcp_static_x=0
    dhcp_staticip_x=
    dhcp_staticmac_x=
    dhcp_staticnum_x=0
    dhcp_wins=wan
    dhcp_wins_x=
    dl_ram_addr=a0001000
    dmz_ip=
    dmz_ipaddr=
    dr_default_x=1
    dr_static_matric_x=1
    dr_static_rip_x=0
    dr_staticgateway_x=
    dr_staticipaddr_x=
    dr_staticnetmask_x=0
    dr_staticnum_x=0
    et0macaddr=xx:xx:xx:xx:xx:xx
    et0mdcport=0
    et0phyaddr=0
    et1macaddr=xx:xx:xx:xx:xx:xx
    et1mdcport=1
    et1phyaddr=01
    ezc_enable=1
    ezc_version=2
    filter_client0=
    filter_lw_date_x=1111111
    filter_lw_default_x=ACCEPT
    filter_lw_dstip_x=
    filter_lw_dstport_x=
    filter_lw_icmp_x=
    filter_lw_num_x=0
    filter_lw_proto_x=
    filter_lw_srcip_x=
    filter_lw_srcport_x=
    filter_lw_time_x=00002359
    filter_maclist=
    filter_macmode=deny
    filter_wl_date_x=1111111
    filter_wl_default_x=ACCEPT
    filter_wl_dstip_x=
    filter_wl_dstport_x=
    filter_wl_icmp_x=
    filter_wl_num_x=0
    filter_wl_proto_x=
    filter_wl_srcip_x=
    filter_wl_srcport_x=
    filter_wl_time_x=00002359
    firmver=1.9.2.7
    forward_port0=
    fw_disable=0
    fw_enable_x=1
    fw_log_x=none
    fw_lw_enable_x=0
    fw_wl_enable_x=0
    hardware_version=WL300-02-03-01-20
    http_lanport=80
    http_passwd=xxxxxxxxxxxxxx
    http_username=xxxxxxxxxxxx
    http_wanport=
    infosvr_enable=0
    is_default=1
    is_modified=0
    lan_dhcp=0
    lan_dns_t=192.168.0.1
    lan_domain=
    lan_gateway=
    lan_gateway_t=192.168.0.1
    lan_hostname=
    lan_hwaddr=xx:xx:xx:xx:xx:xx
    lan_hwnames=
    lan_ifname=br0
    lan_ifnames=eth2
    lan_ifnames_t=eth2 eth1
    lan_ipaddr=192.168.1.1
    lan_ipaddr_t=192.168.0.106
    lan_lease=86400
    lan_lease_t=604800
    lan_netmask=255.255.255.0
    lan_netmask_t=255.255.255.0
    lan_proto=dhcp
    lan_proto_x=1
    lan_route=
    lan_stp=1
    lan_wins=
    log_ipaddr=
    log_level=0
    lpr_enable=0
    macfilter_enable_x=disabled
    macfilter_list_x=
    macfilter_num_x=0
    misc_conntrack_x=4096
    misc_http_x=0
    misc_httpport_x=8080
    misc_lpr_x=0
    misc_natlog_x=0
    misc_ping_x=0
    no_br=0
    ntp_interval_x=2
    ntp_server0=time.nist.gov
    ntp_server1=
    ntp_server=192.5.41.40 192.5.41.41 133.100.9.2
    ntp_servers=time.nist.gov
    os_date=Oct 11 2005
    os_flash_addr=bfc40000
    os_name=linux
    os_ram_addr=80001000
    os_server=
    os_version=3.91.7.0
    pmon_ver=PMON 3.11.19.0
    printer_ifname=usb
    printer_model_t=
    printer_status_t=
    printer_user_t=
    productid=WLHDD
    qos_enable_x=0
    qos_ipaddr_x=
    qos_maxbw_x=
    qos_minbw_x=
    qos_port_x=
    qos_rulenum_x=0
    qos_umaxbw_x=
    qos_uminbw_x=
    qos_uport_x=
    qos_urulenum_x=0
    raw_enable=0
    regulation_domain=0x47TW
    rescueflag=disable
    restore_defaults=0
    router_disable=1
    scratch=a0180000
    sdram_config=0x0000
    sdram_init=0x0419
    sdram_ncdl=0x00000000
    sdram_refresh=0x8040
    snmp_community=public
    snmp_contact=Administrator
    snmp_enable=0
    snmp_location=Unknown
    sp_battle_ips=1
    sr_enable_x=0
    sr_gateway_x=
    sr_if_x=
    sr_ipaddr_x=
    sr_matric_x=
    sr_netmask_x=
    sr_num_x=0
    sr_rip_x=0
    stats_server=
    telnet_enable=1
    time_interval=20
    time_zone=MEZ-1MESZ
    timer_interval=3600
    upnp_enable=1
    url_date_x=1111111
    url_enable_x=0
    url_keyword_x=
    url_num_x=0
    url_time_x=00002359
    usb_audio_device=
    usb_bannum_x=0
    usb_device=1
    usb_ftp_device=
    usb_ftpanonymous_x=1
    usb_ftpbanip_x=
    usb_ftpenable_x=1
    usb_ftpmax_x=12
    usb_ftpmaxuser_x=
    usb_ftpnum_x=0
    usb_ftppasswd_x=
    usb_ftpport_x=21
    usb_ftprights_x=
    usb_ftpscript_x=
    usb_ftpstaytimeout_x=240
    usb_ftpsuper_x=0
    usb_ftptimeout_x=120
    usb_ftpusername_x=
    usb_nfsenable_x=0
    usb_nfsnum_x=0
    usb_smbcpage_x=
    usb_smbcset_x=
    usb_smbenable_x=1
    usb_smbhidden_x=1
    usb_smbwrkgrp_x=Workgroup
    usb_storage_device=
    usb_web_device=5a9/a518/100
    usb_web_flag=2
    usb_webactivex_x=7777
    usb_webattach_x=1
    usb_webcaption_x=Web Camera Live Demo!!!
    usb_webdriver_x=1
    usb_webenable_x=1
    usb_webfresh_x=1
    usb_webhttpcheck_x=0
    usb_webhttpport_x=7776
    usb_webimage_x=1
    usb_webmode_x=1
    usb_webmserver_x=
    usb_webrectime_x=0
    usb_webremote1_x=
    usb_webremote2_x=
    usb_webremote3_x=
    usb_webremote4_x=
    usb_webremote5_x=
    usb_webremote6_x=
    usb_webremote_x=0
    usb_websecurity_date_x=0000000
    usb_websecurity_time_x=
    usb_websecurity_x=0
    usb_websendto_x=
    usb_websense_x=1
    usb_websubject_x=Motion detection alert!!!
    vlan_enable=0
    vts_desc_x=
    vts_enable_x=1
    vts_ipaddr_x=
    vts_lport_x=
    vts_num_x=0
    vts_port_x=
    vts_proto_x=
    vts_protono_x=
    wan0_desc=Default Connection
    wan0_dns1_x=
    wan0_dns2_x=
    wan0_dns_t=
    wan0_dnsenable_x=1
    wan0_domain=
    wan0_etherspeed_x=auto
    wan0_gateway=
    wan0_gateway_t=
    wan0_heartbeat_x=
    wan0_hostname=
    wan0_hwaddr=
    wan0_hwaddr_x=
    wan0_hwname=
    wan0_ifname=eth1
    wan0_ifnames=eth1
    wan0_ipaddr=
    wan0_ipaddr_t=
    wan0_lease=86400
    wan0_mode_x=2
    wan0_nat_x=0
    wan0_netmask=
    wan0_netmask_t=
    wan0_pppoe_ac=
    wan0_pppoe_demand=0
    wan0_pppoe_idletime=1800
    wan0_pppoe_ifname=
    wan0_pppoe_keepalive=0
    wan0_pppoe_mru=1492
    wan0_pppoe_mtu=1492
    wan0_pppoe_options_x=
    wan0_pppoe_passwd=
    wan0_pppoe_relay_x=0
    wan0_pppoe_service=
    wan0_pppoe_txonly_x=0
    wan0_pppoe_username=
    wan0_primary=1
    wan0_proto=dhcp
    wan0_proto_t=
    wan0_route=
    wan0_route_x=IP_Bridged
    wan0_status_t=Disconnected
    wan0_unit=0
    wan0_wins=
    wan_desc=
    wan_dns1_x=
    wan_dns2_x=
    wan_dns=
    wan_dns_t=
    wan_dnsenable_x=1
    wan_domain=
    wan_etherspeed_x=auto
    wan_gateway=
    wan_gateway_t=
    wan_heartbeat_x=
    wan_hostname=
    wan_hwaddr=
    wan_hwaddr_x=
    wan_hwname=
    wan_ifname=eth1
    wan_ifnames=eth1
    wan_ipaddr=
    wan_ipaddr_t=
    wan_lease=86400
    wan_mode_x=2
    wan_nat_x=0
    wan_netmask=
    wan_netmask_t=
    wan_pppoe_ac=
    wan_pppoe_demand=0
    wan_pppoe_idletime=1800
    wan_pppoe_ifname=
    wan_pppoe_keepalive=0
    wan_pppoe_mru=1492
    wan_pppoe_mtu=1492
    wan_pppoe_options_x=
    wan_pppoe_passwd=
    wan_pppoe_relay_x=0
    wan_pppoe_service=
    wan_pppoe_txonly_x=0
    wan_pppoe_username=
    wan_primary=0
    wan_proto=dhcp
    wan_proto_t=
    wan_route=
    wan_route_x=IP_Bridged
    wan_status_t=Disconnected
    wan_unit=0
    wan_wins=
    watchdog=3000
    **snipped the wlan settings**
    x_Setting=1

  2. #2
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Hace you "formatted" filesystem? I mean, have you executed
    Code:
    mke2fs -j /dev/ide/host0/bus0/target0/lun0/part1
    ?

  3. #3
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    P.S. check kernel messages using a dmesg command or system log.

  4. #4
    [admin@(none) root]$ mke2fs -j /dev/ide/host0/bus0/target0/lun0/part1
    mke2fs 1.35 (28-Feb-2004)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    9551872 inodes, 19079187 blocks
    953959 blocks (5.00%) reserved for the super user
    First data block=0
    583 block groups
    32768 blocks per group, 32768 fragments per group
    16384 inodes per group
    Superblock backups stored on blocks:
    32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
    4096000, 7962624, 11239424

    Writing inode tables: Terminated


    [admin@(none) root]$ dmesg
    cpu probe
    prom init
    cpu report
    CPU revision is: 00024000
    Loading BCM4710 MMU routines.
    Primary instruction cache 8kb, linesize 16 bytes (2 ways)
    Primary data cache 4kb, linesize 16 bytes (2 ways)
    Linux version 2.4.20 (root@omnibook) (gcc version 3.2.3 with Broadcom modifications) #13 Tue Oct 11 23:36:49 MSD 2005
    Setting the PFC value as 0x15
    Determined physical RAM map:
    memory: 01000000 @ 00000000 (usable)
    On node 0 totalpages: 4096
    zone(0): 4096 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200
    CPU: BCM4710 rev 0 at 125 MHz
    !unable to setup serial console!
    Calibrating delay loop... 82.94 BogoMIPS
    Memory: 13868k/16384k available (1767k kernel code, 2516k reserved, 248k data, 72k init, 0k highmem)
    Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
    Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Checking for 'wait' instruction... unavailable.
    POSIX conformance testing by UNIFIX
    PCI: Fixing up bus 0
    PCI: Fixing up bridge
    PCI: Fixing up bus 1
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    Journalled Block Device driver loaded
    devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    NTFS driver v1.1.22 [Flags: R/O]
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    loop: loaded (max 8 devices)
    PPP generic driver version 2.4.2
    PPP Deflate Compression module registered
    PPP BSD Compression module registered
    MPPE/MPPC encryption/compression module registered
    Amd/Fujitsu Extended Query Table v1.1 at 0x0040
    Physically mapped flash: Swapping erase regions for broken CFI table.
    number of CFI chips: 1
    Flash device: 0x400000 at 0x1fc00000
    Physically mapped flash: squashfs filesystem found at block 942
    Creating 5 MTD partitions on "Physically mapped flash":
    0x00000000-0x00040000 : "pmon"
    0x00040000-0x003e0000 : "linux"
    0x000eba70-0x003e0000 : "rootfs"
    0x003f0000-0x00400000 : "nvram"
    0x003e0000-0x003f0000 : "config"
    sflash: chipcommon not found
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 1024 bind 2048)
    ip_conntrack version 2.1 (128 buckets, 1024 max) - 344 bytes per conntrack
    ip_conntrack_pptp version 1.9 loaded
    ip_nat_pptp version 1.5 loaded
    ip_tables: (C) 2000-2002 Netfilter core team
    ipt_time loading
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    IPv6 v0.8 for NET4.0
    IPv6 over IPv4 tunneling driver
    NET4: Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    All bugs added by David S. Miller <davem@redhat.com>
    FAT: bogus logical sector size 25088
    FAT: bogus logical sector size 25088
    NTFS: Unable to set blocksize 512.
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 72k freed
    Warning: unable to open an initial console.
    Algorithmics/MIPS FPU Emulator v1.5
    Uniform Multi-Platform E-IDE driver Revision: 6.31
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PDC20265: IDE controller on PCI bus 01 dev 08
    PCI: Enabling device 01:01.0 (0004 -> 0007)
    PDC20265: chipset revision 2
    PDC20265: not 100% native mode: will probe irqs later
    PDC20265: ROM enabled at 0x000d0000
    PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
    PDC20265: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
    ide0: BM-DMA at 0x0140-0x0147, BIOS settings: hdaMA, hdbio
    ide1: BM-DMA at 0x0148-0x014f, BIOS settings: hdcio, hddio
    hda: SAMSUNG MP0804H, ATA DISK drive
    ide2: ports already in use, skipping probe
    ide3: ports already in use, skipping probe
    ide4: ports already in use, skipping probe
    ide5: ports already in use, skipping probe
    ide0 at 0x100-0x107,0x10a on irq 6
    blk: queue c00262e8, I/O limit 4095Mb (mask 0xffffffff)
    hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=9733/255/63, UDMA(33)
    Partition check:
    /dev/ide/host0/bus0/target0/lun0: p1 p2
    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
    eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.7.0
    PCI: Enabling device 01:02.0 (0004 -> 0006)
    eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.23.0
    device eth2 entered promiscuous mode
    device eth1 entered promiscuous mode
    br0: port 2(eth1) entering learning state
    br0: port 1(eth2) entering learning state
    br0: port 2(eth1) entering forwarding state
    br0: topology change detected, propagating
    br0: port 1(eth2) entering forwarding state
    br0: topology change detected, propagating
    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    usb-ohci.c: USB OHCI at membase 0xb8004000, IRQ 2
    usb-ohci.c: usb-00:04.0, PCI device 14e4:4715
    usb.c: new USB bus registered, assigned bus number 1
    hub.c: USB hub found
    hub.c: 2 ports detected
    usb.c: registered new driver usblp
    printer.c: v0.13: USB Printer Device Class driver
    hub.c: new USB device 00:04.0-1, assigned address 2
    Linux video capture interface: v1.00
    usb.c: USB device 2 (vend/prod 0x5a9/0xa518) is not claimed by any active driver.
    SCSI subsystem driver Revision: 1.00
    Initializing USB Mass Storage driver...
    usb.c: registered new driver usb-storage
    USB Mass Storage support registered.
    eth2: no IPv6 routers present
    eth1: no IPv6 routers present
    br0: no IPv6 routers present
    VFS: Can't find ext3 filesystem on dev ide0(3,1).
    MSDOS FS: Using codepage 950
    MSDOS FS: IO charset cp950
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:01.
    FAT: freeing iocharset=cp950
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:01.
    VFS: Can't find ext3 filesystem on dev ide0(3,2).
    MSDOS FS: Using codepage 950
    MSDOS FS: IO charset cp950
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:02.
    FAT: freeing iocharset=cp950
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:02.
    usb.c: registered new driver ov51x
    ov51x.c: USB OV518+ video device found
    ov51x.c: Device revision 0
    ov51x.c: Compression required with OV518...enabling
    ov51x.c: Sensor is an OV7620
    ov51x.c: Device at usb-00:04.0-1 registered to minor 0
    ov51x.c: v1.65-1.10-mark : ov51x USB Camera Driver
    ov511_decomp.c: v1.6 : OV511 Decompression Module
    ov518_decomp.c: v1.3 : OV518 Decompression Module
    VFS: Can't find ext3 filesystem on dev ide0(3,1).
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:01.
    FAT: bogus logical sector size 0
    VFS: Can't find a valid FAT filesystem on dev 03:01.
    SQUASHFS error: Can't find a SQUASHFS superblock on ide0(3,1)
    VFS: Can't find ext3 filesystem on dev ide0(3,1).
    VFS: Can't find ext3 filesystem on dev ide0(3,1).
    Out of Memory: Killed process 112 (mke2fs).


    Okay last message seems to me, that the "formatting" didn't work quite properly.
    I will next try to first turn on swap, and than do than the "formatting".

    I will keep you up to date.

  5. #5

    [Solved]: No mount anymore

    It seems to be solved, because:
    [admin@(none) root]$ df
    Filesystem 1k-blocks Used Available Use% Mounted on
    /dev/root 2816 2816 0 100% /
    /dev/discs/disc0/part1 75117788 32840 71269112 0% /tmp/harddisk

    Thanks to Oleg, but can you also explain to me, why this is so?

    Brennivin

Similar Threads

  1. no access to the router anymore - what to do?
    By fogg in forum WL-500g Q&A
    Replies: 20
    Last Post: 20-12-2008, 17:21
  2. Router doesn't see USB disk anymore
    By Styno in forum WL-500g Q&A
    Replies: 7
    Last Post: 15-08-2006, 09:37
  3. Unable to use WL-500g anymore
    By phedny in forum WL-500g Q&A
    Replies: 3
    Last Post: 23-05-2005, 16:39
  4. no ftp connection from wan anymore
    By 5over12 in forum WL-500g Q&A
    Replies: 31
    Last Post: 27-04-2005, 23:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •